Low-Temperature Catalytic Oxidation of Monochlorobenzene by Ozone over Silica-Supported Manganese Oxide

2011 ◽  
Vol 50 (23) ◽  
pp. 13322-13329 ◽  
Author(s):  
Hsu Sheng Liang ◽  
Hou Chuan Wang ◽  
Moo Been Chang
2012 ◽  
Vol 18 (2) ◽  
pp. 757-762 ◽  
Author(s):  
Qiong Huang ◽  
Zhi-Yuan Zhang ◽  
Wen-Jiao Ma ◽  
Ying-Wen Chen ◽  
She-Min Zhu ◽  
...  

2016 ◽  
Vol 690 ◽  
pp. 282-285
Author(s):  
Soravich Mulinta

The purpose of the study was to investigate the effects of dolomite body, frit and potassium feldspar on the properties of color slip for decorative method of color slip on earthen ware production. The characterization of raw material was analyzed by X-ray fluorescence (XRF). The experiment started with triaxial blend of dolomite body, frit and potassium feldspar in the defined ratio and then to painting of color slips on earthenware production. After that, firing specimens at 950 °C in oxidation atmosphere. Finally, the specimens were tested microstructure and physical properties. The results showed that the ratio of 50% dolomite body, 40% frit and 10% potassium feldspar were optimum properties for decorative on earthenware body. In color slip consisting of blue color added Cobalt oxide 1% ,Green colors added chromic oxide 10% , Gray color added manganese oxide 10% ,yellow color added stain 2225 10% and hazel color added ferric oxide 2 wt %.


2013 ◽  
Vol 1 (9) ◽  
pp. 1070-1074 ◽  
Author(s):  
Harish Veeramani ◽  
Deborah Aruguete ◽  
Niven Monsegue ◽  
Mitsuhiro Murayama ◽  
Urs Dippon ◽  
...  

Author(s):  
Hailin Zhao ◽  
Jie Tang ◽  
Zengyuan Li ◽  
Jie Yang ◽  
Hao Liu ◽  
...  

Catalytic oxidation is the most effective method to eliminate the in-door formaldehyde, the Mn-based catalyst with low cost and high activity has drawn great attention. Herein, p-type semiconductor NiO doped...


2018 ◽  
Vol 122 (44) ◽  
pp. 25456-25466 ◽  
Author(s):  
Jing-Jing Li ◽  
Bao-Lin Zhu ◽  
Gui-Chang Wang ◽  
Zun-Feng Liu ◽  
Wei-Ping Huang ◽  
...  

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4534
Author(s):  
Miguel Jose Marin Figueredo ◽  
Clarissa Cocuzza ◽  
Samir Bensaid ◽  
Debora Fino ◽  
Marco Piumetti ◽  
...  

A set of manganese oxide catalysts was synthesized via two preparation techniques: solution combustion synthesis (Mn3O4/Mn2O3-SCS and Mn2O3-SCS) and sol-gel synthesis (Mn2O3-SG550 and Mn2O3-SG650). The physicochemical properties of the catalysts were studied by means of N2-physisorption at −196 °C, X-ray powder diffraction, H2 temperature-programmed reduction (H2-TPR), soot-TPR, X-ray photoelectron spectroscopy (XPS) and field-emission scanning electron microscopy (FESEM). The high catalytic performance of the catalysts was verified in the oxidation of Volatile Organic Compounds (VOC) probe molecules (ethene and propene) and carbon soot in a temperature-programmed oxidation setup. The best catalytic performances in soot abatement were observed for the Mn2O3-SG550 and the Mn3O4/Mn2O3-SCS catalysts. The catalytic activity in VOC total oxidation was effectively correlated to the enhanced low-temperature reducibility of the catalysts and the abundant surface Oα-species. Likewise, low-temperature oxidation of soot in tight contact occurred over the Mn2O3-SG550 catalyst and was attributed to high amounts of surface Oα-species and better surface reducibility. For the soot oxidation in loose contact, the improved catalytic performance of the Mn3O4/Mn2O3-SCS catalyst was attributed to the beneficial effects of both the morphological structure that—like a filter—enhanced the capture of soot particles and to a probable high amount of surface acid-sites, which is characteristic of Mn3O4 catalysts.


2011 ◽  
Vol 27 (01) ◽  
pp. 169-176 ◽  
Author(s):  
YE Qing ◽  
◽  
ZHAO Jian-Sheng ◽  
LI Dong-Hui ◽  
ZHAO Jun ◽  
...  

2018 ◽  
Vol 53 (24) ◽  
pp. 16288-16302 ◽  
Author(s):  
Huifang Pang ◽  
Ahmed M. Abdalla ◽  
Rakesh P. Sahu ◽  
Yuping Duan ◽  
Ishwar K. Puri

Sign in / Sign up

Export Citation Format

Share Document