Ultrahigh-surface-area hierarchical porous carbon from chitosan: acetic acid mediated efficient synthesis and its application in superior supercapacitors

2017 ◽  
Vol 5 (47) ◽  
pp. 24775-24781 ◽  
Author(s):  
Jianyu Huang ◽  
Yeru Liang ◽  
Hang Hu ◽  
Simin Liu ◽  
Yijin Cai ◽  
...  
Keyword(s):  
Acetic Acid ◽  
Surface Area ◽  
Porous Carbon ◽  
Efficient Synthesis ◽  
Hierarchical Porous Carbon ◽  
Capacitive Properties ◽  
Hierarchical Porous

Acetic acid mediated efficient synthesis of ultrahigh-surface-area hierarchical porous carbon from chitosan with very attractive capacitive properties was reported.

scholarly journals Silkworm cocoon derived N, O-codoped hierarchical porous carbon with ultrahigh specific surface area for efficient capture of methylene blue with exceptionally high uptake: kinetics, isotherm, and thermodynamics

RSC Advances ◽  
2019 ◽  
Vol 9 (58) ◽  
pp. 33872-33882
Author(s):  
Genxing Zhu ◽  
Qi Liu ◽  
Fengyi Cao ◽  
Qi Qin ◽  
Mingli Jiao
Keyword(s):  
Methylene Blue ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Porous Carbon ◽  
Uptake Kinetics ◽  
High Uptake ◽  
Hierarchical Porous Carbon ◽  
Hierarchical Porous ◽  
Silkworm Cocoon

Silkworm cocoon derived N, O-HPC (SBET = 2270.19 m2 g−1) was synthesized, and demonstrated exceptionally high uptake of MB (2104.29 mg g−1).

Organic salt-derived nitrogen-rich, hierarchical porous carbon for ultrafast supercapacitors

2017 ◽  
Vol 41 (22) ◽  
pp. 13611-13618 ◽  
Author(s):  
Longfeng Hu ◽  
Li Ma ◽  
Qizhen Zhu ◽  
Lanyong Yu ◽  
Qi Wu ◽  
...  
Keyword(s):  
Surface Area ◽  
Porous Carbon ◽  
High Surface ◽  
High Surface Area ◽  
Rate Capability ◽  
Organic Salt ◽  
Porous Carbons ◽  
Hierarchical Porous Carbon ◽  
Hierarchical Porous ◽  
Hierarchical Porous Carbons

Nitrogen-rich, high surface area, hierarchical porous carbons were simply prepared by the pyrolysis of a nitrogen-containing organic salt, and exhibit excellent rate capability in supercapacitors.

scholarly journals Three-Dimensional Hierarchical Porous Carbon Derived from Natural Resources for Highly Efficient Treatment of Polluted Water

2021 ◽  
Author(s):  
Jiaxin Li ◽  
Rudolf Holze ◽  
Simbarashe Moyo ◽  
Song Wang ◽  
Sanxi Li ◽  
...  
Keyword(s):  
Specific Surface ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Surface Area ◽  
Specific Surface Area ◽  
Porous Carbon ◽  
Polluted Water ◽  
Hierarchical Porous Carbon ◽  
Hierarchical Porous

Abstract In this work, a series of three-dimensional (3D) porous carbon nanomaterial with large specific surface area and hierarchical pores were selectively prepared from biomass with varied properties obtained by tuning the carbonization temperature and activation agent. The optimized carbon sample (PC-500-6) exhibits a typical hierarchical porous structure with a high specific surface area (3203 m2/g) and pore size distribution in the range 0.8 to 3.0 nm, which shows excellent adsorption performance for methylene blue (MB) from an aqueous solution. The maximum adsorption capacity even reaches 917.43 mg/g, which is among one of the best results up to now. Through analysis of the adsorption data, it is found that the corresponding adsorption kinetic fits the pseudo-second-order model very well. The present results demonstrate that biomass-derived hierarchical porous carbon has a real potential application for wastewater treatment.Background:Dealing with the ever-increasing water pollution has become an urgent global problem, especially the organic containing polluted water. The physical adsorption has become one of the most popular ways for removal of organic dyes from wastewater due to its low cost as well as high efficiency. However, the adsorption performance is still limited by the low specific surface area (SSA) and unsuitable pore size. Hence, it is still a challenge to synthesize active carbon (AC) with high SSA, suitable pore size distribution as well as low cost for polluted water treatment. Here, we report an efficient method to prepare AC with large SSA from jujube for removal of MB in aqueous solution. The present results demonstrate that biomass-derived hierarchical porous carbon has a real potential application for wastewater treatment.Results:The as-prepared hierarchical porous structure carbon material (PC-500-6) shows a high specific surface area (3203 m2/g) and pore size distribution in the range 0.8 to 3.0 nm, while exhibits an enhanced adsorption performance for methylene blue (MB) from an aqueous solution. The maximum adsorption capacity even reaches 917.43 mg/g, which was calculated from Langmuir model. Through analysis of the adsorption data, it is found that the corresponding adsorption kinetic fits the pseudo-second-order model very well.Conclusions:It can be concluded that the adsorption of MB has a strong correlation with SSA, pore size distribution as well as the pore volume. The present study paved a practical way for wastewater treatment by using biomass-derived hierarchical porous carbon.

Synthesis of Se/chitosan-derived hierarchical porous carbon composite as Li–Se battery cathode

2017 ◽  
Vol 10 (02) ◽  
pp. 1650074 ◽  
Author(s):  
Cheng Chen ◽  
Chenhao Zhao ◽  
Zhibiao Hu ◽  
Kaiyu Liu
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Discharge Capacity ◽  
Porous Carbon ◽  
Carbon Composite ◽  
High Rate ◽  
Electrochemical Performances ◽  
Hierarchical Porous Carbon ◽  
Hierarchical Porous

The hierarchical porous carbon with overall macropores and surface micropores has been prepared from carbonization of chitosan/[Formula: see text][Formula: see text] gel-like composite. The specific surface area and pore volume of this carbon can come to 2358.9[Formula: see text][Formula: see text] g[Formula: see text] and 1.14[Formula: see text]cm3 g[Formula: see text], respectively, and the active component Se with amorphous structure is uniformly encapsulated into the microporous structure to form Se/carbon composite. As Li–Se battery cathode, the composite delivers a second discharge capacity of 537.6[Formula: see text]mAh g[Formula: see text] at 0.2[Formula: see text]C, and a discharge capacity of 517.9[Formula: see text]mA h g[Formula: see text] can be retained after 100 cycles. Even at a high rate of 5[Formula: see text]C, the composite still reveals a stable discharge capacity of 325.2[Formula: see text]mAh g[Formula: see text]. The excellent electrochemical performances of Se/carbon composite may attribute to high specific surface area and hierarchical porous feature.

The simple preparation of a hierarchical porous carbon with high surface area for high performance supercapacitors

Carbon ◽  
2013 ◽  
Vol 60 ◽  
pp. 565
Author(s):  
Dong-fang Zheng ◽  
Meng-qiu Jia ◽  
Bin Xu ◽  
Hao Zhang ◽  
Gao-ping Cao ◽  
...  
Keyword(s):  
Surface Area ◽  
Porous Carbon ◽  
High Performance ◽  
High Surface ◽  
High Surface Area ◽  
Hierarchical Porous Carbon ◽  
Simple Preparation ◽  
Hierarchical Porous

Synthesis of biomass-derived N,O-codoped hierarchical porous carbon with large surface area for high-performance supercapacitor

2021 ◽  
Vol 44 ◽  
pp. 103286
Author(s):  
Tao Feng ◽  
Shunrui Wang ◽  
Yingnan Hua ◽  
Peng Zhou ◽  
Gang Liu ◽  
...  
Keyword(s):  
Surface Area ◽  
Porous Carbon ◽  
High Performance ◽  
Large Surface Area ◽  
Hierarchical Porous Carbon ◽  
Hierarchical Porous
Sign in / Sign up

Export Citation Format

Share Document