Electron optics and space charge in simple emission systems with circular symmetry

Author(s):  
O. Klemperer ◽  
B.J. Mayo
1995 ◽  
Author(s):  
John A. Rouse ◽  
Xieqing Zhu ◽  
Eric Munro

1996 ◽  
Vol 423 ◽  
Author(s):  
C. W. Hatfield ◽  
G. L. Bilbro ◽  
A. S. Morris ◽  
P. K. Baumann ◽  
B. L. Ward ◽  
...  

AbstractThe properties and characteristics of vacuum microtriodes based on NEA diamond surfaces were modelled. Specifically, an NEA diamond vacuum microtriode array was investigated using electrical measurements, electron optics software, and microwave circuit simulation. Data for emission current versus applied voltage for various anode-to-cathode distances for diamond NEA surfaces was analyzed and various parameters were extracted. Electron optics software was used to determine Fowler-Nordheim and space-charge-limited DC I-V characteristics for each microtriode. Microwave circuit simulation was done to determine the behavior of arrays of these vacuum microtriodes in an RF amplifier circuit.


1955 ◽  
Vol 26 (3) ◽  
pp. 327-330 ◽  
Author(s):  
E. A. Ash

Author(s):  
Godfrey C. Hoskins

The first serious electron microscooic studies of chromosomes accompanied by pictures were by I. Elvers in 1941 and 1943. His prodigious study, from the manufacture of micronets to the development of procedures for interpreting electron micrographs has gone all but unnoticed. The application of todays sophisticated equipment confirms many of the findings he gleaned from interpretation of images distorted by the electron optics of that time. In his figure 18 he notes periodic arrangement of pepsin sensitive “prickles” now called secondary fibers. In his figure 66 precise regularity of arrangement of these fibers can be seen. In his figure 22 he reproduces Siegbahn's first stereoscopic electron micrograph of chromosomes.The two stereoscopic pairs of electron micrographs of a human chromosome presented here were taken with a metallurgical stage on a Phillips EM200. These views are interpreted as providing photographic evidence that primary fibers (1°F) about 1,200Å thick are surrounded by secondary fibers (2°F) arranged in regular intervals of about 2,800Å in this metanhase human chromosome. At the telomere the primary fibers bend back on themselves and entwine through the center of each of each chromatid. The secondary fibers are seen to continue to surround primary fibers at telomeres. Thus at telomeres, secondary fibers present a surface not unlike that of the side of the chromosome, and no more susceptible to the addition of broken elements from other chromosomes.


Author(s):  
William J. Baxter

In this form of electron microscopy, photoelectrons emitted from a metal by ultraviolet radiation are accelerated and imaged onto a fluorescent screen by conventional electron optics. image contrast is determined by spatial variations in the intensity of the photoemission. The dominant source of contrast is due to changes in the photoelectric work function, between surfaces of different crystalline orientation, or different chemical composition. Topographical variations produce a relatively weak contrast due to shadowing and edge effects.Since the photoelectrons originate from the surface layers (e.g. ∼5-10 nm for metals), photoelectron microscopy is surface sensitive. Thus to see the microstructure of a metal the thin layer (∼3 nm) of surface oxide must be removed, either by ion bombardment or by thermal decomposition in the vacuum of the microscope.


Author(s):  
R. H. Geiss

The theory and practical limitations of micro area scanning transmission electron diffraction (MASTED) will be presented. It has been demonstrated that MASTED patterns of metallic thin films from areas as small as 30 Åin diameter may be obtained with the standard STEM unit available for the Philips 301 TEM. The key to the successful application of MASTED to very small area diffraction is the proper use of the electron optics of the STEM unit. First the objective lens current must be adjusted such that the image of the C2 aperture is quasi-stationary under the action of the rocking beam (obtained with 40-80-160 SEM settings of the P301). Second, the sample must be elevated to coincide with the C2 aperture image and its image also be quasi-stationary. This sample height adjustment must be entirely mechanical after the objective lens current has been fixed in the first step.


Sign in / Sign up

Export Citation Format

Share Document