scholarly journals Spatial associations of humus, nutrients and soils in mixed dipterocarp forest at Lambir, Sarawak, Malaysian Borneo

2006 ◽  
Vol 22 (5) ◽  
pp. 543-553 ◽  
Author(s):  
I. C. Baillie ◽  
P. S. Ashton ◽  
S. P. Chin ◽  
S. J. Davies ◽  
P. A. Palmiotto ◽  
...  

Discrete humus layers are common on podzols under temperate coniferous and tropical heath forests, and patchy layers also occur under some temperate broadleaved forests on non-podzolic soils. We used multiple data sets to test the reported association of humus with oligotrophic but non-podzolic soils under non-heath dipterocarp forest at Lambir, Sarawak. We examined the distribution, morphology and nutrient dynamics of necromass on soils derived from sandstone and shale. Concentrations of the main mineral nutrients were lower in fresh litter on the very oligotrophic sandstone soils than on shale. The rates of litterfall were similar, so that annual litterfall fluxes of all nutrients were lower on sandstone. The lower nutrient concentrations and fluxes in the litter on sandstone resulted in slower decomposition, longer residence times and larger standing crops of forest-floor necromass, with lower concentrations of nutrients. The necromass on sandstone sequestered significantly more N, K and Mg but less Ca and Mn than on shale, with no significant difference for P. The variations in necromass nutrient dynamics were associated with morphological differences. There were mats of densely rooted humus under the litter on sandstone, whereas litter lay directly over the mineral topsoil on shale. Spatial associations with soil nutrients were weak for necromass thickness, but clear for humus. The proportions of nutrients in the litterfall and necromass reflected the stoichiometric profiles of the soils. We attribute the differences in necromass nutrient dynamics and their association with soil reserve nutrients to lower rates of nutrient replenishment from the weathering of sandstone than from shale. Necromass characteristics are robust field indicators of multivariate edaphic differences in these and other tropical forests on Acrisols/Ultisols derived from Tertiary clastic sediments.

2021 ◽  
pp. 096973302110032
Author(s):  
Sastrawan Sastrawan ◽  
Jennifer Weller-Newton ◽  
Gabrielle Brand ◽  
Gulzar Malik

Background: In the ever-changing and complex healthcare environment, nurses encounter challenging situations that may involve a clash between their personal and professional values resulting in a profound impact on their practice. Nevertheless, there is a dearth of literature on how nurses develop their personal–professional values. Aim: The aim of this study was to understand how nurses develop their foundational values as the base for their value system. Research design: A constructivist grounded theory methodology was employed to collect multiple data sets, including face-to-face focus group and individual interviews, along with anecdote and reflective stories. Participants and research context: Fifty-four nurses working across various nursing settings in Indonesia were recruited to participate. Ethical considerations: Ethics approval was obtained from the Monash University Human Ethics Committee, project approval number 1553. Findings: Foundational values acquisition was achieved through family upbringing, professional nurse education and organisational/institutional values reinforcement. These values are framed through three reference points: religious lens, humanity perspective and professionalism. This framing results in a unique combination of personal–professional values that comprise nurses’ values system. Values are transferred to other nurses either in a formal or informal way as part of one’s professional responsibility and customary social interaction via telling and sharing in person or through social media. Discussion: Values and ethics are inherently interweaved during nursing practice. Ethical and moral values are part of professional training, but other values are often buried in a hidden curriculum, and attained and activated through interactions during nurses’ training. Conclusion: Developing a value system is a complex undertaking that involves basic social processes of attaining, enacting and socialising values. These processes encompass several intertwined entities such as the sources of values, the pool of foundational values, value perspectives and framings, initial value structures, and methods of value transference.


2014 ◽  
Vol 45 (5-6) ◽  
pp. 1325-1354 ◽  
Author(s):  
Emilia Paula Diaconescu ◽  
Philippe Gachon ◽  
John Scinocca ◽  
René Laprise

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Siyu Hou ◽  
Zhaoyang Guo ◽  
Chuangneng Cai ◽  
Xiaobo Jiao

Purpose The purpose of this study is to examine the influence of firm performance on corporate social responsibility (CSR) and its possible moderating effect. Despite the significance of CSR, there remains an extensive debate about how it is affected by firm performance. Design/methodology/approach The conceptual model is mainly built on goal-setting theory. Based on archival data from multiple data sets on 1,650 companies, collected from 2010 to 2017, the hypotheses are tested using the two-stage instrumental variable regression method. Findings There is an inverted U-shaped relationship between firm performance and CSR that first increases and then decreases. In addition, considering the boundary conditions, state ownership makes the inverted U-shaped curve steeper, while high executive wage concentration makes the inverted U-shaped curve flatter. Research limitations/implications This study harmonizes the traditional contradictory findings of the influence of firm performance on CSR, that is, it supports a positive, negative or neutral relationship between the two. Originality/value This research provides a necessary structure for the CSR literature. By delving deeply into the relationship between firm performance and CSR, it enables scholars to better address the critical management question of whether earning more will lead to doing good.


2011 ◽  
Vol 21 (5) ◽  
pp. 1461-1473 ◽  
Author(s):  
Chao Gao ◽  
Han Wang ◽  
Ensheng Weng ◽  
S. Lakshmivarahan ◽  
Yanfen Zhang ◽  
...  

2021 ◽  
Author(s):  
Alessandro Comunian ◽  
Mauro Giudici

<p>Indirect inversion approaches are widely used in Geosciences, and in particular also for the identification of the hydraulic properties of aquifers. Nevertheless, their application requires a substantial number of model evaluation (forward problem) runs, a task that for complex problems can be computationally intensive. Reducing this computational burden is an active research topic, and many solutions, including the use of hybrid optimization methods, the use of physical proxies or again machine-learning tools <span>allow to avoid</span> considering the full physics of the problem when running a numerical implementation of the forward problem.</p><p>Direct inversion approaches represent computationally frugal alternatives to indirect approaches, because in general they require a smaller number of runs of the forward problem. The classical drawbacks of these methods can be alleviated by some implementation approaches and in particular by using multiple sets of data, when available.</p><p>This work is an effort to improve the robustness of the Comparison Model Method (CMM), a direct inversion approach aimed at the identification of the hydraulic transmissivity of a confined aquifer. The robustness of the CMM is here ameliorated by (i) improving the parameterization required to handle small hydraulic gradients; (ii) investigating the role of different criteria aimed at merging multiple data-sets corresponding to different flow conditions.</p><p>On a synthetic case study, it is demonstrated that correcting a small percentage of the small hydraulic gradients (about 10%) allows to obtain reliable results, and that a criteria based on the geometric mean is adequate to merge the results coming from multiple data-sets. In addition, the use of multiple-data sets allows to noticeably improve the robustness of the CMM when the input data are affected by noise.</p><p>All the tests are performed by using open source and widely <span>used</span> tools like the USGS Modflow6 and its Python interface flopy to foster the application of the <span>CMM. The scripts and corresponding package</span>, named <em>cmmpy</em>, is available on the Python Package Index (PyPI) and on bitbucket at the following address: https://bitbucket.org/alecomunian/cmmpy.</p>


Author(s):  
Chris Goller ◽  
James Simek ◽  
Jed Ludlow

The purpose of this paper is to present a non-traditional pipeline mechanical damage ranking system using multiple-data-set in-line inspection (ILI) tools. Mechanical damage continues to be a major factor in reportable incidents for hazardous liquid and gas pipelines. While several ongoing programs seek to limit damage incidents through public awareness, encroachment monitoring, and one-call systems, others have focused efforts on the quantification of mechanical damage severity through modeling, the use of ILI tools, and subsequent feature assessment at locations selected for excavation. Current generation ILI tools capable of acquiring multiple-data-sets in a single survey may provide an improved assessment of the severity of damaged zones using methods developed in earlier research programs as well as currently reported information. For magnetic flux leakage (MFL) type tools, using multiple field levels, varied field directions, and high accuracy deformation sensors enables detection and provides the data necessary for enhanced severity assessments. This paper will provide a review of multiple-data-set ILI results from several pipe joints with simulated mechanical damage locations created mimicing right-of-way encroachment events in addition to field results from ILI surveys using multiple-data-set tools.


Sign in / Sign up

Export Citation Format

Share Document