An optimal trajectory planning method for path tracking of industrial robots

Robotica ◽  
2018 ◽  
Vol 37 (3) ◽  
pp. 502-520 ◽  
Author(s):  
Xianxi Luo ◽  
Shuhui Li ◽  
Shubo Liu ◽  
Guoquan Liu

SUMMARYThis paper presents an optimal trajectory planning method for industrial robots. The paper specially focuses on the applications of path tracking. The problem is to plan the trajectory with a specified geometric path, while allowing the position and orientation of the path to be arbitrarily selected within the specific ranges. The special contributions of the paper include (1) an optimal path tracking formulation focusing on the least time and energy consumption without violating the kinematic constraints, (2) a special mechanism to discretize a prescribed path integration for segment interpolation to fulfill the optimization requirements of a task with its constraints, (3) a novel genetic algorithm (GA) optimization approach that transforms a target path to be tracked as a curve with optimal translation and orientation with respect to the world Cartesian coordinate frame, (4) an integration of the interval analysis, piecewise planning and GA algorithm to overcome the challenges for solving the special trajectory planning and path tracking optimization problem. Simulation study shows that it is an insufficient condition to define a trajectory just based on the consideration that each point on the trajectory should be reachable. Simulation results also demonstrate that the optimal trajectory for a path tracking problem can be obtained effectively and efficiently using the proposed method. The proposed method has the properties of broad adaptability, high feasibility and capability to achieve global optimization.

Author(s):  
Zhijun Chen ◽  
Feng Gao

Current studies on time-optimal trajectory planning centers on cases with fixed base and only one end-effector. However, the free-floating body and the multiple legs of the legged robot make the current methods inapplicable. This paper proposes a time-optimal trajectory planning method for six-legged robots. The model of the optimization problem for six-legged robots is built by considering the base and the end-effectors separately. Both the actuator constraints and the gait cycle constraints are taken into account. A novel two-step optimization method is proposed to solve the optimization problem. The first step solves the time-optimal trajectory of the body and the second step solves the time-optimal trajectory of the swinging legs. Finally, the method is applied to a six-parallel-legged robot and validated by experiments on the prototype. The results show that the velocity of the optimized gait is improved by 17.8% in contrast to the non-optimized one.


2013 ◽  
Vol 470 ◽  
pp. 658-662
Author(s):  
Yong Pan Xu ◽  
Ying Hong

In order to improve the efficiency and reduce the vibration of Palletizing Robot, a new optimal trajectory planning algorithm is proposed. This algorithm is applied to the trajectory planning of Palletizing manipulators. The S-shape acceleration and deceleration curve is adopted to interpolate joint position sequences. Considering constraints of joint velocities, accelerations and jerks, the traveling time of the manipulator is minimized. The joint interpolation confined by deviation is used to approximate the straight path, and the deviation is decreased significantly by adding only small number of knots. Traveling time is solved by using quintic polynomial programming strategy between the knots, and then time-jerk optimal trajectories which satisfy constraints are planned. The results show that the method can avoid the problem of manipulator singular points and improve the palletize efficiency.


Sign in / Sign up

Export Citation Format

Share Document