scholarly journals Increased photocurrent in a tandem dye-sensitized solar cell by modifications in push–pull dye-design

2015 ◽  
Vol 51 (18) ◽  
pp. 3915-3918 ◽  
Author(s):  
C. J. Wood ◽  
G. H. Summers ◽  
E. A. Gibson

New donor–π–acceptor dyes functionalised with a bodipy or indolium acceptor are described, which have an excellent spectral response in the red region and generate record photocurrent in tandem dye-sensitized solar cells. Our cationic acceptor dye, CAD3, generated a cathodic photocurrent density of 8.2 mA cm−2, the highest reported for a NiO p-type solar cell to date.

2014 ◽  
Vol 2 (9) ◽  
pp. 2968-2976 ◽  
Author(s):  
Zhen Xu ◽  
Dehua Xiong ◽  
Huan Wang ◽  
Wenjun Zhang ◽  
Xianwei Zeng ◽  
...  

This work demonstrates CuGaO2 as an efficient alternative to NiO as a photocathode material in dye-sensitized solar cells. A remarkable photocurrent has been achieved by the CuGaO2 photocathode.


RSC Advances ◽  
2015 ◽  
Vol 5 (74) ◽  
pp. 60148-60151 ◽  
Author(s):  
Adèle Renaud ◽  
Laurent Cario ◽  
Yann Pellegrin ◽  
Errol Blart ◽  
Mohammed Boujtita ◽  
...  

Layered LaOCuS oxysulfide has been successfully implemented as a photocathode in p-type dye sensitized solar cells, as an alternative to NiO.


2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Sule Erten-Ela

Metal-free organic sensitizer consisting of donor, electron conducting, and anchoring anhydride groups was engineered at molecular level and synthesized. Dye sensitized solar cells based on conjugated naphthalene dye were fabricated using nanoporous electrode. Photoelectrodes with a 7 μm thick nanoporous layer and a 5 μm thick light-scattering layer were used to fabricate dye sensitized solar cells. DSSCs were fabricated in a FTO/nc-TiO2/organic dye/I-/I3-/Pt/FTO device geometry. Dye sensitized solar cell was characterized by current density-voltage (J-V) measurement. All current-voltage (I-V) measurements were done under 100 mW/cm2light intensity and AM 1.5 conditions. The photovoltaic data revealed a short circuit photocurrent density of 1.86 mA/cm2, an open circuit voltage of 430 mV, and a fill factor of 0.63, corresponding to an overall conversion efficiency of 0.53%.


2018 ◽  
Vol 6 (42) ◽  
pp. 11444-11456 ◽  
Author(s):  
Jonnadula Venkata Suman Krishna ◽  
Narra Vamsi Krishna ◽  
Towhid H. Chowdhury ◽  
Suryaprakash Singh ◽  
Idriss Bedja ◽  
...  

We have designed and synthesised four novel porphyrin sensitizers for dye-sensitized solar cell applications and shown power conversion efficiency of 10.5%.


2018 ◽  
Vol 47 (34) ◽  
pp. 11942-11952 ◽  
Author(s):  
Kitty Y. Chen ◽  
Phil A. Schauer ◽  
Brian O. Patrick ◽  
Curtis P. Berlinguette

Two sets of structurally analogous Co(iii/ii)-based redox mediators were incorporated in the dye-sensitized solar cells and a linear correlation was demonstrated between redox potential and photovoltage.


2015 ◽  
Vol 3 (12) ◽  
pp. 6383-6391 ◽  
Author(s):  
Jia-De Peng ◽  
Chuan-Pei Lee ◽  
D. Velayutham ◽  
V. Suryanarayanan ◽  
Kuo-Chuan Ho

A quasi-solid state dye-sensitized solar cell with the photoanode film of mesoporous TiO2spheres exhibited an efficiency of 6.18% and unfailing stability for 1200 h at 50 °C.


2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Md. Akhtaruzzaman ◽  
Ashraful Islam ◽  
Mohammad Rezaul Karim ◽  
A. K. Mahmud Hasan ◽  
Liyuan Han

Indoline dyeD-1was successfully applied as a cosensitizer for improving the spectral response of black dye in dye-sensitized solar cells (DSCs). It was observed thatD-1effectively increases the short-circuit photocurrent by offsetting the competitive light absorption byI/I3-electrolyte in the wavelength region 350–500 nm when adsorbed on the TiO2nanocrystaline films in a mix dye system. The DSCs containing theD-1and black dye achieved a power conversion efficiency of 9.80% with higher short-circuit photocurrent of 19.54 mA/cm2compared to the system of black dye without cosensitization under standard AM 1.5 sunlight.


2017 ◽  
Vol 41 (13) ◽  
pp. 5605-5612 ◽  
Author(s):  
Radhakrishnan Sivakumar ◽  
Rodrigo Recabarren ◽  
Sekar Ramkumar ◽  
Arumugam Manivel ◽  
Jans Alzate-Morales ◽  
...  

A new type of ruthenium sensitizers, S3 and S4, consisting of carbazole–diazafluorene based bipolar ancillary ligands have been synthesized and characterized for dye sensitized solar cells.


2017 ◽  
Vol 1 (6) ◽  
pp. 1059-1072 ◽  
Author(s):  
N. Prachumrak ◽  
T. Sudyoadsuk ◽  
A. Thangthong ◽  
P. Nalaoh ◽  
S. Jungsuttiwong ◽  
...  

Three new D–π–A dyes containing different numbers of triphenylamine donor substitutions on a π-linker were synthesized for dye-sensitized solar cells.


2015 ◽  
Vol 44 (33) ◽  
pp. 14697-14706 ◽  
Author(s):  
Tejaswi Jella ◽  
Malladi Srikanth ◽  
Rambabu Bolligarla ◽  
Yarasi Soujanya ◽  
Surya Prakash Singh ◽  
...  

Three new heteroleptic Ru(ii) polypyridyl complexes have been designed with a pyridine-benzimidazole functionalized ligand for dye-sensitized solar cells.


Sign in / Sign up

Export Citation Format

Share Document