scholarly journals Environmentally stable Er-fiber mode-locked pulse generation and amplification by spectrally filtered and phase-biased nonlinear amplifying long-loop mirror

Author(s):  
Zhengru Guo ◽  
Qiang Hao ◽  
Junsong Peng ◽  
Heping Zeng

We report on environmentally stable long-cavity ultrashort erbium-doped fiber lasers, which self-start mode-locking at quite low thresholds by using spectrally filtered and phase-biased nonlinear amplifying long-loop mirrors. By employing 100-m polarization-maintaining fiber (PMF) in the nonlinear loop, the fundamental repetition rate reaches 1.84 MHz and no practical limitation is found to further decrease the repetition rate. The filter used in the long loop not only suppresses Kelly sidebands of the solitons, but also eliminates the amplified spontaneous emission which exists widely in low-repetition-rate ultrafast fiber lasers. The bandwidth of the filter is optimized by using a numerical model. The laser emits approximately 3-ps pulses with an energy of 17.4 pJ, which is further boosted to $1.5~\unicode[STIX]{x03BC}\text{J}$ by using a fiber amplifier.

2017 ◽  
Vol 37 (2) ◽  
pp. 0206003 ◽  
Author(s):  
罗 浆 Luo Jiang ◽  
杨 松 Yang Song ◽  
郝 强 Hao Qiang ◽  
曾和平 Zeng Heping

2018 ◽  
Vol 47 (8) ◽  
pp. 803006
Author(s):  
李润敏 Li Runmin ◽  
宋有建 Song Youjian ◽  
师浩森 Shi Haosen ◽  
戴 雯 Dai Wen ◽  
李跃鹏 Li Yuepeng ◽  
...  

2017 ◽  
Vol 9 (3) ◽  
pp. 100 ◽  
Author(s):  
Fauziah Che Mat ◽  
Moh Yasin ◽  
Anas Abdul Latiff ◽  
Sulaiman Wadi Harun

All-fiber passively Q-switched fiber lasers have been demonstrated by using graphene oxide (GO) Q-switcher for possible applications in telecommunication, laser processing, fiber sensing and medical community. The GO material was obtained through a modified Hummers method from expanded acid washed graphite flakes and it was embedded into a polyvinyl alcohol (PVA) film to form a saturable absorber (SA) device. The Q-switched pulse operates at 1563.3 nm with a repetition rate that can be tuned from 44.33 kHz to 61.77 kHz as the pump power changes from 39 mW to 96 mW. The highest repetition rate of 61.77 kHz is achieved at a pump power of 96 mW and it is observed that the Q-switched pulse produced maximum pulse energy of 0.054 nJ and pulse width of 5.57 ?s at 96 mW pump power. Full Text: PDF ReferencesJ. Zayhowski and C. Dill, "Coupled-cavity electro-optically Q-switched Nd:YVO4 microchip lasers", Optics letters 20, 716 (1995). CrossRef C.-x. Gao, W. Zhao, Y.-s. Wang, S.-l. Zhu, G.-f. Chen, and Y.-g. Wang, "Passive Q-switched fiber laser with SESAM in ytterbium-doped double-clad fiber", 27th International congress on High-Speed Photography and Photonics, 62794G (2007). CrossRef M. Ahmed, N. Ali, Z. Salleh, A. Rahman, S. Harun, M. Manaf, "Q-switched erbium doped fiber laser based on single and multiple walled carbon nanotubes embedded in polyethylene oxide film as saturable absorber", Optics & Laser Technology 65, 25 (2015). CrossRef S. Harun, M. Ismail, F. Ahmad, M. Ismail, R. Nor, N. Zulkepely, et al., "A Q-switched erbium-doped fiber laser with a carbon nanotube based saturable absorber", Chinese Physics Letters 29, 114202 (2012). CrossRef A. Martinez and Z. Sun, "Nanotube and graphene saturable absorbers for fibre lasers", Nat Photon 7, 842 (2013). CrossRef J. Boguslawski, J. Sotor, G. Sobon, R. Kozinski, K. Librant, M. Aksienionek, et al., "Graphene oxide paper as a saturable absorber for Er- and Tm-doped fiber lasers", Photonics Research 3, 119 (2015). CrossRef H. Ahmad, F. D. Muhammad, M. Z. Zulkifli, and S. W. Harun, "Q-switched pulse generation from an all-f iber distributed Bragg reflector laser using graphene as saturable absorber", Chinese Optics Letters 11, 071401 (2013). CrossRef


2016 ◽  
Vol 34 (11) ◽  
pp. 2833-2837 ◽  
Author(s):  
Qiang Hao ◽  
Qingshan Zhang ◽  
Feihong Chen ◽  
Kangwen Yang ◽  
Heping Zeng

Sign in / Sign up

Export Citation Format

Share Document