scholarly journals Heat transfer in rapidly rotating convection with heterogeneous thermal boundary conditions

2017 ◽  
Vol 828 ◽  
pp. 601-629 ◽  
Author(s):  
Jon E. Mound ◽  
Christopher J. Davies

Convection in the metallic cores of terrestrial planets is likely to be subjected to lateral variations in heat flux through the outer boundary imposed by creeping flow in the overlying silicate mantles. Boundary anomalies can significantly influence global diagnostics of core convection when the Rayleigh number, $Ra$, is weakly supercritical; however, little is known about the strongly supercritical regime appropriate for planets. We perform numerical simulations of rapidly rotating convection in a spherical shell geometry and impose two patterns of boundary heat flow heterogeneity: a hemispherical $Y_{1}^{1}$ spherical harmonic pattern; and one derived from seismic tomography of the Earth’s lower mantle. We consider Ekman numbers $10^{-4}\leqslant E\leqslant 10^{-6}$, flux-based Rayleigh numbers up to ${\sim}800$ times critical, and a Prandtl number of unity. The amplitude of the lateral variation in heat flux is characterised by $q_{L}^{\ast }=0$, 2.3, 5.0, the peak-to-peak amplitude of the outer boundary heat flux divided by its mean. We find that the Nusselt number, $Nu$, can be increased by up to ${\sim}25\,\%$ relative to the equivalent homogeneous case due to boundary-induced correlations between the radial velocity and temperature anomalies near the top of the shell. The $Nu$ enhancement tends to become greater as the amplitude and length scale of the boundary heterogeneity are increased and as the system becomes more supercritical. This $Ra$ dependence can steepen the $Nu\propto Ra^{\unicode[STIX]{x1D6FE}}$ scaling in the rotationally dominated regime, with $\unicode[STIX]{x1D6FE}$ for our most extreme case approximately 20 % greater than the equivalent homogeneous scaling. Therefore, it may be important to consider boundary heterogeneity when extrapolating numerical results to planetary conditions.

2015 ◽  
Vol 784 ◽  
Author(s):  
Michael A. Calkins ◽  
Kevin Hale ◽  
Keith Julien ◽  
David Nieves ◽  
Derek Driggs ◽  
...  

The influence of fixed temperature and fixed heat flux thermal boundary conditions on rapidly rotating convection in the plane layer geometry is investigated for the case of stress-free mechanical boundary conditions. It is shown that whereas the leading-order system satisfies fixed temperature boundary conditions implicitly, a double boundary layer structure is necessary to satisfy the fixed heat flux thermal boundary conditions. The boundary layers consist of a classical Ekman layer adjacent to the solid boundaries that adjust viscous stresses to zero, and a layer in thermal wind balance just outside the Ekman layers that adjusts the normal derivative of the temperature fluctuation to zero. The influence of these boundary layers on the interior geostrophically balanced convection is shown to be asymptotically weak, however. Upon defining a simple rescaling of the thermal variables, the leading-order reduced system of governing equations is therefore equivalent for both boundary conditions. These results imply that any horizontal thermal variation along the boundaries that varies on the scale of the convection has no leading-order influence on the interior convection, thus providing insight into geophysical and astrophysical flows where stress-free mechanical boundary conditions are often assumed.


2016 ◽  
Vol 20 (5) ◽  
pp. 1407-1420 ◽  
Author(s):  
Jaime Sieres ◽  
Antonio Campo ◽  
José Martínez-Súarez

This paper presents an analytical and numerical computation of laminar natural convection in a collection of vertical upright-angled triangular cavities filled with air. The vertical wall is heated with a uniform heat flux; the inclined wall is cooled with a uniform temperature; while the upper horizontal wall is assumed thermally insulated. The defining aperture angle ? is located at the lower vertex between the vertical and inclined walls. The finite element method is implemented to perform the computational analysis of the conservation equations for three aperture angles ? (= 15?, 30? and 45?) and height-based modified Rayleigh numbers ranging from a low Ra = 0 (pure conduction) to a high 109. Numerical results are reported for the velocity and temperature fields as well as the Nusselt numbers at the heated vertical wall. The numerical computations are also focused on the determination of the value of the maximum or critical temperature along the hot vertical wall and its dependence with the modified Rayleigh number and the aperture angle.


2019 ◽  
Vol 864 ◽  
pp. 519-553 ◽  
Author(s):  
Grace A. Cox ◽  
Christopher J. Davies ◽  
Philip W. Livermore ◽  
James Singleton

Motivated by the dynamics within terrestrial bodies, we consider a rotating, strongly thermally stratified fluid within a spherical shell subject to a prescribed laterally inhomogeneous heat-flux condition at the outer boundary. Using a numerical model, we explore a broad range of three key dimensionless numbers: a thermal stratification parameter (the relative size of boundary temperature gradients to imposed vertical temperature gradients), $10^{-3}\leqslant S\leqslant 10^{4}$, a buoyancy parameter (the strength of applied boundary heat-flux anomalies), $10^{-2}\leqslant B\leqslant 10^{6}$, and the Ekman number (ratio of viscous to Coriolis forces), $10^{-6}\leqslant E\leqslant 10^{-4}$. We find both steady and time-dependent solutions and delineate the regime boundaries. We focus on steady-state solutions, for which a clear transition is found between a low $S$ regime, in which buoyancy dominates the dynamics, and a high $S$ regime, in which stratification dominates. For the low-$S$ regime, we find that the characteristic flow speed scales as $B^{2/3}$, whereas for high-$S$, the radial and horizontal velocities scale respectively as $u_{r}\sim S^{-1}$, $u_{h}\sim S^{-3/4}B^{1/4}$ and are confined within a thin layer of depth $(SB)^{-1/4}$ at the outer edge of the domain. For the Earth, if lower mantle heterogeneous structure is due principally to chemical anomalies, we estimate that the core is in the high-$S$ regime and steady flows arising from strong outer boundary thermal anomalies cannot penetrate the stable layer. However, if the mantle heterogeneities are due to thermal anomalies and the heat-flux variation is large, the core will be in a low-$S$ regime in which the stable layer is likely penetrated by boundary-driven flows.


2014 ◽  
Vol 15 (8) ◽  
pp. 3212-3225 ◽  
Author(s):  
Hiroaki Matsui ◽  
Eric King ◽  
Bruce Buffett

Author(s):  
B. Straughan ◽  
F. Franchi

SynopsisCritical Rayleigh numbers are obtained for the onset of convection when the Maxwell–Cattaneo heat flux law is employed. It is found that convection is possible in both heated above and below cases.


2016 ◽  
Vol 250 ◽  
pp. 35-45 ◽  
Author(s):  
Swarandeep Sahoo ◽  
Binod Sreenivasan ◽  
Hagay Amit

2016 ◽  
Vol 46 (8) ◽  
pp. 2553-2569 ◽  
Author(s):  
Magnus Hieronymus ◽  
Jeffrey R. Carpenter

AbstractThe steady-state energy and thermal variance budgets form the basis for most current methods for evaluating turbulent fluxes of buoyancy, heat, and salinity. This study derives these budgets for a double-diffusive staircase and quantifies them using direct numerical simulations; 10 runs with different Rayleigh numbers are considered. The energy budget is found to be well approximated by a simple three-term balance, while the thermal variance budget consists of only two terms. The two budgets are also combined to give an expression for the ratio of the heat and salt fluxes. The heat flux scaling is also studied and found to agree well with earlier estimates based on laboratory experiments and numerical simulations at high Rayleigh numbers. At low Rayleigh numbers, however, the authors find large deviations from earlier scaling laws. Last, the scaling theory of Grossman and Lohse, which was developed for Rayleigh–Bénard convection and is based on the partitioning of the kinetic energy and tracer variance dissipation, is adapted to the diffusive regime of double-diffusive convection. The predicted heat flux scalings are compared to the results from the numerical simulations and earlier estimates.


Author(s):  
Stephen R. Kennon ◽  
George S. Dulikravich

A method is described for the inverse design of complex coolant flow passage shapes in internally cooled turbine blades. This method is a refinement and extension of a method developed by the authors for designing a single coolant hole in turbine blades. The new method allows the turbine designer to specify the number of holes the turbine blade is to have. In addition, the turbine designer may specify that certain portions of the interior coolant flow passage geometry are to remain fixed (eg. struts, surface coolant ejection channels, etc.). Like the original design method, the designer must specify the outer blade surface temperature and heat flux distribution and the desired interior coolant flow passage surface temperature distributions. This solution procedure involves satisfying the dual Dirichlet and Neumann specified boundary conditions of temperature and heat flux on the outer boundary of the airfoil while iteratively modifying the shapes of the coolant flow passages using a least squares optimization procedure that minimizes the error in satisfying the specified Dirichlet temperature boundary condition on the surface of each of the evolving interior holes. Portions of the inner geometry that are specified to be fixed are not modified. A first order panel method is used to solve Laplace’s equation for the steady heat conduction within the solid portions of the hollow blade, making the inverse design procedure very efficient and applicable to realistic geometries. Results are presented for a realistic turbine blade design problem.


Sign in / Sign up

Export Citation Format

Share Document