This research was performed to obtain high-value products from clay materials. High-grade nanometric delta-alumina (δ-Al2O3) was obtained from the modification of clay-based minerals, which could be potentially applied in the form of thin film for novel optoelectronic applications. The selective recovery process of alumina from clay materials presents an important advantage regarding the complete removal of other starting constituents such as silica, iron, titanium, alkali, and alkaline earth metals. To accomplish the selective removal of different species, an acid leaching route was used to extract the aluminum, then the iron impurities were eliminated by alkaline precipitation. The solution was acidized to precipitate the aluminum as aluminum chloride hexahydrate. Finally, the aluminum chloride hexahydrate was calcinated to obtain nano-delta-alumina with purity of over 98.5% Al2O3. The dominating crystalline phase was delta–gamma alumina (δ-phase and γ-phase), with a particle size of <140 nm. Then, these nanoparticles (NPs) were prepared as a stable colloidal dispersion to form a mesoporous layer employing the spin-coating technique. Initially, the synthesized alumina was characterized by atomic force microscopy (AFM) and TEM to determine the particle size and its morphology, whereas the colloidal dispersion was analyzed by rheological measurements. Finally, the findings of this investigation made it possible to get thin films with good porosity, which can be used in optoelectronic applications, specifically in perovskite solar cells.
Phase Equilibrium Study of the CaO-SiO2-MgO-Al2O3-TiO2 System at 1300°C and 1400°C in Air
