An advanced and highly efficient Ce assisted NiFe-LDH electrocatalyst for overall water splitting

2020 ◽  
Vol 4 (1) ◽  
pp. 312-323 ◽  
Author(s):  
Harsharaj S. Jadhav ◽  
Animesh Roy ◽  
Bezawit Z. Desalegan ◽  
Jeong Gil Seo

A room-temperature synthesized NiFeCe2 electrocatalyst delivered a current density of 10 mA cm−2 at a cell voltage of 1.59 V when used as the electrolyzer.

2021 ◽  
Author(s):  
Nannan Chen ◽  
Yanhong Wang ◽  
Xiaoqiang Du ◽  
Xiaoshuang Zhang

The results demonstrate that Cu–Ni–S/NF//Cu–Ni–P/NF pairs show superior water splitting performance with only requiring a cell voltage of 1.50 V to achieve a current density of 20 mA cm−2.


2017 ◽  
Vol 5 (19) ◽  
pp. 9377-9390 ◽  
Author(s):  
Tingting Liu ◽  
Mian Li ◽  
Chuanlai Jiao ◽  
Mehboob Hassan ◽  
Xiangjie Bo ◽  
...  

A (−) Ni3N/CMFs/Ni3N‖Ni3N/CMFs/Ni3N (+) electrolysis cell requires a cell voltage of only 1.65 V to achieve a current density of 20 mA cm−2.


2018 ◽  
Vol 42 (22) ◽  
pp. 18201-18207 ◽  
Author(s):  
Xiaoqiang Du ◽  
Qibin Wang ◽  
Xiaoshuang Zhang

NiO/Ni3S2 affords a current density of 10 mA cm−2 in 1.0 M KOH at a cell voltage of 1.59 V, i.e., comparable to the commercial 20 wt% IrO2/C–40 wt% Pt/C couple (1.55 V at 10 mA cm−2).


2019 ◽  
Vol 7 (20) ◽  
pp. 12440-12445 ◽  
Author(s):  
Weiju Hao ◽  
Renbing Wu ◽  
Hongyuan Yang ◽  
Yanhui Guo

An overall water splitting device assembled using a photothermal effect coupled Ni–W–B/carbon cloth electrode could deliver a current density of 25 mA cm−2 at an ultralow cell voltage of 1.524 V without heating the whole system, which is comparable to its performance at an elevated cell temperature of 50 °C.


2018 ◽  
Vol 47 (30) ◽  
pp. 10273-10280 ◽  
Author(s):  
Xiaoqiang Du ◽  
Qibin Wang ◽  
Yu Li ◽  
Xiaoshuang Zhang

NiCo2O4/Ni3S2 affords a current density of 10 mA cm−2 in 1.0 M KOH at a cell voltage of 1.58 V, i.e., comparable to that of the commercial 20 wt% IrO2/C–40 wt% Pt/C couple (1.52 V at 10 mA cm−2).


2018 ◽  
Vol 54 (19) ◽  
pp. 2393-2396 ◽  
Author(s):  
Bing Chang ◽  
Shuai Hao ◽  
Zhixiang Ye ◽  
Yingchun Yang

An amorphous Ni–P alloy shell electrodeposited on a CuO nanowire array to synergistically boost the catalytic activity toward alkaline water splitting is reported, and this core@shell CuO@Ni–P nanowire array is durable with a cell voltage of only 1.71 V reaching a current density of 30 mA cm−2 using a two-electrode configuration in an alkaline water electrolyzer.


2019 ◽  
Vol 7 (19) ◽  
pp. 12325-12332 ◽  
Author(s):  
Xiuming Bu ◽  
Renjie Wei ◽  
Wei Gao ◽  
Changyong Lan ◽  
Johnny C. Ho

A unique sandwich structure of CoMnP/Ni2P/NiFe is successfully achieved by introducing a Ni2P interlayer between CoMnP nanosheets and NiFe foam to achieve an excellent bifunctional electrocatalyst, yielding a low cell voltage of only 1.48 V at 10 mA cm−2 for overall water splitting in alkaline media.


Nanoscale ◽  
2020 ◽  
Vol 12 (13) ◽  
pp. 7116-7123 ◽  
Author(s):  
Wei Chen ◽  
Guangfu Qian ◽  
Qinglian Xu ◽  
Chen Yu ◽  
Mengya Yu ◽  
...  

In this work, binary metal oxide porous nanorods are synthesized and exhibit evidently small overpotentials for OER and HER. They also display remarkable stability by holding a current density of ±200 mA cm−2 for 85 h for OER/HER.


2021 ◽  
Vol 9 (15) ◽  
pp. 9753-9760
Author(s):  
Jin Wu ◽  
Renjie Xie ◽  
Xiangchen Hu ◽  
Zhiwei Nie ◽  
Yanuo Shi ◽  
...  

The as-prepared amorphous Fe-doped CoWO4 bifunctional electrocatalyst shows a low overpotential of 259 and 118 mV to reach a current density of 10 mA cm−2 for the OER and HER in 1 M KOH, respectively.


Sign in / Sign up

Export Citation Format

Share Document