Electron trapping and acceleration in plasma wake field produced by an evolving hollow electron beam

2021 ◽  
Vol 87 (1) ◽  
Author(s):  
Xiangyang Liu ◽  
Junfan Qu ◽  
Peng Liu ◽  
Houchen Fan ◽  
Ling Cai ◽  
...  

In this article, the electron trapping and acceleration in the wake field driven by an ultrarelativistic hollow electron beam is studied. When the hollow driver injects into plasma, there is a doughnut-shaped electron bubble formed because of the existence of a special ‘backflow’ beam in the centre of the electron bubble. At the same time, there is a transverse convergence of the hollow driver, which leads to the weakening of the backflow beam. This results in a local electron density transition at the rear of the bubble. During this process, there is an expansion of the longitudinal electron bubble size, and a bunch of background electrons is trapped by the wake field at the rear of the bubble. The tracks for the trapped electrons show that there are two sources: one is from the bubble sheath and the other is from the unique backflow beam. In the particle-in-cell simulation where the driving beam has initial energy of $1.0$ GeV per particle, the trapped beam can be accelerated to energy of more than $1.5$ GeV per particle and the corresponding transformer ratio is $1.5$ . With the increase of driving beam energy up to $40.0$ GeV, a transformer ratio of $1.4$ still can be achieved. By adjusting the hollow beam density, it is possible to control the trapped beam charge value and beam quality, such as its energy spread and transverse emittance.

2018 ◽  
Vol 84 (3) ◽  
Author(s):  
X. Davoine ◽  
F. Fiúza ◽  
R. A. Fonseca ◽  
W. B. Mori ◽  
L. O. Silva

In this paper, we determine the growth rate of the exponential radiation amplification in the ion-channel laser, where a relativistic electron beam wiggles in a focusing ion channel that can be created in a wakefield accelerator. For the first time the radiation diffraction, which can limit the amplification, is taken into account. The electron beam quality requirements to obtain this amplification are also presented. It is shown that both the beam energy and wiggler parameter spreads should be limited. Two-dimensional and three-dimensional particle-in-cell simulations of the self-consistent ion-channel laser confirm our theoretical predictions.


2022 ◽  
Author(s):  
Hao Jian-Hong ◽  
Xue Bi-Xi ◽  
Zhao Qiang ◽  
Zhang Fang ◽  
Fan Jie-Qing ◽  
...  

Abstract It is known that ion-focused regime can effectively suppress the expansion of relativistic electron beam (REB). By using particle in cell-Monte Carlo collision (PIC-MCC) method, the propagation of REBs in neutral gas is numerically investigated. The numerical results demonstrate that the beam body is charge neutralization and a stable IFR can be established. As a result, the beam transverse dimensions and longitudinal velocities keep close to the initial parameters. We also calculated the charge and current neutralization factors of REBs. Combined with envelope equations, we obtained the variations of beam envelopes, which agree well with the PIC simulations. However, both the energy loss and instabilities of REBs may lead to a low transport efficiency during long-range propagation. It has been proved that decreasing the initial pulse length of REBs can avoid the influence of electron avalanche. Using parts of REB pulses to build a long-distance IFR in advance can improve the beam quality of subsequent pulses. Further, a long-distance IFR may contribute to the implementation of long-range propagation of REBs in the space environment.


2019 ◽  
Vol 203 ◽  
pp. 04011 ◽  
Author(s):  
Ioannis Pagonakis ◽  
Stefano Alberti ◽  
Konstantinos Avramidis ◽  
Francois Legrand ◽  
Gerd Gantenbein ◽  
...  

The magnetron injection gun (MIG) is one of the most critical subcomponents in gyrotrons. The electron beam, which has the primary role on the gyrotron operation, is generated and configured at this part of the tube. The electron beam properties determine the excitation mode in the cavity, the power of the generated microwaves and the gyrotron efficiency. The operation of MIGs could be influenced by several factors such as trapped electrons, manufacturing tolerances, roughness of the emitter ring, emitter temperature inhomogeneity, electron beam neutralization effect, etc. The influence of many of these factors on the electron beam quality has been systematically investigated during the last years. Several novelties have been proposed in order to limit the influence of these factors on the gyrotron operation. In particular, new design criteria have been proposed for the suppression of electron trapping mechanisms, a new type of the emitter ring has been proposed to minimize the influence of the manufacturing tolerances and edge effects on the beam quality, alternative MIG design approaches have been proposed, etc. An overview of all these works will be presented here.


2019 ◽  
Vol 37 (01) ◽  
pp. 38-48
Author(s):  
B. Nayak ◽  
S. Krishnagopal

AbstractHigh-intensity electron linacs have severe space-charge effects that lead to the production of beam halo which degrade the beam quality. For a given charge per bunch, hollow beams have a weaker nonlinear space-charge force. In this paper, we have investigated the possibility of using hollow beam to control halo growth in linacs. We simulate the dynamics of such a beam in a 17 MeV radio frequency linac using ASTRA beam dynamics code and show that it experiences a smaller emittance growth as well as reduced beam halo. The results suggest that using a hollow beam, high charge per bunch could be propagated and accelerated in a radio frequency linac.


2008 ◽  
Vol 32 (10) ◽  
pp. 842-845
Author(s):  
Zhang Kai-Zhi ◽  
Zhang Huang ◽  
Long Ji-Dong ◽  
Yang Guo-Jun ◽  
He Xiao-Zhong ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document