High Frequency MOSFET Gate Drivers: Technologies and Applications

2017 ◽  
Keyword(s):  
2021 ◽  
Author(s):  
Jahangir Afsharian

This thesis is devoted to the development of a novel parallel isolated power supply (PIPS) for the gate driver of integrated Gate Commutated Thyristors (GCT). The proposed PIPS is essentially a special high frequency soft switched DC/DC converter, integrating six parallel isolated power supplies in one module where each power supply generates a regulated dc supply for the GCT gate driver. In commercial GCT power supplies, a high-voltage isolation transformer is indispensable but highly inefficient in terms of cost and size, which can be significantly improved by the optimized transformer. In all, this design strives to achieve a general power supply for powering up the gate drivers of all types of GCT devices in all MV applications with minimal changes in configuration. In this thesis, the configuration of PIPS is presented and its operating principle is elaborated. The transformer optimization procedure satisfying the voltage isolation requirement of GCT gate drivers is extensively discussed. The performance of PIPS, including the front end DC/DC converter, zero voltage switching phase-shift full bridge (ZVS-PS-FB) converter, and the optimization of the transformer, is verified by simulations and experiments where a 360W laboratory prototype is built for the experimental use.


2021 ◽  
Author(s):  
Jahangir Afsharian

This thesis is devoted to the development of a novel parallel isolated power supply (PIPS) for the gate driver of integrated Gate Commutated Thyristors (GCT). The proposed PIPS is essentially a special high frequency soft switched DC/DC converter, integrating six parallel isolated power supplies in one module where each power supply generates a regulated dc supply for the GCT gate driver. In commercial GCT power supplies, a high-voltage isolation transformer is indispensable but highly inefficient in terms of cost and size, which can be significantly improved by the optimized transformer. In all, this design strives to achieve a general power supply for powering up the gate drivers of all types of GCT devices in all MV applications with minimal changes in configuration. In this thesis, the configuration of PIPS is presented and its operating principle is elaborated. The transformer optimization procedure satisfying the voltage isolation requirement of GCT gate drivers is extensively discussed. The performance of PIPS, including the front end DC/DC converter, zero voltage switching phase-shift full bridge (ZVS-PS-FB) converter, and the optimization of the transformer, is verified by simulations and experiments where a 360W laboratory prototype is built for the experimental use.


Author(s):  
W. E. Lee ◽  
A. H. Heuer

IntroductionTraditional steatite ceramics, made by firing (vitrifying) hydrous magnesium silicate, have long been used as insulators for high frequency applications due to their excellent mechanical and electrical properties. Early x-ray and optical analysis of steatites showed that they were composed largely of protoenstatite (MgSiO3) in a glassy matrix. Recent studies of enstatite-containing glass ceramics have revived interest in the polymorphism of enstatite. Three polymorphs exist, two with orthorhombic and one with monoclinic symmetry (ortho, proto and clino enstatite, respectively). Steatite ceramics are of particular interest a they contain the normally unstable high-temperature polymorph, protoenstatite.Experimental3mm diameter discs cut from steatite rods (∼10” long and 0.5” dia.) were ground, polished, dimpled, and ion-thinned to electron transparency using 6KV Argon ions at a beam current of 1 x 10-3 A and a 12° angle of incidence. The discs were coated with carbon prior to TEM examination to minimize charging effects.


Sign in / Sign up

Export Citation Format

Share Document