Why Single-Beam Optical Tweezers Trap Gold Nanowires in Three Dimensions

ACS Nano ◽  
2013 ◽  
Vol 7 (10) ◽  
pp. 8794-8800 ◽  
Author(s):  
Zijie Yan ◽  
Matthew Pelton ◽  
Leonid Vigderman ◽  
Eugene R. Zubarev ◽  
Norbert F. Scherer
2020 ◽  
Vol 52 (1) ◽  
pp. 205-234 ◽  
Author(s):  
M. Baudoin ◽  
J.-L. Thomas

Acoustic tweezers powerfully enable the contactless collective or selective manipulation of microscopic objects. Trapping is achieved without pretagging, with forces several orders of magnitude larger than optical tweezers at the same input power, limiting spurious heating and enabling damage-free displacement and orientation of biological samples. In addition, the availability of acoustical coherent sources from kilo- to gigahertz frequencies enables the manipulation of a wide spectrum of particle sizes. After an introduction of the key physical concepts behind fluid and particle manipulation with acoustic radiation pressure and acoustic streaming, we highlight the emergence of specific wave fields, called acoustical vortices, as a means to manipulate particles selectively and in three dimensions with one-sided tweezers. These acoustic vortices can also be used to generate hydrodynamic vortices whose topology is controlled by the topology of the wave. We conclude with an outlook on the field's future directions.


1991 ◽  
Vol 114 (5) ◽  
pp. 1029-1036 ◽  
Author(s):  
D F Kucik ◽  
S C Kuo ◽  
E L Elson ◽  
M P Sheetz

The active forward movement of cells is often associated with the rearward transport of particles over the surfaces of their lamellae. Unlike the rest of the lamella, we found that the leading edge (within 0.5 microns of the cell boundary) is specialized for rearward transport of membrane-bound particles, such as Con A-coated latex microspheres. Using a single-beam optical gradient trap (optical tweezers) to apply restraining forces to particles, we can capture, move and release particles at will. When first bound on the central lamellar surface, Con A-coated particles would diffuse randomly; when such bound particles were brought to the leading edge of the lamella with the optical tweezers, they were often transported rearward. As in our previous studies, particle transport occurred with a concurrent decrease in apparent diffusion coefficient, consistent with attachment to the cytoskeleton. For particles at the leading edge of the lamella, weak attachment to the cytoskeleton and transport occurred with a half-time of 3 s; equivalent particles elsewhere on the lamella showed no detectable attachment when monitored for several minutes. Particles held on the cell surface by the laser trap attached more strongly to the cytoskeleton with time. These particles could escape a trapping force of 0.7 X 10(-6) dyne after 18 +/- 14 (sd) s at the leading edge, and after 64 +/- 34 (SD) s elsewhere on the lamella. Fluorescent succinylated Con A staining showed no corresponding concentration of general glycoproteins at the leading edge, but cytochalasin D-resistant filamentous actin was found at the leading edge. Our results have implications for cell motility: if the forces used for rearward particle transport were applied to a rigid substratum, cells would move forward. Such a mechanism would be most efficient if the leading edge of the cell contained preferential sites for attachment and transport.


2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Sean S. Kohles ◽  
Yu Liang ◽  
Asit K. Saha

Controlled external chemomechanical stimuli have been shown to influence cellular and tissue regeneration/degeneration, especially with regards to distinct disease sequelae or health maintenance. Recently, a unique three-dimensional stress state was mathematically derived to describe the experimental stresses applied to isolated living cells suspended in an optohydrodynamic trap (optical tweezers combined with microfluidics). These formulae were previously developed in two and three dimensions from the fundamental equations describing creeping flows past a suspended sphere. The objective of the current study is to determine the full-field cellular strain response due to the applied three-dimensional stress environment through a multiphysics computational simulation. In this investigation, the multiscale cytoskeletal structures are modeled as homogeneous, isotropic, and linearly elastic. The resulting computational biophysics can be directly compared with experimental strain measurements, other modeling interpretations of cellular mechanics including the liquid drop theory, and biokinetic models of biomolecule dynamics. The described multiphysics computational framework will facilitate more realistic cytoskeletal model interpretations, whose intracellular structures can be distinctly defined, including the cellular membrane substructures, nucleus, and organelles.


2019 ◽  
Vol 114 (8) ◽  
pp. 081903 ◽  
Author(s):  
X. Z. Li ◽  
H. X. Ma ◽  
H. Zhang ◽  
M. M. Tang ◽  
H. H. Li ◽  
...  
Keyword(s):  

1995 ◽  
Vol 1 (2) ◽  
pp. 65-74
Author(s):  
Scot C. Kuo

Optical tweezers, or the single-beam optical gradient force trap, is becoming a major tool in biology for noninvasive micromanipulation on an optical microscope. The principles and practical aspects that influence construction are presented in an introductory primer. Quantitative theories are also reviewed but have yet to supplant user calibration. Various biological applications are summarized, including recent quantitative force and displacement measurements. Finally, tantalizing developments for new, nonimaging microscopy techniques based on optical tweezers are included.


2016 ◽  
Vol 48 (12) ◽  
Author(s):  
Trung Thai Dinh ◽  
Khoa Doan Quoc ◽  
Kien Bui Xuan ◽  
Quy Ho Quang

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Andrew B. Matheson ◽  
Lynn Paterson ◽  
Amanda J. Wright ◽  
Tania Mendonca ◽  
Manlio Tassieri ◽  
...  

AbstractWe introduce a novel 3D microrheology system that combines for the first time Optical Tweezers with Integrated Multiplane Microscopy (OpTIMuM). The system allows the 3D tracking of an optically trapped bead, with ~ 20 nm accuracy along the optical axis. This is achieved without the need for a high precision z-stage, separate calibration sample, nor a priori knowledge of either the bead size or the optical properties of the suspending medium. Instead, we have developed a simple yet effective in situ spatial calibration method using image sharpness and exploiting the fact we image at multiple planes simultaneously. These features make OpTIMuM an ideal system for microrheology measurements, and we corroborate the effectiveness of this novel microrheology tool by measuring the viscosity of water in three dimensions, simultaneously.


Science ◽  
2021 ◽  
Vol 373 (6556) ◽  
pp. 779-782
Author(s):  
Loïc Anderegg ◽  
Sean Burchesky ◽  
Yicheng Bao ◽  
Scarlett S. Yu ◽  
Tijs Karman ◽  
...  

Harnessing the potential wide-ranging quantum science applications of molecules will require control of their interactions. Here, we used microwave radiation to directly engineer and tune the interaction potentials between ultracold calcium monofluoride (CaF) molecules. By merging two optical tweezers, each containing a single molecule, we probed collisions in three dimensions. The correct combination of microwave frequency and power created an effective repulsive shield, which suppressed the inelastic loss rate by a factor of six, in agreement with theoretical calculations. The demonstrated microwave shielding shows a general route to the creation of long-lived, dense samples of ultracold polar molecules and evaporative cooling.


Sign in / Sign up

Export Citation Format

Share Document