Separation of zinc isotopes by liquid-phase thermal diffusion

It has been almost universally adopted that dissolution of solids proceeds with development of uniform, continuous frontiers of reaction.However this point of view is doubtful / 1 /. E.g. we have proved the active role of the block (grain) boundaries in the main phases of cement, these boundaries being the areas of hydrate phases' nucleation / 2 /. It has brought to the supposition that the dissolution frontier of cement particles in water is discrete. It seems also probable that the dissolution proceeds through the channels, which serve both for the liquid phase movement and for the drainage of the incongruant solution products. These channels can be appeared along the block boundaries.In order to demonsrate it, we have offered the method of phase-contrast impregnation of the hardened cement paste with the solution of methyl metacrylahe and benzoyl peroxide. The viscosity of this solution is equal to that of water.

Download Full-text

Identification of hepatitis a virus in cell cultures by solid phase immune electron microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100142815 ◽

1986 ◽

Vol 44 ◽

pp. 238-239

Author(s):

C.D. Humphrey ◽

T.L. Cromeans ◽

E.H. Cook ◽

D.W. Bradley

Keyword(s):

Electron Microscopy ◽

Liquid Phase ◽

Cell Cultures ◽

Rapid Detection ◽

Hepatitis A ◽

Hepatitis A Virus ◽

Solid Phase ◽

Immune Electron Microscopy ◽

Detection And Identification

There is a variety of methods available for the rapid detection and identification of viruses by electron microscopy as described in several reviews. The predominant techniques are classified as direct electron microscopy (DEM), immune electron microscopy (IEM), liquid phase immune electron microscopy (LPIEM) and solid phase immune electron microscopy (SPIEM). Each technique has inherent strengths and weaknesses. However, in recent years, the most progress for identifying viruses has been realized by the utilization of SPIEM.

Download Full-text

Microanalysis of silicate glass films grown on α-Al2O3 by pulsed-laser deposition

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100148022 ◽

1993 ◽

Vol 51 ◽

pp. 438-439

Author(s):

Michael P. Mallamaci ◽

James Bentley ◽

C. Barry Carter

Keyword(s):

Liquid Phase ◽

Single Crystal ◽

Pulsed Laser Deposition ◽

Pulsed Laser ◽

Ceramic Materials ◽

Laser Deposition ◽

Triple Junctions ◽

Ion Milling ◽

Multicomponent Oxides ◽

Glass Films

Glass-oxide interfaces play important roles in developing the properties of liquid-phase sintered ceramics and glass-ceramic materials. Deposition of glasses in thin-film form on oxide substrates is a potential way to determine the properties of such interfaces directly. Pulsed-laser deposition (PLD) has been successful in growing stoichiometric thin films of multicomponent oxides. Since traditional glasses are multicomponent oxides, there is the potential for PLD to provide a unique method for growing amorphous coatings on ceramics with precise control of the glass composition. Deposition of an anorthite-based (CaAl2Si2O8) glass on single-crystal α-Al2O3 was chosen as a model system to explore the feasibility of PLD for growing glass layers, since anorthite-based glass films are commonly found in the grain boundaries and triple junctions of liquid-phase sintered α-Al2O3 ceramics.Single-crystal (0001) α-Al2O3 substrates in pre-thinned form were used for film depositions. Prethinned substrates were prepared by polishing the side intended for deposition, then dimpling and polishing the opposite side, and finally ion-milling to perforation.

Download Full-text