Mid-Cretaceous marine Os isotope evidence for heterogeneous cause of oceanic anoxic events

During the mid-Cretaceous, the Earth experienced several environmental perturbations, including an extremely warm climate and Oceanic Anoxic Events (OAEs). Submarine volcanic episodes associated with formation of large igneous provinces (LIPs) may have triggered these perturbations. The osmium isotopic ratio (187Os/188Os) is a suitable proxy for tracing hydrothermal activity associated with the LIPs formation, but 187Os/188Os data from the mid-Cretaceous are limited to short time intervals. Here we provide a continuous high-resolution marine 187Os/188Os record covering all mid-Cretaceous OAEs. Several OAEs (OAE1a, Wezel and Fallot events, and OAE2) correspond to unradiogenic 187Os/188Os shifts, suggesting that they were triggered by massive submarine volcanic episodes. However, minor OAEs (OAE1c and OAE1d), which do not show pronounced unradiogenic 187Os/188Os shifts, were likely caused by enhanced monsoonal activity. Because the subaerial LIPs volcanic episodes and Circum-Pacific volcanism correspond to the highest temperature and pCO2 during the mid-Cretaceous, they may have caused the hot mid-Cretaceous climate.

Mineralogical and geochemical characterisation of the Kipawa syenite complex, Quebec: implications for rare-earth element deposits

The Kipawa rare-earth element (REE) deposit is located in the Parautochton zone of the Grenville Province 55 km south of the boundary with the Superior Province. The deposit is part of the Kipawa syenite complex of peralkaline syenites, gneisses, and amphibolites that are intercalated with calc-silicate rocks and marbles overlain by a peralkaline gneissic granite. The REE deposit is principally composed of eudialyte, mosandrite and britholite, and less abundant minerals such as xenotime, monazite or euxenite. The Kipawa Complex outcrops as a series of thin, folded sheet imbricates located between regional metasediments, suggesting a regional tectonic control. Several hypotheses for the origin of the complex have been suggested: crustal contamination of mantle-derived magmas, crustal melting, fluid alteration, metamorphism, and hydrothermal activity. Our objective is to characterize the mineralogical, geochemical, and isotopic composition of the Kipawa complex in order to improve our understanding of the formation and the post-formation processes, and the age of the complex. The complex has been deformed and metamorphosed with evidence of melting-recrystallization textures among REE and Zr rich magmatic and post magmatic minerals. Major and trace element geochemistry obtained by ICP-MS suggest that syenites, granites and monzonite of the complex have within-plate A2 type anorogenic signatures, and our analyses indicate a strong crustal signature based on TIMS whole rock Nd isotopes. We have analyzed zircon grains by SEM, EPMA, ICP-MS and MC-ICP-MS coupled with laser ablation (Lu-Hf). Initial isotopic results also support a strong crustal signature. Taken together, these results suggest that alkaline magmas of the Kipawa complex/deposit could have formed by partial melting of the mantle followed by strong crustal contamination or by melting of metasomatized continental crust. These processes and origins strongly differ compare to most alkaline complexes in the world. Additional TIMS and LA-MC-ICP-MS analyses are planned to investigate whether all lithologies share the same strong crustal signature.

Hydrothermal Alteration and Its Superimposed Enrichment for Qianjiadian Tabular-Type Uranium Deposit in Southwestern Songliao Basin

The evolution characteristics of hydrothermal activity and superimposed uranium mineralization in the Qianjiadian ore field in southwestern Songliao Basin are still controversial and lack direct evidence. In this comprehensive study, a detailed identification of dolerite and hydrothermally altered un-mineralized sandstone and sandstone-hosted ore in the Yaojia Formation have been performed through the use of scanning electron microscopy observation, electron probe, carbon-oxygen-sulfur isotope, and fluid inclusion analyses. The results show that the hydrothermal fluid derived from the intermediate-basic magma intrusion is a low-temperature reducing alkaline fluid and rich in CO2, Si, Zr, Ti, Fe, Mg, Mn, and Ca, producing different types of altered mineral assemblages in the rocks, including carbonation, pyritization, sphalerite mineralization, clausthalite mineralization, silicification, and biotitization. Specifically, the carbonate minerals in sandstone are mixed products of deep hydrothermal fluid and meteoric water, with carbon and oxygen isotopes ranging from −5.2‰ to −1.7‰ and −20.4‰ to −11.1‰, respectively. Carbon source of the carbonate minerals in dolerite is mainly inorganic carbon produced at the late stage of intermediate-basic magma evolution, with carbon and oxygen isotopes from −16.1‰ to −7.2‰ and −18.2‰ to −14.5‰, respectively. Various carbonate minerals in the rocks may have been precipitated by the hydrothermal fluid after the magmatic stage, due to the change of its CO2 fugacity, temperature, and cation concentration during the long-term evolution stage. A series of carbonate minerals were generated as calcite, dolomite, ankerite, ferromanganese dolomite, and dawsonite. The precipitation processes and different types of carbonate mineral mixtures identified in this study mainly occur as parallel, gradual transition, interlacing, or inclusion metasomatism in the same vein body, without obvious mineralogical and petrologic characteristics of penetrating relationship. Homogenization temperature of fluid inclusions in calcite is high, in the range of 203–234 °C, with a low salinity of 0.71–4.34% NaCl, and the data range is relatively concentrated. Homogenization temperature of fluid inclusions in ankerite is usually low, ranging from 100 °C to 232 °C, with a high salinity of 4.18–9.98% NaCl. The precipitation processes of carbonate minerals and the results of this study are basically in consistent. Overall, the sandstone-type uranium deposits have a temporal and genetic relationship with hydrothermal activities during Paleogene. (1) Hydrothermal activity was directly involved in uranium mineralization, result in dissolution and reprecipitation of earlier uranium minerals, forming uranium-bearing ankerite and complexes containing uranium, zirconium, silicon, and titanium. (2) Hydrothermal fluid activity provided reducing agent to promote hydrocarbon generation from pyrolysis of carbonaceous fragments and accelerate uranium precipitation rate. (3) Regional water stagnation prolongs reaction time, contributing to huge uranium enrichment. This study provides new petrologic, mineralogical, and geochemical evidence for multi-fluid coupled and superimposed mineralization of sandstone-hosted uranium deposits in the sedimentary basin.

Disseminating the knowledge on the complex interactions between humans and volcanoes: the geological section of the Villa Arbusto archaeological museum at Lacco Ameno (Ischia, Naples - Italy)

A room in the Archaeological Museum of Villa Arbusto (Lacco Ameno, Ischia) was set up to house rocks and fossils collected by the renowned archaeologist Giorgio Buchner during his excavation activity on the Island of Ischia. The collection is witness to a long multidisciplinary research activity that saw archaeological studies at the center of volcanological, pedological and palaeoenvironmental researches, aimed at reconstructing the archaeological contexts in the complex geological dynamics of the island. In fact, during the different phases of colonization recorded on the island, the Ischia volcanoes were very active and produced explosive and effusive eruptions, accompanied by a strong geological dynamics that included earthquakes, landslides (even gigantic ones), rapid ground uplift and strong hydrothermal activity. In the room, the samples on display “tell” the evolution of the island and its dynamics in four windows and a chest of drawers, where there is an exposition of the products of the various eruptions, from the oldest to the most recent, sedimentary rocks and the collection of macro and microfossils found in marine sediments, displaced at variable altitudes by the rapid volcano-tectonic deformations that characterize the island. A series of panels and monitors accompany the visitor along a path that, starting from the geological evolution of the island, passes through the relationship between humans and the volcano, the main volcanic phenomena and the reconstruction of an archaeological excavation of exceptional value, where it is possible to see the strong interaction between primary and secondary volcanic phenomena and a human settlement of the first Greek colony in the west: Pithecusae. The exhibition was designed with the purpose of educating the visitors and the local population about the natural history of the island and its volcanoes, and their impact on the human life through time.

Detachment-parallel recharge explains high discharge fluxes at the TAG hydrothermal field

Submarine massive sulfide deposits on slow-spreading ridges are larger and longer-lived than deposits at fast-spreading ridges1,2, likely due to more pronounced tectonic faulting creating stable preferential fluid pathways3,4. The TAG hydrothermal mound at 26°N on the Mid-Atlantic Ridge (MAR) is a typical example located on the hanging wall of a detachment fault5-7. It has formed through distinct phases of high-temperature fluid discharge lasting 10s to 100s of years throughout at least the last 50,000 years8 and is one of the largest sulfide accumulations on the MAR. Yet, the mechanisms that control the episodic behavior, keep the fluid pathways intact, and sustain the observed high heat fluxes of up to 1800 MW9 remain poorly understood. Previous concepts involved long-distance channelized high-temperature fluid upflow along the detachment5,10 but that circulation mode is thermodynamically unfavorable11 and incompatible with TAG's high discharge fluxes. Here, based on the joint interpretation of hydrothermal flow observations and 3-D flow modeling, we show that the TAG system can be explained by episodic magmatic intrusions into the footwall of a highly permeable detachment surface. These intrusions drive episodes of hydrothermal activity with sub-vertical discharge and recharge along the detachment. This revised flow regime reconciles problematic aspects of previously inferred circulation patterns and can be used as guidance to one critical combination of parameters that can generate substantive mineral systems.

Trace Element and Isotope Systematics in Vent Fluids and Sulphides From Maka Volcano, North Eastern Lau Spreading Centre: Insights Into Three-Component Fluid Mixing

Back-arc spreading centres and related volcanic structures are known for their intense hydrothermal activity. The axial volcanic edifice of Maka at the North Eastern Lau Spreading Centre is such an example, where fluids of distinct composition are emitted at the Maka hydrothermal field (HF) and at Maka South in 1,525–1,543 m water depth. At Maka HF black smoker-type fluids are actively discharged at temperatures of 329°C and are characterized by low pH values (2.79–3.03) and a depletion in Mg (5.5 mmol/kg) and SO4 (0.5 mmol/L) relative to seawater. High metal (e.g., Fe up to ∼6 mmol/kg) and rare Earth element (REE) contents in the fluids, are indicative for a rock-buffered hydrothermal system at low water/rock ratios (2–3). At Maka South, venting of white smoke with temperatures up to 301°C occurs at chimneys and flanges. Measured pH values range from 4.53 to 5.42 and Mg (31.0 mmol/kg), SO4 (8.2 mmol/L), Cl (309 mmol/kg), Br (0.50 mmol/kg) and Na (230 mmol/kg) are depleted compared to seawater, whereas metals like Li and Mn are typically enriched together with H2S. We propose a three-component mixing model with respect to the fluid composition at Maka South including seawater, a boiling-induced low-Cl vapour and a black smoker-type fluid similar to that of Maka HF, which is also preserved by the trace element signature of hydrothermal pyrite. At Maka South, high As/Co (>10–100) and Sb/Pb (>0.1) in pyrite are suggested to be related to a boiling-induced element fractionation between vapour (As, Sb) and liquid (Co, Pb). By contrast, lower As/Co (<100) and a tendency to higher Co/Ni values in pyrite from Maka HF likely reflect the black smoker-type fluid. The Se/Ge ratio in pyrite provides evidence for fluid-seawater mixing, where lower values (<10) are the result of a seawater contribution at the seafloor or during fluid upflow. Sulphur and Pb isotopes in hydrothermal sulphides indicate a common metal (loid) source at the two vent sites by host rock leaching in the reaction zone, as also reflected by the REE patterns in the vent fluids.

Accumulative landforms in valleys with gas-hydrothermal manifestations of the Kuril-Kamchatka region

Within the watercourse valleys of geothermal zones, where manifestations of gas-hydrothermal activity are noted, the processes of relief formation are accompanied by chemical and thermal effects. Thermal waters contribute to the formation of specific accumulative landforms both directly in the channel and in the bottom and on the sides of river valleys. Similar phenomena have been studied in river valleys draining the slopes of the Mendeleev volcano (Kunashir Island), Baransky volcano (Iturup Island), Mutnovsky volcano and Uzon-Geyzernaya caldera (Kamchatka). The typification of accumulative relief forms is carried out, the influence of gas-hydrothermal manifestations on fluvial and slope processes is determined.

Magmatic-Hydrothermal Processes of Vein-Type Haman-Gunbuk-Daejang Copper Deposits in the Gyeongnam Metallogenic Belt in South Korea

Haman, Gunbuk, and Daejang deposits are neighboring vein-type hydrothermal Cu deposits located in the SE part of the Korean Peninsula. These three deposits are formed by magmatic-hydrothermal activity associated with a series of Cretaceous granodioritic intrusions of the Jindong Granitoids, which have created a series of veins and alterations in a hornfelsed shale formation. The copper deposits have common veining and alteration features: 1) a pervasive chlorite-epidote alteration, cut by 2) Cu-Pb-Zn-bearing quartz veins with a tourmaline-biotite alteration, and 3) the latest barren calcite veins. Chalcopyrite, pyrite, and pyrrhotite are common ore minerals in the three deposits. Whereas magnetite is a dominant mineral in the Haman and Gunbuk deposits, no magnetite is present, but sphalerite and galena are abundant in the Daejang deposit. Ore-bearing quartz veins have three types of fluid inclusions: 1) liquid-rich, 2) vapor-rich, and 3) brine inclusions. Hydrothermal temperatures obtained from the brine inclusion assemblages are about 340–600, 250–500, and 320–460°C in the Haman, Gunbuk, and Daejang deposits, respectively. The maximum temperatures (from 460 to 600°C) recorded in the fluid inclusions of the three deposits are higher than those of the Cu ore precipitating temperature of typical porphyry-like deposits (from 300 to 400°C). Raman spectroscopy of vapor inclusions showed the presence of CO2 and CH4 in the three deposits, which indicates relatively reduced hydrothermal conditions as compared with typical porphyry deposits. The Rb/Sr ratios and Cs concentrations of brine inclusions suggest that the Daejang deposit was formed by a later and more fractionated magma than the Haman and Gunbuk deposits, and the Daejang deposit has lower Fe/Mn ratios in brine inclusions than the Haman and Gunbuk deposits, which indicates contrasting redox conditions in hydrothermal fluids possibly caused by an interaction with a hosting shale formation. In brines, concentrations of base metals do not change significantly with temperature, which suggests that significant ore mineralization precipitation is unlikely below current exposure levels, especially at the Haman deposit. Ore and alteration mineral petrography and fluid inclusions suggest that the Haman deposit was formed near the top of the deep intrusion center, whereas the Gunbuk deposit was formed at a shallower intrusion periphery. The Daejang deposit was formed later at a shallow depth by relatively fractionated magma.