Viscous constraints on microorganism approach and interaction

2018 ◽  
Vol 851 ◽  
pp. 715-738 ◽  
Author(s):  
Mehdi Jabbarzadeh ◽  
Henry Chien Fu
Keyword(s):  
Reynolds Number ◽  
Near Field ◽  
Reynolds Numbers ◽  
Suspended Particles ◽  
The Other ◽  
Direct Approach ◽  
Low Reynolds Numbers ◽  
Physical Constraints ◽  
Low Reynolds ◽  
Viscous Hydrodynamics

Microorganisms must approach other suspended organisms or particles in order to interact with them during a host of life processes including feeding and mating. Microorganisms live at low Reynolds number where viscosity dominates and strongly affects the hydrodynamics of swimmer and nearby cells and objects. Viscous hydrodynamics makes it difficult for two surfaces to approach closely at low Reynolds numbers. Nonetheless, it is observed that microorganisms in fluid are still able to approach closely enough to interact with each other or suspended particles. Here, we study how the physical constraints provided by viscous hydrodynamics affects the feasibility of direct approach of flagellated and ciliated microorganisms to targets of different sizes. We find that it is feasible for singly flagellated swimmers to approach targets that are the same size or bigger. On the other hand, for squirmers, the feasibility of approach depends on near-field flows that can be controlled by the details of their swimming strokes.

Low Reynolds number flow around and heat transfer from a heated circular cylinder

2010 ◽  
Vol 1 (1-2) ◽  
pp. 15-20 ◽  
Author(s):  
B. Bolló
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Lift Coefficient ◽  
Reynolds Numbers ◽  
Low Reynolds Numbers ◽  
Reynolds Number Flow ◽  
Two Dimensional Flow ◽  
Number Flow ◽  
Low Reynolds ◽  
Increasing Temperature

Abstract The two-dimensional flow around a stationary heated circular cylinder at low Reynolds numbers of 50 < Re < 210 is investigated numerically using the FLUENT commercial software package. The dimensionless vortex shedding frequency (St) reduces with increasing temperature at a given Reynolds number. The effective temperature concept was used and St-Re data were successfully transformed to the St-Reeff curve. Comparisons include root-mean-square values of the lift coefficient and Nusselt number. The results agree well with available data in the literature.

Occurrence of Bubbles in a Thin Wire at Low Reynolds Number

1992 ◽  
Vol 114 (2) ◽  
pp. 255-260 ◽  
Author(s):  
K. Sato
Keyword(s):  
Separation Zone ◽  
Reynolds Numbers ◽  
Cavitation Number ◽  
The Other ◽  
Laminar Separation ◽  
Low Reynolds Numbers ◽  
Thin Wires ◽  
Different Types ◽  
Low Reynolds ◽  
Air Diffusion

Thin wires of various diameters from 0.07 to 0.7 mm are examined about appearances and characteristics of bubble occurrence behind them in the range of low Reynolds numbers. The appearance of bubbles is very dependent on diameters of wires. Two different types of bubbles can be observed in the present experiment. One is a streamer-type bubble for smaller wires and the other is a small unspherical bubble for larger wires. The incipient and the desinent values of cavitation number also change greatly with the bubble types. The streamer-type bubble is related to the presence of laminar separation zone and the growth due to air diffusion. The small unspherical bubble can be mainly attributed to the motion of rolled-up vortices and the growth due to vaporization.

A Computational Study on Airfoils at a Low Reynolds Number

2000 ◽  
Author(s):  
Ajit Pal Singh ◽  
S. H. Winoto ◽  
D. A. Shah ◽  
K. G. Lim ◽  
Robert E. K. Goh
Keyword(s):  
Reynolds Number ◽  
Computational Analysis ◽  
Computational Study ◽  
Low Reynolds Number ◽  
Micro Air Vehicles ◽  
Reynolds Numbers ◽  
Aerodynamic Performance ◽  
Low Reynolds Numbers ◽  
Study Results ◽  
Low Reynolds

Abstract Performance characteristics of some low Reynolds number airfoils for the use in micro air vehicles (MAVs) are computationally studied using XFOIL at a Reynolds number of 80,000. XFOIL, which is based on linear-vorticity stream function panel method coupled with a viscous integral formulation, is used for the analysis. In the first part of the study, results obtained from the XFOIL have been compared with available experimental data at low Reynolds numbers. XFOIL is then used to study relative aerodynamic performance of nine different airfoils. The computational analysis has shown that the S1223 airfoil has a relatively better performance than other airfoils considered for the analysis.

Experimental characterization of three-dimensional corner flows at low Reynolds numbers

2012 ◽  
Vol 707 ◽  
pp. 37-52 ◽  
Author(s):  
J. Sznitman ◽  
L. Guglielmini ◽  
D. Clifton ◽  
D. Scobee ◽  
H. A. Stone ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Secondary Flows ◽  
Channel Cross Section ◽  
Experimental Characterization ◽  
Low Reynolds Numbers ◽  
Low Reynolds

AbstractWe investigate experimentally the characteristics of the flow field that develops at low Reynolds numbers ($\mathit{Re}\ll 1$) around a sharp $9{0}^{\ensuremath{\circ} } $ corner bounded by channel walls. Two-dimensional planar velocity fields are obtained using particle image velocimetry (PIV) conducted in a towing tank filled with a silicone oil of high viscosity. We find that, in the vicinity of the corner, the steady-state flow patterns bear the signature of a three-dimensional secondary flow, characterized by counter-rotating pairs of streamwise vortical structures and identified by the presence of non-vanishing transverse velocities (${u}_{z} $). These results are compared to numerical solutions of the incompressible flow as well as to predictions obtained, for a similar geometry, from an asymptotic expansion solution (Guglielmini et al., J. Fluid Mech., vol. 668, 2011, pp. 33–57). Furthermore, we discuss the influence of both Reynolds number and aspect ratio of the channel cross-section on the resulting secondary flows. This work represents, to the best of our knowledge, the first experimental characterization of the three-dimensional flow features arising in a pressure-driven flow near a corner at low Reynolds number.

Low Reynolds-Number Experiments in an Axial-Flow Turbomachine

1964 ◽  
Vol 86 (3) ◽  
pp. 257-295 ◽  
Author(s):  
J. Neustein
Keyword(s):  
Reynolds Number ◽  
Guide Vane ◽  
Axial Flow ◽  
Reynolds Numbers ◽  
Low Flow ◽  
Working Fluid ◽  
Low Reynolds Numbers ◽  
Blade Row ◽  
Overall Performance ◽  
Low Reynolds

The performance of a single-stage, axial-flow turbomachine was studied experimentally at low Reynolds numbers. The study was made with a turbomachine modeled from a large jet-engine type of axial-flow compressor. Low Reynolds numbers were obtained by using a mixture of glycerine and water as the working fluid. The overall performance was determined over a range of Reynolds numbers RT (based on rotor-tip speed and rotor chord) from 2000 to 150,000. The flow rate at each Reynolds number was varied from near shutoff to the maximum permitted by the turbomachine-tunnel systems. Blade-row characteristics were studied by means of quantitative flow surveys before and after each blade row, and by means of extensive flow-visualization experiments within each blade row. The investigation established that sudden or critical changes in performance do not occur in the type of machine tested, between RT of 150,000 and 20,000. Below 20,000 the performance deteriorated more rapidly. A relatively sharp change in performance occurred between RT of 20,000 and 10,000. The results clarified many of the viscous flow details in each blade row which are associated with the deterioration of performance. These effects were very pronounced at RT of 4000 and below. Consequently, a considerable part of the paper is concerned with results obtained at these lower Reynolds numbers. From the point of view of a designer, information is presented in regard to overall performance, guide-vane turning, and guide-vane and stator total-pressure losses, all as functions of Reynolds number. These results are expected to be indicative of performance in turbomachines similar to the one tested here. Other details are concerned with problems such as wall boundary layers, flow reversal at low flow coefficients, lip-clearance flow, flow patterns near shutoff, and flow comparisons in stators with rotating and stationary hubs.

On High-Performance Airfoil at Very Low Reynolds Number

2016 ◽  
Vol 28 (3) ◽  
pp. 273-285
Author(s):  
Katsuya Hirata ◽  
◽  
Ryo Nozawa ◽  
Shogo Kondo ◽  
Kazuki Onishi ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Flat Plate ◽  
High Performance ◽  
Low Reynolds Number ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Aerodynamic Characteristics ◽  
Slow Flow ◽  
Low Reynolds Numbers ◽  
Low Reynolds

[abstFig src='/00280003/02.jpg' width=""300"" text='Iso-Q surfaces of very-slow flow past an iNACA0015' ] The airfoil is often used as the elemental device for flying/swimming robots, determining its basic performances. However, most of the aerodynamic characteristics of the airfoil have been investigated at Reynolds numbers Re’s more than 106. On the other hand, our knowledge is not enough in low Reynolds-number ranges, in spite of the recent miniaturisation of robots. In the present study, referring to our previous findings (Hirata et al., 2011), we numerically examine three kinds of high-performance airfoils proposed for very-low Reynolds numbers; namely, an iNACA0015 (the NACA0015 placed back to front), an FPBi (a flat plate blended with iNACA0015 as its upper half) and an FPBN (a flat plate blended with the NACA0015 as its upper half), in comparison with such basic airfoils as a NACA0015 and an FP (a flat plate), at a Reynolds number Re = 1.0 × 102 using two- and three-dimensional computations. As a result, the FPBi shows the best performance among the five kinds of airfoils.

Admissible Reynolds numbers for Poiseuille flow in jet viscometer orifices

1975 ◽  
Vol 347 (1648) ◽  
pp. 47-60 ◽  
Keyword(s):  
Reynolds Number ◽  
Shear Viscosity ◽  
Reynolds Numbers ◽  
Viscosity Reduction ◽  
Fully Developed Flow ◽  
Low Reynolds Numbers ◽  
Constant Diameter ◽  
Low Reynolds ◽  
Low Rate ◽  
Poiseuille Equation

At low Reynolds numbers for which the flow through a jet viscometer orifice strictly obeys the Poiseuille equation, the effective hydrodynamic length L 0 which may be calculated from the volume flow rate, the applied pressure difference, the radius of the orifice, and the density and low rate of shear viscosity of the liquid is much larger than the length L of ‘constant diameter’ of the orifice. It was shown before that a close approach, say 95%, to fully developed flow in the ‘constant diameter’ section of these short orifices is possible at sufficiently low Reynolds numbers, but it is shown now that L 0 may be used to calculate the largest admissible Reynolds number for 95% approach to fully developed flow. The flow in jet visco-meter orifices may be described by the Poiseuille–Hagenbach equation. At very low Reynolds numbers there is strict Poiseuille flow. This is followed by a short range of Reynolds numbers in which the inertia force correction factor m ( see equation (1)) increases steeply with the Reynolds number to reach a plateau value at a diameter Reynolds number of about 20. Although L 0 is not constant over the whole range of admissible Reynolds numbers, it satisfies the Poiseuille-Hagenbach equation if it is used with the appropriate m -value for each orifice and flow condition. For quantitative measurements of the temporary viscosity reduction of a liquid by an applied shear stress, care must be taken to avoid the transition region in which m varies with Re , because the Reynolds number Re can only be calculated with the low rate of shear viscosity of the liquid. It is important to find the mean rate of shear for any particular temporary viscosity reduction. Within the admissible range of Reynolds numbers, this may be derived from the Poiseuille equation. It is shown that the temporary viscosity reduction curve of one liquid which was measured with three jet orifices of different m-Re characteristics was a unique curve.

Low Reynolds number heat transfer from a circular cylinder

1968 ◽  
Vol 32 (1) ◽  
pp. 21-28 ◽  
Author(s):  
C. A. Hieber ◽  
B. Gebhart
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Number Theory ◽  
Circular Cylinder ◽  
Prandtl Number ◽  
Experimental Work ◽  
Reynolds Numbers ◽  
Low Reynolds Numbers ◽  
Low Reynolds ◽  
Theoretical Results

Theoretical results are obtained for forced heat convection from a circular cylinder at low Reynolds numbers. Consideration is given to the cases of a moderate and a large Prandtl number, the analysis in each case being based upon the method of matched asymptotic expansions. Comparison between the moderate Prandtl number theory and known experimental results indicates excellent agreement; no relevant experimental work has been found for comparison with the large Prandtl number theory.

Novel Low Reynolds Number Mixers for Microfluidic Applications

2003 ◽  
Author(s):  
S. P. Vanka ◽  
C. M. Winkler ◽  
J. Coffman ◽  
E. Linderman ◽  
S. Mahjub ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Rhodamine 6G ◽  
Rectangular Cross Section ◽  
Reynolds Numbers ◽  
Secondary Flows ◽  
Low Reynolds Numbers ◽  
Sucrose Solutions ◽  
Low Reynolds ◽  
Rhodamine 6G Dye ◽  
Microfabrication Techniques

We present two new designs of compact mixers that can provide good mixing at low Reynolds numbers encountered in many microfluidic devices. The new designs benefit from curvature induced cross-stream vortices to enhance mixing of two co-flowing streams of fluids arranged side by side. One of the designs is a spiral of rectangular cross-section, while the other is a series of concentric circular channels arranged as a labyrinth. Both utilize the formation of sustained secondary flows to enhance mixing between two streams. Currently, the devices are fabricated in aluminum using standard machining techniques. However, they can be reduced further in size using standard microfabrication techniques. Mixing experiments were conducted in these channels at a Reynolds number of 6.8 using two sucrose solutions, one of which was laced with Rhodamine 6G dye. Compared to a experiment in an equivalent straight channel, a significant enhancement in the mixing of the two streams, as indicated by the intensity of the second fluid’s color, was observed. The present designs provide a compact and easy-to-fabricate alternative to various other concepts proposed in literature.

scholarly journals Investigation of Riblet Geometry and Start Locations of Herringbone Riblets on Pressure Losses in a Linear Cascade at Low Reynolds Numbers

2020 ◽  
Vol 142 (10) ◽  
Author(s):  
Qiang Liu ◽  
Shan Zhong ◽  
Lin Li
Keyword(s):  
Reynolds Number ◽  
Reynolds Numbers ◽  
Effective Control ◽  
Slight Reduction ◽  
Turning Angle ◽  
Low Reynolds Numbers ◽  
Pressure Losses ◽  
Lower Reynolds Number ◽  
Displacement Thickness ◽  
Low Reynolds

Abstract In this paper, the effects of an array of herringbone riblets with different riblet geometry (height and spacing) and start locations on the pressure losses in a cascade of diffuser blades are investigated over a range of low Reynolds numbers (0.50 × 105–1.00 × 105). The herringbone riblets with a given geometry are found to produce a profound modification to the wake structure above certain critical Reynolds numbers. It is also found that within the range of parameters tested an increase in riblet height and riblet spacing results in an onset of significant control effect at a lower Reynolds number, which is accompanied by a slight reduction in zone-averaged loss coefficient and flow turning angle. An upstream shift of the start position of the riblet array along the blades enables the riblets to become effective at a lower Reynolds number at the expense of a reduced loss reduction and flow turning angle. A semi-empirical relationship between the ratio of riblet height to local baseline boundary layer displacement thickness and the critical Reynolds number is established using the present experimental data. A preliminary methodology for designing the herringbone riblets to ensure an effective control of 2D flow separations around the mid-span of diffuser blades over a specified range of Reynolds numbers is also proposed.

Sign in / Sign up

Export Citation Format

Share Document