Fractures in continental shale reservoirs: a case study of the Upper Triassic strata in the SE Ordos Basin, Central China

2015 ◽  
Vol 153 (4) ◽  
pp. 663-680 ◽  
Author(s):  
WENLONG DING ◽  
PENG DAI ◽  
DINGWEI ZHU ◽  
YEQIAN ZHANG ◽  
JIANHUA HE ◽  
...  
Keyword(s):  
Organic Matter ◽  
Shale Gas ◽  
Mineral Content ◽  
Ordos Basin ◽  
Total Content ◽  
Upper Triassic ◽  
Thin Sections ◽  
Yanchang Formation ◽  
Fracture Development ◽  
Shale Reservoirs

AbstractFractures are important for shale-gas reservoirs with low matrix porosity because they increase the effective reservoir space and migration pathways for shale gas, thus favouring an increased volume of free gas and the adsorption of gases in shale reservoirs, and they increase the specific surface area of gas-bearing shales which improves the adsorption capacity. We discuss the characteristics and dominant factors of fracture development in a continental organic matter-rich shale reservoir bed in the Yanchang Formation based on observations and descriptions of fracture systems in outcrops, drilling cores, cast-thin sections and polished sections of black shale from the Upper Triassic Yanchang Formation in the SE Ordos Basin; detailed characteristics and parameters of fractures; analyses and tests of corresponding fracture segment samples; and the identification of fracture segments with normal logging. The results indicate that the mineral composition of the continental organic-matter-rich shale in the Yanchang Formation is clearly characterized by a low brittle mineral content and high clay mineral content relative to marine shale in the United States and China and Mesozoic continental shale in other basins. The total content of brittle minerals, such as quartz and feldspar, is c. 41%, with quartz and feldspar accounting for 22% and 19% respectively, and mainly occurring as plagioclase with small amounts of carbonate rocks. The total content of clay minerals is high at up to 52%, and mainly occurs as a mixed layer of illite-smectite (I/S) which accounts for more than 58% of the total clay mineral content. The Upper Triassic Yanchang Formation developed two groups of fracture (joint) systems: a NW–SE-trending system and near-E–W-trending system. Multiple types of fractures are observed, and they are mainly horizontal bedding seams and low-dip-angle structural fractures. Micro-fractures are primarily observed in or along organic matter bands. Shale fractures were mainly formed during Late Jurassic – late Early Cretaceous time under superimposed stress caused by regional WNW–ESE-trending horizontal compressive stress and deep burial effects. The extent of fracture development was mainly influenced by multiple factors (tectonic factors and non-tectonic factors) such as the lithology, rock mechanical properties, organic matter abundance and brittle mineral composition and content. Specifically, higher sand content has been observed to correspond to more rapid lithological changes and more extensive fracture development. In addition, higher organic matter content has been observed to correspond to greater fracture development, and higher quartz, feldspar and mixed-layer I/S contents have been observed to correspond to more extensive micro-fracture development. These results are consistent with the measured mechanical properties of the shale and silty shale, the observations of fractures in cores and thin-sections from more than 20 shale-gas drilling wells, and the registered anomalies from gas logging.

Characteristics of Chang 7 shale gas in the Triassic Yanchang Formation, Ordos Basin, China

2017 ◽  
Vol 5 (2) ◽  
pp. SF31-SF39 ◽  
Author(s):  
Xiangzeng Wang
Keyword(s):  
Organic Matter ◽  
Clay Mineral ◽  
Shale Gas ◽  
Mineral Content ◽  
Ordos Basin ◽  
Central China ◽  
Late Triassic ◽  
Yanchang Formation ◽  
Geochemical Parameters ◽  
Porosity And Permeability

The Yanchang Formation in the Ordos Basin in North Central China represents a large, long-lived lacustrine system of the late Triassic Period. The extensive shales within this system provide hydrocarbons (HCs) for conventional and unconventional oil and gas reservoirs. In the formation, the Chang 7 shale is the thickest shale with the best geochemical parameters, and it is the main source rock in this area. In recent years, the discovery of shale gas in the Chang 7 shale has promoted the exploration and development of lacustrine shale gas in China. We have estimated the shale gas resource potential based on the analysis of the geologic conditions of the Chang 7 shale. The average thickness of the Chang 7 shale reaches 42.6 m, and the main organic matter types are types [Formula: see text] and [Formula: see text]. The average content of organic carbon is more than 3%, and the average HC potential is [Formula: see text]. However, the thermal maturity of the Chang 7 shale is low with a vitrinite reflectance [Formula: see text] ranging from 0.83% to 1.10%. The Chang 7 shale lithology consists of shale and sandy laminations or thin sandstones. The shale is characterized by high clay mineral content and poor porosity and permeability, with an average porosity of 1.8% and an average permeability of [Formula: see text]. The sandy laminations or thin sandstones are characterized by relatively higher brittle mineral content, relatively lower clay mineral content, and higher porosity and permeability. The pores of the Chang 7 shale include primary intergranular and intragranular pores, secondary intragranular and intragranular dissolved pores, fracture pores, and organic-matter-hosted pores. The proportion of adsorbed gas, free gas, and dissolved gas is approximately 52%, 37%, and 11%, respectively, and the shale gas resources of the Chang 7 shale are [Formula: see text].

scholarly journals Shale Gas Content Calculation of the Triassic Yanchang Formation in the Southeastern Ordos Basin, China

2017 ◽  
Author(s):  
Jiao Su ◽  
Yingchu Shen ◽  
Bo Liu ◽  
Jin Hao
Keyword(s):  
Shale Gas ◽  
Calculation Method ◽  
Indirect Method ◽  
Ordos Basin ◽  
Gas Content ◽  
Dissolved Gas ◽  
Yanchang Formation ◽  
Free Gas ◽  
Shale Reservoirs ◽  
Method Show

Shale gas content is the key parameter for shale gas potential evaluation and favorable area prediction. Therefore, it is very important to determine shale gas content accurately. Generally, we use the USBM method for coal reservoirs to calculate gas content of shale reservoirs. However, shale reservoirs are different from coal reservoirs in depth, pressure, core collection, etc. This method would inevitably cause problems. In order to make the USBM method more suitable for shale reservoir, an improved USBM method is put forward on the basis of systematic analysis of core pressure history and temperature history during shale gas desorption. The improved USBM method modifies the calculation method of the lost time, and determines the temperature balance time of water heating. In addition, we give the calculation method of adsorption gas content and free gas content, especially the new method of calculating the oil dissolved gas content and water dissolved gas content which are easily neglected. We used the direct method (USBM and the improved USBM) and the indirect method (adsorption gas, free gas and dissolved gas) to calculate the shale gas content of 16 shale samples of the Triassic Yanchang Formation in the Southeastern Ordos Basin, China. The results of the improved USBM method show that the total shale gas content is high, with an average of 3.97 m3/t, and the lost shale gas content is the largest proportion with an average of 62%. The total shale gas content calculated by the improved USBM method is greater than that of the USBM method. The results of the indirect method show that the total shale gas content is large, with an average of 4.11 m3/t, and the adsorption shale gas content is the largest proportion with an average of 71%.  The oil dissolved shale gas content which should be taken attention accounts for about 7.8%. The relative error between the improved USBM method and indirect method is much smaller than that between USBM method and indirect method, which verifies the accuracy of the improved USBM method.

scholarly journals Investigation into the Pore Structure and Multifractal Characteristics of Shale Reservoirs through N2 Adsorption: An Application in the Triassic Yanchang Formation, Ordos Basin, China

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Zhikai Liang ◽  
Zhenxue Jiang ◽  
Zhuo Li ◽  
Fenglin Gao ◽  
Xiaoqing Liu
Keyword(s):  
Organic Matter ◽  
Pore Structure ◽  
Mineral Content ◽  
Gas Adsorption ◽  
Ordos Basin ◽  
Total Pore Volume ◽  
Silty Mudstone ◽  
Nitrogen Gas ◽  
Rock Composition ◽  
Yanchang Formation

To understand the pore structure and heterogeneity of pore size distribution (PSD) is essential for revealing fluid mechanics and evaluating the utilization of unconventional resources. In this study, there are multiple shale examples collected from the Chang 7 section in the Ordos Basin for the investigation was conducted on the basis of various experiments on total organic carbon (TOC), X-ray diffraction (XRD), and nitrogen gas adsorption, through scanning electron microscopy (SEM) and multifractal method. The multifractal characteristic parameters, including the width of singularity spectra ( Δ α ), Hurst exponent ( H ), D 1 / D 0 , and nitrogen gas adsorption, were used to find out about the characteristics of pore development and to quantify the complexity and heterogeneity of pore structure. Depending on the exact mineral composition, the Yanchang Formation of Chang 7 shales is classified into either silty mudstone (SM) or muddy siltstone lithofacies (MS). According to the investigative results, the Chang 7 lacustrine shale features a complex pore system with the pores ranging from 1.5 to 10 nm in diameter. Besides, mesopores contribute significantly to the total pore volume (TPV) and total surface area (TSA). As for TPV and TSA of the SM lithofacies in the samples under investigation, they are nearly 1.09–1.78 and 0.80–1.72 times greater as compared to the MS lithofacies samples. The dominant types of reservoir spaces include organic matter (OM) pore and interparticle pore which are related to inorganic minerals. The value of Δ α is higher for MS lithofacies than for SM lithofacies, indicating a greater heterogeneity of PSD in the MS lithofacies. The pore structure of MS lithofacies is determined mainly by TOC and siliceous mineral content, whereas the influencing factors for SM lithofacies are TOC and clay mineral content. There is a significant relationship between multifractal parameters and pore structure parameters for both SM and MS lithofacies. The TOC of SM and MS lithofacies exhibits a close correlation with Δ α , suggesting that the pores in organic matter are dominated by those nanopores with a complex and heterogeneous pore structure. The rock composition of the lithofacies can affect Δ α to a varying extent, which means that the minerals have an evident impact on the heterogeneity of MS and SM lithofacies.

Sign in / Sign up

Export Citation Format

Share Document