In Situ SEM Observations of Sintering of Gold Compacts

1976 ◽  
Vol 34 ◽  
pp. 440-441
Author(s):  
E. R. Levin ◽  
G. R. Auth ◽  
K. R. Bube
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Video Tape ◽  
High Magnification ◽  
Ceramic Substrates ◽  
Direct Observations ◽  
Ceramic Surfaces ◽  
Scanning Electron ◽  
Made In

As part of a study of metallization of preglazed ceramic surfaces for hybrid microcircuits, direct observations of the sintering of gold powders at temperatures in the 800-900°C range have been made in the scanning electron microscope. The changes occurring in the layers at the high temperatures were followed in detail at high magnification. Video tape recordings were made showing the sintering of the gold and the accompanying flow of the glass bonding medium.The specimens were specially prepared for the SEM studies on thin rectangular ceramic substrates 0.13mmx2mmx8mm. The unsintered gold powder, dispersed in an organic vehicle, was screen-printed in 1 mm-wide stripes along the length of substrate. Prior to sintering, the organic binder was removed by prefiring in air, typically at 400 °C for two minutes (Fig. 1). An intermediate layer of lead-borosilicate glass was used between the substrate and the metal compact to promote adhesion on sintering.

Effect of Briquetting Pressure on the Performance of In Situ Formed Sialon in Al2O3-C Refractory Bricks

2014 ◽  
Vol 881-883 ◽  
pp. 1049-1052 ◽  
Author(s):  
Nai Peng ◽  
Cheng Ji Deng ◽  
Hong Xi Zhu
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
X Ray Diffraction ◽  
X Ray ◽  
Z Value ◽  
Refractory Bricks ◽  
Scanning Electron

In this paper, the effects of briquetting pressure on the performance of in-situ formed Sialon in Al2O3-C refractory bricks are investigated. The phase compositions and microstructure of the Al2O3-C refractory were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM).The results show the briquetting pressure hardly has effect on the phase of the sintered specimens, two new phases of Sialon with a Z value of 2 and SiC formed. The micrographs of Sialon crystals have the shape of both column and tabular column, but with a cone tip in the specimens sintered at 200MPa and 300MPa and smooth tip in specimens sintered at 400MPa and 500MPa.

In-situ Fracturing of Wood in the Scanning Electron Microscope

Holzforschung ◽  
1996 ◽  
Vol 50 (6) ◽  
pp. 487-490 ◽  
Author(s):  
Josef Bodner ◽  
Gerhard Grüll ◽  
Michael Georg Schlag
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Scanning Electron

scholarly journals Influence of Multi-Holes on Fatigue Behaviors of Cast Magnesium Alloys Based on In-Situ Scanning Electron Microscope Technology

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1700 ◽  
Author(s):  
Xi-Shu Wang ◽  
Chang-Hao Tan ◽  
Juan Ma ◽  
Xiao-Dong Zhu ◽  
Qing-Yuan Wang
Keyword(s):  
Fatigue Crack ◽  
Electron Microscope ◽  
Crack Initiation ◽  
Scanning Electron Microscope ◽  
Magnesium Alloys ◽  
Mg17al12 Phase ◽  
Cast Magnesium Alloys ◽  
Cast Magnesium ◽  
Scanning Electron

The low cycle fatigue tests on the crack initiation and propagation of cast magnesium alloys with two small holes were carried out by using in-situ scanning electron microscope (SEM) observation technology. The fatigue crack propagation behaviors and fatigue life, which are affected by two small artificial through holes, including the distances between two holes and their locations, were discussed in detail based on the experimental results and the finite element analysis (FEA). The results indicated that the fatigue multi-cracks occurred chiefly at the edges of two holes and the main crack propagation was along the weak dendrite boundary with the plastic deformation vestiges on the surface of α-Mg phase of cast AM50 and AM60B alloys. The fatigue cracking characteristics of cast AZ91 alloy depended mainly on the brittle properties of β-Mg17Al12 phase, in which the multi-cracks occurred still at the edges of two holes and boundaries of β-Mg17Al12 phase. The fatigue crack initiation position of cast magnesium alloys depends strongly on the radius of curvature of through hole or stress concentration factor at the closed edges of two through holes. In addition, the fatigue multi-cracks were amalgamated for the samples with titled 45° of two small holes of cast Mg-Al alloys when the hole distance is less than 4D (D is the diameter of the small hole).

scholarly journals Construction of in situ degradation bacteria of corn straw and analysis of its degradation efficiency

2020 ◽  
Vol 70 (1) ◽  
Author(s):  
Xiujie Gong ◽  
Hongtao Zou ◽  
Chunrong Qian ◽  
Yang Yu ◽  
Yubo Hao ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Degradation Efficiency ◽  
Corn Straw ◽  
X Ray ◽  
In Situ Degradation ◽  
Infrared Spectrometer ◽  
Scanning Electron

Abstract Purpose The highly efficient degradation bacteria were selected from the humus from the very cold straw in China for many years to construct the in situ degradation bacteria, and the degradation efficiency of corn straw was determined by process optimization. Methods According to the main components of corn straw, through morphological, physiological, and biochemical screening, three highly efficient complementary degradation strains were selected to construct the compound flora, and the degradation efficiency was analyzed by Fourier transform infrared spectrometer, field emission scanning electron microscope, and X-ray diffractometer. Result The corn straw selected in this paper is mainly composed of cellulose (31.99%), hemicellulose (25.33%), and lignin (14.67%). Through the determination of enzyme activity, strain Streptomyces sp. G1T has high decomposition ability to cellulose and hemicellulose but weak utilization ability to lignin; strain Streptomyces sp. G2T has the strongest decomposition ability to cellulose and hemicellulose among the three strains. The decomposition ability of strain Streptomyces sp. G3T to lignin was the strongest among the three strains. Therefore, by compounding the three strains, the decomposition ability has been greatly improved. The optimal process conditions obtained by single factor and response surface method are as follows: pH is 7, temperature is 30 °C, inoculation amount is 5%, rotational speed is 210 rpm, and the weight loss rate of straw is 60.55% after decomposing for 7 days. A large amount of degradation of corn straw can be seen by Fourier transform infrared spectrometer, field emission scanning electron microscope, and X-ray diffractometer. Conclusion Streptomyces sp. G1T, Streptomyces sp. G2T, and Streptomyces sp. G3T screened from straw humus in very cold areas were used to construct in situ degradation bacteria, which had good straw degradation activity and had the potential to be used for straw treatment in cold areas after harvest. This characteristic makes the complex bacteria become a strong competitive candidate for industrial production, and it is also an effective biotechnology in line with the current recycling of resources.

scholarly journals A secondary stage design for the preparation of microfossils for the SEM

1993 ◽  
Vol 12 (2) ◽  
pp. 154-154
Author(s):  
Stephen Tatman
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Low Cost ◽  
Sample Tube ◽  
Stage Design ◽  
Single Carrier ◽  
Secondary Stage ◽  
Scanning Electron ◽  
Made In

Abstract. The preparation of microfossil specimens for study with the scanning electron microscope involves the transfer of material from slides to stubs. Specimens must then be oriented and mounted securely. To do this accurately the slide and stub should both be viewed through a stereomicroscope. However due to differences in shape and height, both surfaces are not usually in the plane of focus at the same time. Many micropalaeontologists routinely use small boxes or sample tube lids to hold the stub and refocus before finally mounting the specimens. The risk of dropping specimens is reduced by using a single carrier, securely holding both the slide and stub. The design illustrated below (fig.1) was developed from a prototype constructed from cardboard and plastic. The metal unit can easily be made in a workshop at a very low cost or cardboard versions made in the laboratory.The stage is based on the principle that both slide and stub should be held securely, close together and in the same plane of focus. The slide holders should be secure but not too tight otherwise the stub may be jarred as slides are changed. The number of slides which can be held on one unit may be varied. The presence of two holders has proved useful, any more could make the unit cumbersome. If the microscope to be used does not have a wide stage then it may prove more practical to have only one holder.The stub holders allow the stub to be clamped to . . .

Sign in / Sign up

Export Citation Format

Share Document