scholarly journals Femtosecond laser induced low propagation loss waveguides in a lead-germanate glass for efficient lasing in near to mid-IR

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mamoona Khalid ◽  
George Y. Chen ◽  
Heike Ebendorff-Heidepreim ◽  
David G. Lancaster

AbstractTo support the growing landscape of near to mid-IR laser applications we demonstrate a range of low propagation loss femtosecond laser (FSL) written waveguides (WGs) that have achieved guided-mode laser operation in a rare earth (RE) doped lead-germanate glass. The WGs are fabricated in both the athermal and thermal FSL writing regimes using three different pulse repetition frequencies (PRF): 100 kHz (athermal); 1 MHz; and 5 MHz (thermal). The lasing capability of Yb3+ doped lead-germanate waveguides is verified in the near-IR. The refractive index contrast (∆n) for 100 kHz WGs is ~ 1 × 10–4, while for 5 MHz, ∆n increases to ~ 5 × 10–4. The WGs in the thermal regime are less effected by self-focusing and are larger in dimensions with reduced propagation losses. For the 1 MHz repetition rate thermal writing regime we report a low propagation loss WG (0.2 dB/cm) and demonstrate laser operation with slope efficiencies of up to ~ 28%.

2021 ◽  
Vol 51 (1) ◽  
Author(s):  
Mamoona Khalid

A stable composition (against crystallization) of germanate glass doped with Yb3+ for mid-infrared laser applications is presented. Broad emission spectrum of Yb3+ was obtained for the fabricated glass. Laser operation was demonstrated in 13 mm long waveguide written in the glass using a femtosecond laser operating at 524 nm center wavelength sending 250 fs ultrashort pulses. The resulting CW laser operated at 1.04 µm in the fundamental mode of the waveguide. The propagation loss through the waveguide was 0.6 dB/cm at 1550 nm for 45 µm diameter of the modified structure. The mode analysis of the developed waveguide structure is also presented in COMSOL Multiphysics to study the electric field distribution through different modes of propagation in the waveguide and the confinement loss associated to them.


2007 ◽  
pp. 549-559 ◽  
Author(s):  
Salim I. Butrus ◽  
M. Farooq Ashraf ◽  
Dimitri T. Azar

2020 ◽  
Vol 117 (11) ◽  
pp. 111106
Author(s):  
Ryan C. Ng ◽  
Juan C. Garcia ◽  
Julia R. Greer ◽  
Katherine T. Fountaine

2020 ◽  
Vol 104 (2) ◽  
pp. 833-850 ◽  
Author(s):  
Pengfei Wang ◽  
Alson Kwun Leung Ng ◽  
Alastair Dowler ◽  
Heike Ebendorff‐Heidepriem

2006 ◽  
Vol 31 (10) ◽  
pp. 1555 ◽  
Author(s):  
F. Thibault ◽  
D. Pelenc ◽  
F. Druon ◽  
Y. Zaouter ◽  
M. Jacquemet ◽  
...  

2003 ◽  
Vol 797 ◽  
Author(s):  
J. Lægsgaard ◽  
S. E. Barkou Libori ◽  
K. Hougaard ◽  
J. Riishede ◽  
T. T. Larsen ◽  
...  

ABSTRACTThe dispersion, which expresses the variation with wavelength of the guided-mode group velocity, is one of the most important properties of optical fibers. Photonic crystal fibers (PCFs) offer much larger flexibility than conventional fibers with respect to tailoring of the dispersion curve. This is partly due to the large refractive-index contrast available in silica/air microstructures, and partly due to the possibility of making complex refractive-index structures over the fiber cross section. We discuss the fundamental physical mechanisms determining the dispersion properties of PCFs guiding by either total internal reflection or photonic bandgap effects, and use these insights to outline design principles and generic behaviours of various types of PCFs. A number of examples from recent modeling and experimental work serve to illustrate our general conclusions.


Sign in / Sign up

Export Citation Format

Share Document