Synthesis of High Molecular Weight Copolymers by Ruthenium-Catalyzed Step-Growth Copolymerization of Acetophenone with .alpha.,.omega.-Dienes

1995 ◽  
Vol 28 (16) ◽  
pp. 5686-5687 ◽  
Author(s):  
Hongjie Guo ◽  
Guohong Wang ◽  
Mark A. Tapsak ◽  
William P. Weber
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Alpha Omega ◽  
Step Growth

scholarly journals Hyperbranched polymers with step-growth chemistries from transfer-dominated branching radical telomerisation (TBRT) of divinyl monomers

2020 ◽  
Vol 11 (48) ◽  
pp. 7637-7649
Author(s):  
Savannah R. Cassin ◽  
Pierre Chambon ◽  
Steve P. Rannard
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Hyperbranched Polymers ◽  
Branched Polymers ◽  
Novel Materials ◽  
Step Growth

The commercially relevant synthesis of novel materials with step-growth backbones has been achieved by applying conventional chemistries to the radical telomerisation of divinyl monomers leading to high molecular weight branched polymers.

scholarly journals New 1,2,3-Triazole Containing PolyestersviaClick Step-Growth Polymerization and Nanoparticles Made of Them

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Tengiz Kantaria ◽  
Temur Kantaria ◽  
Giorgi Titvinidze ◽  
Giuli Otinashvili ◽  
Nino Kupatadze ◽  
...  
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Sodium Azide ◽  
Dicarboxylic Acids ◽  
Solution Concentration ◽  
One Pot ◽  
Bromoacetic Acid ◽  
Aliphatic Polyesters ◽  
Step Growth ◽  
Step Growth Polymerization

High-molecular-weight AA-BB-type aliphatic polyesters were synthesizedviaCu(I)-catalyzed click step-growth polymerization (SGP) following a new synthetic strategy. The synthesis was performed between diyne and diazide monomers in an organic solvent as one pot process using three components and two stages. The dipropargyl esters of dicarboxylic acids (component 1) were used as diyne monomers, di-(bromoacetic acid)-alkylene diesters (component 2) were used as precursors of diazide monomers, and sodium azide (component 3) was used for generating diazide monomers. The SGP was carried out in two steps: at Step  1 dibromoacetates interacted with two moles of sodium azide resulting in diazide monomers which interacted in situ with diyne monomers at Step  2 in the presence of Cu(I) catalyst. A systematic study was done for optimizing the multiparameter click SGP in terms of the solvent, duration of both Step  1 and Step  2, solution concentration, catalyst concentration, catalyst and catalyst activator (ligand) nature, catalyst/ligand mole ratio, and temperature of both steps of the click SGP. As a result, high-molecular-weight (MWup to 74 kDa) elastic film-forming click polyesters were obtained. The new polymers were found suitable for fabricating biodegradable nanoparticles, which are promising as drug delivery containers in nanotherapy.

Extremely rapid and versatile synthesis of high molecular weight step growth polymers via oxime click chemistry

2016 ◽  
Vol 7 (14) ◽  
pp. 2581-2588 ◽  
Author(s):  
Joe Collins ◽  
Zeyun Xiao ◽  
Andrea Espinosa-Gomez ◽  
Brett P. Fors ◽  
Luke A. Connal
Keyword(s):  
Molecular Weight ◽  
Click Chemistry ◽  
High Molecular Weight ◽  
Step Growth ◽  
Step Growth Polymerization

Extremely rapid step growth polymerization was achieved using an oxime click chemistry approach.

Microtubule motors and other maps

1990 ◽  
Vol 48 (3) ◽  
pp. 1-1
Author(s):  
Richard B. Vallee
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Cytoplasmic Dynein ◽  
Organelle Transport ◽  
Structural Components ◽  
Microtubule Associated Proteins ◽  
Microtubule Motors ◽  
Associated Proteins ◽  
The Subject ◽  
Intracellular Motility

Microtubules are involved in a number of forms of intracellular motility, including mitosis and bidirectional organelle transport. Purified microtubules from brain and other sources contain tubulin and a diversity of microtubule associated proteins (MAPs). Some of the high molecular weight MAPs - MAP 1A, 1B, 2A, and 2B - are long, fibrous molecules that serve as structural components of the cytamatrix. Three MAPs have recently been identified that show microtubule activated ATPase activity and produce force in association with microtubules. These proteins - kinesin, cytoplasmic dynein, and dynamin - are referred to as cytoplasmic motors. The latter two will be the subject of this talk.Cytoplasmic dynein was first identified as one of the high molecular weight brain MAPs, MAP 1C. It was determined to be structurally equivalent to ciliary and flagellar dynein, and to produce force toward the minus ends of microtubules, opposite to kinesin.

Antioxidant activity of the high-molecular-weight (HMW) phenolic fraction of pecans

Planta Medica ◽  
2016 ◽  
Vol 81 (S 01) ◽  
pp. S1-S381
Author(s):  
P Greenspan ◽  
MB Kellett ◽  
RB Pegg
Keyword(s):  
Molecular Weight ◽  
Antioxidant Activity ◽  
High Molecular Weight ◽  
Phenolic Fraction

Studies on the Functionality of Newly Synthesized Fibrinogen after Treatment of Acute Myocardial Infarction with Streptokinase, Increase in the Rate of Fibrinopeptide Release

1993 ◽  
Vol 70 (06) ◽  
pp. 0978-0983 ◽  
Author(s):  
Edelmiro Regano ◽  
Virtudes Vila ◽  
Justo Aznar ◽  
Victoria Lacueva ◽  
Vicenta Martinez ◽  
...  
Keyword(s):  
Myocardial Infarction ◽  
Acute Myocardial Infarction ◽  
Molecular Weight ◽  
Steady State ◽  
High Molecular Weight ◽  
Coronary Arteries ◽  
Risk Index ◽  
Weight Fraction ◽  
High Molecular Weight Fraction ◽  
Fibrinopeptide A

SummaryIn 15 patients with acute myocardial infarction who received 1,500,000 U of streptokinase, the gradual appearance of newly synthesized fibrinogen and the fibrinopeptide release during the first 35 h after SK treatment were evaluated. At 5 h the fibrinogen circulating in plasma was observed as the high molecular weight fraction (HMW-Fg). The concentration of HMW-Fg increased continuously, and at 20 h reached values higher than those obtained from normal plasma. HMW-Fg represented about 95% of the total fibrinogen during the first 35 h. The degree of phosphorylation of patient fibrinogen increased from 30% before treatment to 65% during the first 5 h, and then slowly declined to 50% at 35 h.The early rates of fibrinopeptide A (FPA) and phosphorylated fibrinopeptide A (FPAp) release are higher in patient fibrinogen than in isolated normal HMW-Fg and normal fibrinogen after thrombin addition. The early rate of fibrinopeptide B (FPB) release is the same for the three fibrinogen groups. However, the late rate of FPB release is higher in patient fibrinogen than in normal HMW-Fg and normal fibrinogen. Therefore, the newly synthesized fibrinogen clots faster than fibrinogen in the normal steady state.In two of the 15 patients who had occluded coronary arteries after SK treatment the HMW-Fg and FPAp levels increased as compared with the 13 patients who had patent coronary arteries.These results provide some support for the idea that an increased synthesis of fibrinogen in circulation may result in a procoagulant tendency. If this is so, the HMW-Fg and FPAp content may serve as a risk index for thrombosis.

The Effect of Dextran of Various Molecular Weight on the Coagulation in Dogs

1961 ◽  
Vol 06 (01) ◽  
pp. 015-024 ◽  
Author(s):  
Sven Erik Bergentz ◽  
Oddvar Eiken ◽  
Inga Marie Nilsson
Keyword(s):  
Molecular Weight ◽  
Body Weight ◽  
High Molecular Weight ◽  
Bleeding Time ◽  
Factor Vii ◽  
Low Molecular Weight ◽  
Factor V ◽  
Coagulation Mechanism ◽  
Coagulation Defects

Summary1. Infusions of low molecular weight dextran (Mw = 42 000) to dogs in doses of 1—1.5 g per kg body weight did not produce any significant changes in the coagulation mechanism.2. Infusions of high molecular weight dextran (Mw = 1 000 000) to dogs in doses of 1—1.5 g per kg body weight produced severe defects in the coagulation mechanism, namely prolongation of bleeding time and coagulation time, thrombocytopenia, pathological prothrombin consumption, decrease of fibrinogen, prothrombin and factor VII, factor V and AHG.3. Heparin treatment of the dogs was found to prevent the decrease of fibrinogen, prothrombin and factor VII, and factor V otherwise occurring after injection of high molecular weight dextran. Thrombocytopenia was not prevented.4. In in vitro experiments an interaction between fibrinogen and dextran of high and low molecular weight was found to take place in systems comprising pure fibrinogen. No such interaction occurred in the presence of plasma.5. It is concluded that the coagulation defects induced by infusions of high molecular weight dextran are due to intravascular coagulation.

Sign in / Sign up

Export Citation Format

Share Document