scholarly journals Simulation of Swirling Flow with a Vortex Breakdown Using Modified Shear Stress Transport Model

Author(s):  
Yaser H. Alahmadi ◽  
Sawsan A. Awadh ◽  
Andrzej F. Nowakowski
Author(s):  
Karinate Valentine Okiy

The turbulent airflow in a circular duct with sudden expansion was investigated utilizing three turbulence models. The turbulence models chosen are: the k-epsilon model, the shear stress transport model and the Reynolds-stress model. The performance of the models was investigated with respect to the flow parameter-recirculation length. The turbulent kinetic energy and velocity predictions were compared between the turbulence models and with experimental data, then interpreted on the basis of the recirculation length. From the results, the shear stress transport model predictions of recirculation length had the closest agreement with the experimental result compared to the other model. Likewise, the convergence rate for the shear stress transport model was reasonable compared to that of the Reynolds model which has the slowest convergence rate. In light of these findings, the shear stress transport model was discovered to be the most appropriate for the investigation of turbulent air flow in a circular duct with sudden expansion. Keywords: Turbulence, recirculation length, sudden expansion, Turbulence models.


2014 ◽  
Vol 137 (2) ◽  
Author(s):  
B. Aupoix

Various corrections were previously proposed to account for wall roughness with the k–ω and shear stress transport (SST) models. A simplified analysis, based upon the wall region analysis, is proposed to characterize the behavior of these roughness corrections. As this analysis points out some deficiencies for each correction, two new corrections are proposed for the SST model, to reproduce different behaviors, mainly in the transition regime. The correction development is based upon a previously developed strategy. A large set of boundary layer experiments is used to compare the different roughness corrections, confirm the failures of previous proposals, and validate the present ones. Moreover, it assesses the proposed simplified analysis. It also evidences the difficulty to determine the equivalent sand grain roughness for a given surface. The Colebrook based correction is recommended while the Nikuradse based one can add information about the envelope of possible behaviors in the transition regime.


Author(s):  
Yu Yang ◽  
Zhang Ming-Ming ◽  
Li Xue-Song

Symmetric V-shaped riblets are simulated by using the computational fluid dynamic method to understand the riblet effects on the turbulent boundary layer and the skin friction reduction. Three classical turbulence models, namely Spalart–Allmaras, shear stress transport, and re-normalization group k-epsilon models, are investigated under different grid densities. The re-normalization group model produces good results consistent with the experiment, as compared with the existing theoretical and experimental drag results of the flat plate and the V-shaped riblets with different sizes. Simulating V-shaped riblets yield the unexpected discovery that the shear stress transport model produces large errors, and the Spalart–Allmaras model even produces results of qualitative errors. Another finding is that von Kármán’s constants can no longer meet the requirement of describing velocity profiles in the logarithmic law layer. Aside from the traditional shift of the logarithmic law’s intercept, the slope is also changed by riblet height and spacing. Therefore, an improved model of riblet effects is proposed by redefining von Kármán’s constants.


2011 ◽  
Vol 88 (3) ◽  
pp. 431-449 ◽  
Author(s):  
Mikhail S. Gritskevich ◽  
Andrey V. Garbaruk ◽  
Jochen Schütze ◽  
Florian R. Menter

Sign in / Sign up

Export Citation Format

Share Document