A self-supported amorphous Ni–P alloy on a CuO nanowire array: an efficient 3D electrode catalyst for water splitting in alkaline media

2018 ◽  
Vol 54 (19) ◽  
pp. 2393-2396 ◽  
Author(s):  
Bing Chang ◽  
Shuai Hao ◽  
Zhixiang Ye ◽  
Yingchun Yang
Keyword(s):  
Water Splitting ◽  
Nanowire Array ◽  
Cell Voltage ◽  
Alkaline Media ◽  
Core Shell ◽  
Alkaline Water ◽  
A Cell ◽  
Cuo Nanowire ◽  
A Current ◽  
3D Electrode

An amorphous Ni–P alloy shell electrodeposited on a CuO nanowire array to synergistically boost the catalytic activity toward alkaline water splitting is reported, and this core@shell CuO@Ni–P nanowire array is durable with a cell voltage of only 1.71 V reaching a current density of 30 mA cm−2 using a two-electrode configuration in an alkaline water electrolyzer.

Enhancement of alkaline water splitting activity by Co–P coating on a copper oxide nanowire

2019 ◽  
Vol 48 (3) ◽  
pp. 891-897 ◽  
Author(s):  
Bing Chang ◽  
Yingchun Yang ◽  
Zhixiang Ye ◽  
Shengyu Liu
Keyword(s):  
Catalytic Activity ◽  
Copper Oxide ◽  
Water Splitting ◽  
Nanowire Array ◽  
Cell Voltage ◽  
Electrode Configuration ◽  
Alkaline Water ◽  
A Cell ◽  
Cuo Nanowire

An amorphous Co–P shell coating on a copper oxide nanowire array to synergistically boost the catalytic activity toward alkaline water splitting, and this shell/core Co–P/CuO nanowire array is durable with a cell voltage of only 1.645 V to reach 20 mA cm−2 by a two-electrode configuration in an alkaline water electrolyzer.

An advanced and highly efficient Ce assisted NiFe-LDH electrocatalyst for overall water splitting

2020 ◽  
Vol 4 (1) ◽  
pp. 312-323 ◽  
Author(s):  
Harsharaj S. Jadhav ◽  
Animesh Roy ◽  
Bezawit Z. Desalegan ◽  
Jeong Gil Seo
Keyword(s):  
Water Splitting ◽  
Current Density ◽  
Room Temperature ◽  
Cell Voltage ◽  
Highly Efficient ◽  
Overall Water Splitting ◽  
A Cell ◽  
A Current

A room-temperature synthesized NiFeCe2 electrocatalyst delivered a current density of 10 mA cm−2 at a cell voltage of 1.59 V when used as the electrolyzer.

Controllable synthesis of Cu–Ni–M (M = S, P and Se) hybrid nanoarrays for efficient water splitting reaction

2021 ◽  
Author(s):  
Nannan Chen ◽  
Yanhong Wang ◽  
Xiaoqiang Du ◽  
Xiaoshuang Zhang
Keyword(s):  
Water Splitting ◽  
Current Density ◽  
Cell Voltage ◽  
Controllable Synthesis ◽  
A Cell ◽  
A Current

The results demonstrate that Cu–Ni–S/NF//Cu–Ni–P/NF pairs show superior water splitting performance with only requiring a cell voltage of 1.50 V to achieve a current density of 20 mA cm−2.

Design and synthesis of integrally structured Ni3N nanosheets/carbon microfibers/Ni3N nanosheets for efficient full water splitting catalysis

2017 ◽  
Vol 5 (19) ◽  
pp. 9377-9390 ◽  
Author(s):  
Tingting Liu ◽  
Mian Li ◽  
Chuanlai Jiao ◽  
Mehboob Hassan ◽  
Xiangjie Bo ◽  
...  
Keyword(s):  
Water Splitting ◽  
Current Density ◽  
Cell Voltage ◽  
Electrolysis Cell ◽  
Design And Synthesis ◽  
A Cell ◽  
Carbon Microfibers ◽  
A Current

A (−) Ni3N/CMFs/Ni3N‖Ni3N/CMFs/Ni3N (+) electrolysis cell requires a cell voltage of only 1.65 V to achieve a current density of 20 mA cm−2.

Controllable synthesis of NiO/Ni3S2 hybrid arrays as efficient electrocatalysts for water splitting

2018 ◽  
Vol 42 (22) ◽  
pp. 18201-18207 ◽  
Author(s):  
Xiaoqiang Du ◽  
Qibin Wang ◽  
Xiaoshuang Zhang
Keyword(s):  
Water Splitting ◽  
Current Density ◽  
Cell Voltage ◽  
Controllable Synthesis ◽  
A Cell ◽  
A Current

NiO/Ni3S2 affords a current density of 10 mA cm−2 in 1.0 M KOH at a cell voltage of 1.59 V, i.e., comparable to the commercial 20 wt% IrO2/C–40 wt% Pt/C couple (1.55 V at 10 mA cm−2).

Interfacial Engineering for Design of Novel 2D Cobalt Sulfide-Mxene Heterostructured Catalyst Towards Alkaline Water Splitting

2021 ◽  
Author(s):  
Phan Khanh Linh Tran ◽  
Min Sung Kim ◽  
Thanh Hai Nguyen ◽  
Thanh D Tran ◽  
Nam Hoon Kim ◽  
...  
Keyword(s):  
Water Splitting ◽  
Three Dimensional ◽  
Cell Voltage ◽  
Catalytic Performance ◽  
Cobalt Sulfide ◽  
Current Response ◽  
Interfacial Engineering ◽  
A Cell ◽  
Kinetics Of ◽  
A Current

Abstract In this work, we used an interfacial engineering method to investigate a novel hybrid of two-dimensional cobalt sulfide-Mxene (2D CoS-Mo2TiC2) heterostructure supported by a three-dimensional foam substrate. The modification electronic properties caused by unique interfacial interactions resulted in a significant increase in the number of electroactive sites and charge transfer ability, thereby accelerating kinetics of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in an alkaline medium. The catalyst required overpotential of 248.2 and 310 mV at a current response of 50 mA cm-2 for HER and OER, respectively, along with a remarkable stability. In addition, a two-electrode electrolyzer derived from the developed 2D CoS-Mo2TiC2 catalyst showed a cell voltage of 1.74 V at 10 mA cm-2 and a good stability during 25 h continuous operation. The achieved results were associated to the formation of a unique interfacial heterostructure with the strong interaction between two material phases, which effectively modified electronic structure and surface chemistry, thereby leading to the enhancement of catalytic performance. The study offered a potential route to synthesize new catalyst for green hydrogen production via water splitting.

Oxide/sulfide-based hybrid arrays as robust electrocatalysts for water splitting

2018 ◽  
Vol 47 (30) ◽  
pp. 10273-10280 ◽  
Author(s):  
Xiaoqiang Du ◽  
Qibin Wang ◽  
Yu Li ◽  
Xiaoshuang Zhang
Keyword(s):  
Water Splitting ◽  
Current Density ◽  
Cell Voltage ◽  
A Cell ◽  
A Current

NiCo2O4/Ni3S2 affords a current density of 10 mA cm−2 in 1.0 M KOH at a cell voltage of 1.58 V, i.e., comparable to that of the commercial 20 wt% IrO2/C–40 wt% Pt/C couple (1.52 V at 10 mA cm−2).

scholarly journals Electrodeposition of Pt-Decorated Ni(OH)2/CeO2 Hybrid as Superior Bifunctional Electrocatalyst for Water Splitting

Research ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Huanhuan Liu ◽  
Zhenhua Yan ◽  
Xiang Chen ◽  
Jinhan Li ◽  
Le Zhang ◽  
...  
Keyword(s):  
Water Splitting ◽  
Cell Voltage ◽  
Water Electrolysis ◽  
Active Species ◽  
Water Dissociation ◽  
Electronic Interaction ◽  
Bifunctional Electrocatalyst ◽  
Highly Active ◽  
A Cell ◽  
Promising Application

The facile synthesis of highly active and stable bifunctional electrocatalysts to catalyze water splitting is attractive but challenging. Herein, we report the electrodeposition of Pt-decorated Ni(OH)2/CeO2 (PNC) hybrid as an efficient and robust bifunctional electrocatalyst. The graphite-supported PNC catalyst delivers superior hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activities over the benchmark Pt/C and RuO2, respectively. For overall water electrolysis, the PNC hybrid only requires a cell voltage of 1.45 V at 10 mA cm−2 and sustains over 85 h at 1000 mA cm−2. The remarkable HER/OER performances are attributed to the superhydrophilicity and multiple effects of PNC, in which Ni(OH)2 and CeO2 accelerate HER on Pt due to promoted water dissociation and strong electronic interaction, while the electron-pulling Ce cations facilitate the generation of high-valence Ni OER-active species. These results suggest the promising application of PNC for H2 production from water electrolysis.

Silicon nanowire array/Cu2O crystalline core–shell nanosystem for solar-driven photocatalytic water splitting

2013 ◽  
Vol 24 (26) ◽  
pp. 265402 ◽  
Author(s):  
Zuzhou Xiong ◽  
Maojun Zheng ◽  
Sida Liu ◽  
Li Ma ◽  
Wenzhong Shen
Keyword(s):  
Water Splitting ◽  
Silicon Nanowire ◽  
Nanowire Array ◽  
Core Shell ◽  
Photocatalytic Water Splitting ◽  
Silicon Nanowire Array ◽  
Crystalline Core
Sign in / Sign up

Export Citation Format

Share Document