scholarly journals Climate sensitivity to black carbon aerosol from fossil fuel combustion

2004 ◽  
Vol 109 (D16) ◽  
Author(s):  
David L. Roberts
2019 ◽  
Vol 19 (17) ◽  
pp. 11545-11557 ◽  
Author(s):  
Ling Qi ◽  
Shuxiao Wang

Abstract. We identify sources (fossil fuel combustion versus biomass burning) of black carbon (BC) in the atmosphere and in deposition using a global 3-D chemical transport model GEOS-Chem. We validate the simulated sources against carbon isotope measurements of BC around the globe and find that the model reproduces mean biomass burning contribution (fbb; %) in various regions within a factor of 2 (except in Europe, where fbb is underestimated by 63 %). GEOS-Chem shows that contribution from biomass burning in the Northern Hemisphere (fbb: 35±14 %) is much less than that in the Southern Hemisphere (50±11 %). The largest atmospheric fbb is in Africa (64±20 %). Comparable contributions from biomass burning and fossil fuel combustion are found in southern (S) Asia (53±10 %), southeastern (SE) Asia (53±11 %), S America (47±14 %), the S Pacific (47±7 %), Australia (53±14 %) and the Antarctic (51±2 %). fbb is relatively small in eastern Asia (40±13 %), Siberia (35±8 %), the Arctic (33±6 %), Canada (31±7 %), the US (25±4 %) and Europe (19±7 %). Both observations and model results suggest that atmospheric fbb is higher in summer (59 %–78 %, varying with sub-regions) than in winter (28 %–32 %) in the Arctic, while it is higher in winter (42 %–58 %) and lower in summer (16 %–42 %) over the Himalayan–Tibetan Plateau. The seasonal variations of Atmosphericfbb are relatively flat in North America, Europe and Asia. We conducted four experiments to investigate the uncertainties associated with biofuel emissions, hygroscopicity of BC in fresh emissions, the aging rate and size-resolved wet scavenging. We find that doubling biofuel emissions for domestic heating north of 45∘ N increases fbb values in Europe in winter by ∼30 %, reducing the discrepancy between observed and modeled atmospheric fbb from −63 % to −54 %. The remaining large negative discrepancy between model and observations suggests that the biofuel emissions are probably still underestimated at high latitudes. Increasing the fraction of thickly coated hydrophilic BC from 20 % to 70 % in fresh biomass burning plumes increases the fraction of hydrophilic BC in biomass burning plumes by 0 %–20 % (varying with seasons and regions) and thereby reduces atmospheric fbb by up to 11 %. Faster aging (4 h e-folding time versus 1.15 d e-folding time) of BC in biomass burning plumes reduces atmospheric fbb by 7 % (1 %–14 %, varying with seasons and regions), with the largest reduction in remote regions, such as the Arctic, the Antarctic and the S Pacific. Using size-resolved scavenging accelerates scavenging of BC particles in both fossil fuel and biomass burning plumes, with a faster scavenging of BC in fossil fuel plumes. Thus, atmospheric fbb increases in most regions by 1 %–14 %. Overall, atmospheric fbb is determined mainly by fbb in emissions and, to a lesser extent, by atmospheric processes, such as aging and scavenging. This confirms the assumption that fbb in local emissions determines atmospheric fbb in previous studies, which compared measured atmospheric fbb directly with local fbb in bottom-up emission inventories.


Atmosphere ◽  
2017 ◽  
Vol 8 (12) ◽  
pp. 234 ◽  
Author(s):  
Evangelia Diapouli ◽  
Athina-Cerise Kalogridis ◽  
Christina Markantonaki ◽  
Stergios Vratolis ◽  
Prodromos Fetfatzis ◽  
...  

2021 ◽  
Vol 12 (2) ◽  
pp. 23-28
Author(s):  
Md Dulal Hossain Khan ◽  
Mahima Sultana Sarkar ◽  
Syeda Sadika Haque ◽  
Md Amjad Hossain

Fossil fuel combustion is one of the major sources of carbonaceous emission throughout the world. In this study, two light absorbing carbonaceous aerosol namely Black carbon (BC) and Brown carbon (BrC) from fossil fuel combustion under controlled laboratory condition was reported. Four different fossil fuels; octane, petrol, diesel and kerosene was taken as samples (Four different fossil fuels; octane, petrol, diesel, and kerosene samples were collected from filling station of Nilkhet, Dhaka City. Two wavelengths Aethalometer (OT21) had been taken for systematic analysis of Black carbon and Brown carbon. BC and BrC particulates were determined in terms of density, concentration, emission and emission factor. The concentrations of Black carbon in mgm-3 for respective fuel samples were kerosene (3.83), diesel (4.59), petrol (7.94), octane (13.18) while concentrations of Brown carbon were kerosene (7.77), diesel (7.98), petrol (13.61), octane (20.46). BrC concentrations were found to be higher than those of BC for all the fuel samples. Average concentrations of Black carbon and Brown carbon were 7.38 mgm-3 and 11.46 mgm-3 respectively. Thereafter, health risk assessment for chronic exposure to Black carbon was done (estimated/ evaluated/ calculated) according to the U.S. EPA human health risk assessment protocol. Experimental results were correlated with the data given by the Exposure Factors Handbook of EPA for assessing carcinogenic and non-carcinogenic risk associated with BC. Total carcinogenic risk (CR) was found to be 3.27 for adults and 1.34 for children. While total noncarcinogenic risk i.e hazard quotient (HQ) for adults and children were 243.32 and 594.32 respectively. Both CR and HQ values crossed the safe limit given by the US EPA protocol indicating high probability of the occurrence of adverse health effects. Journal of Engineering Science 12(2), 2021, 23-28


2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Huang Zheng ◽  
Shaofei Kong ◽  
Nan Chen ◽  
Zewei Fan ◽  
Ying Zhang ◽  
...  

AbstractThe result of Aethalometer model to black carbon (BC) source apportionment is highly determined by the absorption Ångström exponent (α) of aerosols from fossil fuel combustion (αff) and wood burning (αwb). A method using hourly measured potassium to calculate the αff and αwb values was developed in this study. Results showed that the optimal αff and αwb were 1.09 and 1.79 for the whole dataset. The optimal α values in the diurnal resolution were also calculated with αff and αwb varied in 1.02 –1.19 and 1.71–1.90, respectively. Using the dynamic α values, the Pearson correlation coefficient between BC and potassium from wood burning substantially improved compared to the results derived from the fixed α values. The method developed in this study is expected to provide more reasonable BC source identification results, which are helpful for air quality, climate, and human health modeling studies.


Science ◽  
1972 ◽  
Vol 175 (4027) ◽  
pp. 1279-1279
Author(s):  
K. K. Bertine ◽  
Edward D. Goldberg

2013 ◽  
Vol 13 (15) ◽  
pp. 7695-7710 ◽  
Author(s):  
Y. Takahashi ◽  
T. Furukawa ◽  
Y. Kanai ◽  
M. Uematsu ◽  
G. Zheng ◽  
...  

Abstract. Atmospheric iron (Fe) can be a significant source of nutrition for phytoplankton inhabiting remote oceans, which in turn has a large influence on the Earth's climate. The bioavailability of Fe in aerosols depends mainly on the fraction of soluble Fe (= [FeSol]/[FeTotal], where [FeSol] and [FeTotal] are the atmospheric concentrations of soluble and total Fe, respectively). However, the numerous factors affecting the soluble Fe fraction have not been fully understood. In this study, the Fe species, chemical composition, and soluble Fe concentrations in aerosols collected in Tsukuba, Japan were investigated over a year (nine samples from December 2002 to October 2003) to identify the factors affecting the amount of soluble Fe supplied into the ocean. The soluble Fe concentration in aerosols is correlated with those of sulfate and oxalate originated from anthropogenic sources, suggesting that soluble Fe is mainly derived from anthropogenic sources. Moreover, the soluble Fe concentration is also correlated with the enrichment factors of vanadium and nickel emitted by fossil fuel combustion. These results suggest that the degree of Fe dissolution is influenced by the magnitude of anthropogenic activity, such as fossil fuel combustion. X-ray absorption fine structure (XAFS) spectroscopy was performed in order to identify the Fe species in aerosols. Fitting of XAFS spectra coupled with micro X-ray fluorescence analysis (μ-XRF) showed the main Fe species in aerosols in Tsukuba to be illite, ferrihydrite, hornblende, and Fe(III) sulfate. Moreover, the soluble Fe fraction in each sample measured by leaching experiments is closely correlated with the Fe(III) sulfate fraction determined by the XAFS spectrum fitting, suggesting that Fe(III) sulfate is the main soluble Fe in the ocean. Another possible factor that can control the amount of soluble Fe supplied into the ocean is the total Fe(III) concentration in the atmosphere, which was high in spring due to the high mineral dust concentrations during spring in East Asia. However, this factor does not contribute to the amount of soluble Fe to a larger degree than the effect of Fe speciation, or more strictly speaking the presence of Fe(III) sulfate. Therefore, based on these results, the most significant factor influencing the amount of soluble Fe in the North Pacific region is the concentration of anthropogenic Fe species such as Fe(III) sulfate that can be emitted from megacities in Eastern Asia.


Sign in / Sign up

Export Citation Format

Share Document