scholarly journals High efficiency single-junction semitransparent perovskite solar cells

2014 ◽  
Vol 7 (9) ◽  
pp. 2968-2973 ◽  
Author(s):  
Cristina Roldán-Carmona ◽  
Olga Malinkiewicz ◽  
Rafael Betancur ◽  
Giulia Longo ◽  
Cristina Momblona ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Perovskite Solar Cells ◽  
Lead Iodide ◽  
Single Junction ◽  
Methylammonium Lead Iodide

Semitransparent efficient methylammonium lead iodide perovskite based solar cells.

Enhanced Grain Size and Crystallinity in CH3NH3PbI3 Perovskite Films by Metal Additives to the Single-Step Solution Fabrication Process

MRS Advances ◽  
2018 ◽  
Vol 3 (55) ◽  
pp. 3237-3242 ◽  
Author(s):  
Zahrah S. Almutawah ◽  
Suneth C. Watthage ◽  
Zhaoning Song ◽  
Ramez H. Ahangharnejhad ◽  
Kamala K. Subedi ◽  
...  
Keyword(s):  
Grain Size ◽  
Solar Cells ◽  
High Performance ◽  
High Efficiency ◽  
Perovskite Solar Cells ◽  
Precursor Solution ◽  
Single Step ◽  
Fabrication Process ◽  
Lead Iodide ◽  
Methylammonium Lead Iodide

ABSTRACTMethods of obtaining large grain size and high crystallinity in absorber materials play an important role in fabrication of high-performance methylammonium lead iodide (MAPbI3) perovskite solar cells. Here we study the effect of adding small concentrations of Cd2+, Zn2+, and Fe2+salts to the perovskite precursor solution used in the single-step solution fabrication process. Enhanced grain size and crystallinity in MAPbI3 films were obtained by using 0.1% of Cd2+ or Zn2+in the precursor solution. Consequently, solar cells constructed with Cd- and Zn-doped perovskite films show a significant improvement in device performance. These results suggest that the process may be an effective and facile method to fabricate high-efficiency perovskite photovoltaic devices.

scholarly journals Intermediate Phase‐Free Process for Methylammonium Lead Iodide Thin Film for High‐Efficiency Perovskite Solar Cells

2021 ◽  
pp. 2102492
Author(s):  
Yeonghun Yun ◽  
Devthade Vidyasagar ◽  
Minho Lee ◽  
Oh Yeong Gong ◽  
Jina Jung ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
High Efficiency ◽  
Intermediate Phase ◽  
Perovskite Solar Cells ◽  
Lead Iodide ◽  
Free Process ◽  
Methylammonium Lead Iodide

Interface studies by simulation on methylammonium lead iodide based planar perovskite solar cells for high efficiency

Solar Energy ◽  
2019 ◽  
Vol 190 ◽  
pp. 104-111 ◽  
Author(s):  
R. Jeyakumar ◽  
Atanu Bag ◽  
Reza Nekovei ◽  
R. Radhakrishnan
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Perovskite Solar Cells ◽  
Lead Iodide ◽  
Methylammonium Lead Iodide

scholarly journals The dynamics of methylammonium ions in hybrid organic–inorganic perovskite solar cells

2015 ◽  
Vol 6 (1) ◽  
Author(s):  
Aurelien M. A. Leguy ◽  
Jarvist Moore Frost ◽  
Andrew P. McMahon ◽  
Victoria Garcia Sakai ◽  
W. Kockelmann ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Time Window ◽  
Photovoltaic Performance ◽  
Perovskite Solar Cells ◽  
Lead Iodide ◽  
High Efficiency Solar Cells ◽  
Scattering Measurements ◽  
Quasielastic Neutron ◽  
Methylammonium Lead Iodide

Abstract Methylammonium lead iodide perovskite can make high-efficiency solar cells, which also show an unexplained photocurrent hysteresis dependent on the device-poling history. Here we report quasielastic neutron scattering measurements showing that dipolar CH3NH3 + ions reorientate between the faces, corners or edges of the pseudo-cubic lattice cages in CH3NH3PbI3 crystals with a room temperature residence time of ∼14 ps. Free rotation, π-flips and ionic diffusion are ruled out within a 1–200-ps time window. Monte Carlo simulations of interacting CH3NH3 + dipoles realigning within a 3D lattice suggest that the scattering measurements may be explained by the stabilization of CH3NH3 + in either antiferroelectric or ferroelectric domains. Collective realignment of CH3NH3 + to screen a device’s built-in potential could reduce photovoltaic performance. However, we estimate the timescale for a domain wall to traverse a typical device to be ∼0.1–1 ms, faster than most observed hysteresis.

scholarly journals Dimensional Optimization of TiO2 Nanodisk Photonic Crystals on Lead Iodide (MAPbI3) Perovskite Solar Cells by Using FDTD Simulations

2021 ◽  
Vol 12 (1) ◽  
pp. 351
Author(s):  
Lilik Hasanah ◽  
Adryan Ashidiq ◽  
Roer Eka Pawinanto ◽  
Budi Mulyanti ◽  
Chandra Wulandari ◽  
...  
Keyword(s):  
Solar Cells ◽  
Photonic Crystals ◽  
High Efficiency ◽  
Low Cost ◽  
Incident Light ◽  
Perovskite Solar Cells ◽  
Fdtd Simulation ◽  
Lead Iodide ◽  
Low Cost Manufacturing ◽  
Methylammonium Lead Iodide

Perovskite solar cells (PSC) are currently exhibiting reproducible high efficiency, low-cost manufacturing, and scalable electron transport layers (ETL), which are becoming increasingly important. The application of photonic crystals (PC) on solar cells has been proven to enhance light harvesting and lead solar cells to adjust the propagation and distribution of photons. In this paper, the optimization of a two-dimensional nanodisk PC introduced in ETL with an organic-inorganic lead-iodide perovskite (methylammonium lead-iodide, MAPbI3) as the absorber layer was studied. A finite-difference time-domain (FDTD) simulation was used to evaluate the optical performance of PSC with various lattice constants and a radius of nanodisk photonic crystals. According to the simulation, the optimum lattice constant and PC radius applied to ETL are 500 nm and 225 nm, respectively. This optimum design enhances PSC absorption performance by more than 94% of incident light.

Ferroelectric domains in methylammonium lead iodide perovskite solar cells

2018 ◽  
Author(s):  
Holger Röhm ◽  
Tobias Leonhard ◽  
Michael J. Hoffmann ◽  
Alexander Colsmann
Keyword(s):  
Solar Cells ◽  
Perovskite Solar Cells ◽  
Lead Iodide ◽  
Ferroelectric Domains ◽  
Methylammonium Lead Iodide

Improved stability of ambient air-processed methylammonium lead iodide using carbon nanotubes for perovskite solar cells

2021 ◽  
Vol 137 ◽  
pp. 111182 ◽  
Author(s):  
Mustafa K.A. Mohammed ◽  
Gabby Sarusi ◽  
P. Sakthivel ◽  
G. Ravi ◽  
Umer Younis
Keyword(s):  
Carbon Nanotubes ◽  
Solar Cells ◽  
Perovskite Solar Cells ◽  
Ambient Air ◽  
Lead Iodide ◽  
Improved Stability ◽  
Methylammonium Lead Iodide
Sign in / Sign up

Export Citation Format

Share Document