NIE picks Harvard as technology center

1983 ◽  
Author(s):  
Colleen Cordes ◽  
Keyword(s):  
Technology Center

Trash shredder mounted on chopped sugarcane harvester, model John Deere 3520

2016 ◽  
pp. 713-719
Author(s):  
Jorge L.M. Neves ◽  
Natália de C.T. Calori ◽  
Reinaldo C.M. Pimenta ◽  
Celso Aparecido Sarto ◽  
Thales H.Y. Noleto
Keyword(s):  
Particle Size ◽  
Technology Center ◽  
Increasing Trend ◽  
Tillage Operation ◽  
Sugarcane Harvester ◽  
Vegetable Material

With the increasing trend of mechanized harvesting of green sugarcane the trash residue needs to be used. Leaving large amounts of trash remaining on the field can sometimes lead to problems such as delay of sprouting of tillers, increased levels of leafhopper infestation and difficulty of tillage operation. Windrowing of trash after harvesting can minimize these problems. To eliminate the operation of trash windrowing and to facilitate the trash decomposition, the Sugarcane Technology Center, CTC (Centro de Tecnologia Canavieira), Brazil developed a trash shredder system for a primary extractor of John Deere chopper sugarcane harvester. Using rotating knives all vegetable material passing through the primary extractor is chopped, thereby reducing the particle size. After some adjustments, preliminary tests were carried out to prove the efficiency of chopping and sugarcane cleaning. The machine produces a much smaller trash particle size than conventional harvesters. The system shows promise in shredding trash either for use at the mill or for dispersion on the field.

The NREL Large-Scale Turbine Inflow and Response Experiment: Preliminary Results

2002 ◽  
Author(s):  
Neil Kelley ◽  
Maureen Hand ◽  
Scott Larwood ◽  
Ed McKenna
Keyword(s):  
Wind Turbine ◽  
Large Scale ◽  
Structural Response ◽  
Technology Center ◽  
Operating Environments ◽  
Sonic Anemometers ◽  
Wide Range ◽  
Scaling Parameters ◽  
Planar Array ◽  
Turbulence Scaling

The accurate numerical dynamic simulation of new large-scale wind turbine designs operating over a wide range of inflow environments is critical because it is usually impractical to test prototypes in a variety of locations. Large turbines operate in a region of the atmospheric boundary layer that currently may not be adequately simulated by present turbulence codes. In this paper, we discuss the development and use of a 42-m (137-ft) planar array of five, high-resolution sonic anemometers upwind of a 600-kW wind turbine at the National Wind Technology Center (NWTC). The objective of this experiment is to obtain simultaneously collected turbulence information from the inflow array and the corresponding structural response of the turbine. The turbulence information will be used for comparison with that predicted by currently available codes and establish any systematic differences. These results will be used to improve the performance of the turbulence simulations. The sensitivities of key elements of the turbine aeroelastic and structural response to a range of turbulence-scaling parameters will be established for comparisons with other turbines and operating environments. In this paper, we present an overview of the experiment, and offer examples of two observed cases of inflow characteristics and turbine response collected under daytime and nighttime conditions, and compare their turbulence properties with predictions.

Sign in / Sign up

Export Citation Format

Share Document