Exploring novel bismuth-based materials for energy storage applications

2018 ◽  
Vol 6 (30) ◽  
pp. 7976-7981 ◽  
Author(s):  
Feng Li ◽  
Tao Jiang ◽  
Jiwei Zhai ◽  
Bo Shen ◽  
Huarong Zeng
Keyword(s):  
Energy Storage ◽  
Energy Storage Density ◽  
Ultrahigh Energy ◽  
Storage Density ◽  
Fast Discharge ◽  
Energy Storage Applications

A novel bismuth-based material of hot-pressed (Bi0.5K0.5)TiO3–0.06La(Mg0.5Ti0.5)O3 ceramic with an ultrahigh energy storage density and fast discharge speed.

Fine-grain induced outstanding energy storage performance in novel Bi0.5K0.5TiO3–Ba(Mg1/3Nb2/3)O3 ceramics via a hot-pressing strategy

2019 ◽  
Vol 7 (39) ◽  
pp. 12127-12138 ◽  
Author(s):  
Feng Li ◽  
Xu Hou ◽  
Tianyu Li ◽  
Renjun Si ◽  
Chunchang Wang ◽  
...  
Keyword(s):  
Energy Storage ◽  
Hot Pressing ◽  
Energy Storage Density ◽  
Ultrahigh Energy ◽  
Storage Density ◽  
Storage Performance ◽  
Fine Grain ◽  
Fast Discharge

Fine-grain induced ultrahigh energy storage density and fast discharge speed in novel Bi0.5K0.5TiO3–Ba(Mg1/3Nb2/3)O3 ceramics via a hot-pressing strategy.

Excellent energy storage density and charge–discharge performance of a novel Bi0.2Sr0.7TiO3–BiFeO3 thin film

2019 ◽  
Vol 7 (35) ◽  
pp. 10891-10900 ◽  
Author(s):  
Baijie Song ◽  
Shuanghao Wu ◽  
Feng Li ◽  
Pan Chen ◽  
Bo Shen ◽  
...  
Keyword(s):  
Thin Film ◽  
Energy Storage ◽  
Spin Coating ◽  
Sol Gel ◽  
Energy Storage Density ◽  
Ultrahigh Energy ◽  
Discharge Performance ◽  
Storage Density ◽  
Good Thermal Stability ◽  
Charge Discharge

A novel Bi0.2Sr0.7TiO3–BiFeO3 thin film prepared by sol–gel/spin coating possesses ultrahigh energy storage density, good thermal stability and excellent charge–discharge performance.

Ultrahigh energy storage and electrocaloric performance achieved in SrTiO3 amorphous thin films via polar cluster engineering

2019 ◽  
Vol 7 (30) ◽  
pp. 17797-17805 ◽  
Author(s):  
Yulei Zhang ◽  
Weili Li ◽  
Zhenyu Wang ◽  
Yulong Qiao ◽  
Yang Yu ◽  
...  
Keyword(s):  
Thin Films ◽  
Energy Storage ◽  
High Energy ◽  
Energy Storage Density ◽  
Ultrahigh Energy ◽  
Storage Density ◽  
Amorphous Thin Films ◽  
Polar Cluster ◽  
High Energy Storage Density ◽  
High Energy Storage

High energy storage density and a reversible electrocaloric effect are simultaneously achieved in Sr0.995(Na0.5Bi0.5)0.005(Ti0.99Mn0.01)O3 amorphous thin films via polar cluster engineering.

BiFeO3–SrTiO3 thin film as a new lead-free relaxor-ferroelectric capacitor with ultrahigh energy storage performance

2017 ◽  
Vol 5 (12) ◽  
pp. 5920-5926 ◽  
Author(s):  
Hao Pan ◽  
Yi Zeng ◽  
Yang Shen ◽  
Yuan-Hua Lin ◽  
Jing Ma ◽  
...  
Keyword(s):  
Energy Storage ◽  
Relaxor Ferroelectric ◽  
Lead Free ◽  
Dielectric Films ◽  
Energy Storage Density ◽  
Ultrahigh Energy ◽  
Storage Density ◽  
Ferroelectric Capacitor ◽  
Storage Performance ◽  
Thermal Stability Of

We report ultrahigh energy storage density of 51 J cm−3 and good fatigue & thermal stability of BiFeO3-based lead-free dielectric films.

Characterization and Energy Storage Density of BaTiO3 - Ba(Mg1/3Nb2/3)O3 Ceramics

2010 ◽  
Vol 654-656 ◽  
pp. 2045-2048 ◽  
Author(s):  
Yi Qiu Li ◽  
Han Xing Liu ◽  
Zhong Hua Yao ◽  
Jing Xu ◽  
Yun Jiang Cui ◽  
...  
Keyword(s):  
Energy Storage ◽  
Room Temperature ◽  
Breakdown Strength ◽  
Sintering Temperature ◽  
Hysteresis Loops ◽  
Energy Storage Density ◽  
Storage Density ◽  
Two Factors ◽  
Energy Storage Applications ◽  
Scanning Electron

The energy storage density of (1-x) BaTiO3 – x Ba(Mg1/3Nb2/3)O3 (x = 0, 0.1, 0.2, 0.3) ceramics was investigated. The microstructure of samples was characterized by scanning electron microscopy (SEM). The energy storage density was calculated from the P-E hysteresis loops measured at room temperature. Experimental results show that the energy storage density of 0.9 BaTiO3 – 0.1 Ba(Mg1/3Nb2/3)O3 ceramics is highest among all compositions. At 15.8kV/mm electric field, the energy storage density of the sample can reach up to 1.07J/cm3, which is about 1.5 times higher than pure BaTiO3. The improvement of the energy density can be due to two factors: one is the improved breakdown strength caused by the optimized microstructure, the other is the decreased remnant polarization. This result indicates that bulk 0.9 BaTiO3 – 0.1 Ba(Mg1/3Nb2/3)O3 ceramic has advantages compared with pure BaTiO3 ceramic for energy storage applications, and with further improvements in microstructure and reduction of sintering temperature, could be a good candidate for energy storage capacitors.

scholarly journals Ultrahigh energy storage density in epitaxial AlN/ScN superlattices

2021 ◽  
Vol 5 (7) ◽  
Author(s):  
Zhijun Jiang ◽  
Bin Xu ◽  
Hongjun Xiang ◽  
L. Bellaiche
Keyword(s):  
Energy Storage ◽  
Energy Storage Density ◽  
Ultrahigh Energy ◽  
Storage Density

scholarly journals Metal Ti quantum chain-inlaid 2D NaSn2(PO4)3/H-doped hard carbon hybrid electrodes with ultrahigh energy storage density

2021 ◽  
Vol 403 ◽  
pp. 126311
Author(s):  
Wen He ◽  
Changjiu Li ◽  
Beibei Zhao ◽  
Xudong Zhang ◽  
Kwan San Hui ◽  
...  
Keyword(s):  
Energy Storage ◽  
Energy Storage Density ◽  
Ultrahigh Energy ◽  
Hard Carbon ◽  
Storage Density ◽  
Quantum Chain
Sign in / Sign up

Export Citation Format

Share Document