scholarly journals Designs of PCM based heat exchangers constructions for thermal energy storage tanks – examples and case study for selected design

2018 ◽  
Vol 70 ◽  
pp. 01010
Author(s):  
Marta Kuta ◽  
Dominika Matuszewska ◽  
Tadeusz Michał Wójcik
Keyword(s):  
Energy Storage ◽  
Heat Exchanger ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
New Technologies ◽  
Tube Heat Exchanger ◽  
Change Material

Increasing energy consumption in residential and public buildings requires development of new technologies for thermal energy production and storage. One of possibilities for the second listed need is the use of phase change materials (PCMs). This work is focused on solutions in this area and consists of two parts. First one is focused on different designs of thermal energy storage (TES) tanks based on the phase change materials. The second part is the analysis of tests results for TES tank containing shelf and tube heat exchanger and filled with phase change material. Thermal energy storage tank is analyzed in order to use it in domestic heating and hot utility water installations. The aim of this research was to check the applicability of phase change material for mentioned purpose. Results show that using phase change materials for thermal energy storage can increase amount of stored heat. The use of properly selected PCM and heat exchanger enables the process of thermal energy storing and releasing to become more efficient.

Dissipative particle dynamics study of nano-encapsulated thermal energy storage phase change material

RSC Advances ◽  
2014 ◽  
Vol 4 (74) ◽  
pp. 39552-39557 ◽  
Author(s):  
Zhonghao Rao ◽  
Xinyu You ◽  
Yutao Huo ◽  
Xinjian Liu
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Thermophysical Properties ◽  
Phase Change Materials ◽  
Dissipative Particle Dynamics ◽  
Particle Dynamics ◽  
Change Material

The nano-encapsulated phase change materials (PCM), which have several good thermophysical properties, were proposed as potential for thermal energy storage.

scholarly journals A thermal energy storage composite by incorporating microencapsulated phase change material into wood

RSC Advances ◽  
2020 ◽  
Vol 10 (14) ◽  
pp. 8097-8103 ◽  
Author(s):  
Wenbin Wang ◽  
Huimin Cao ◽  
Jingyi Liu ◽  
Shifang Jia ◽  
Lin Ma ◽  
...  
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Microencapsulated Phase Change Material ◽  
Microencapsulated Phase Change Materials ◽  
The Matrix ◽  
Change Material

Phase change energy storage wood (PCESW) was prepared by using microencapsulated phase change materials (MicroPCM) as thermal energy storage (TES) materials and wood as the matrix.

Review on Phase Change Material Slurries

2013 ◽  
Vol 860-863 ◽  
pp. 946-951
Author(s):  
Jie Chen ◽  
Feng Jiao Liu ◽  
Yi Fei Zheng
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Apparent Specific Heat ◽  
Heat Transfer Capacity ◽  
Change Material ◽  
Better Than

Phase change materials (PCM) have recently received considerable attention in the field of thermal energy storage, due to their intrinsic properties. Phase change material slurry is a novel medium of heat storage and transfer, its apparent specific heat and heat transfer capacity is better than water.PCM slurries are being investigated for active thermal energy storage or as alternatives to conventional single phase fluids because they are pumpable and have advanced heat transport performance with phase change. This review mainly presents the information on PCM emulsions and microencapsulated PCM slurries (mPCM slurries).

Experimental Investigation on a PCM Based Thermal Energy Storage System for a VCR System

2021 ◽  
Vol 106 ◽  
pp. 116-120
Author(s):  
Shaik Riyaz Basha
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Cycle Time ◽  
Phase Change Materials ◽  
Storage Capacity ◽  
Food Storage ◽  
Change Material

Thermal energy storage (TES) based on hidden heat concept is good substitute for sensible heat storage because of its dense storage capacity and almost constant temperature heat transfers during the charging and discharging cycle. During no load and low cooling load conditions the system stores the thermal energy in the storage medium (phase change material) which will be used latter to meet the requirement in off cycle conditions. The intention of present work is to increase the system off cycle time, maintain required temperatures during power cuts by joining a few inch thick layer of phase change material on the outer surface of the evaporator. For investigation purpose a deep freezer which runs on vapor compression system of 50 liters storage capacity is fabricated with and without phase change materials. The eutectic compositions nearly 23 wt% salt (NaCl) dissolved in water and aluminium nitrate around 26 wt% dissolved in water are used as phase change materials. By the end of all experimental investigations it was noticed that the off cycle time system with phase change material is increased by 5.5 hours compared to system without phase change material, food storage time is enhanced by 8 to 14 hrs and a little power saving also achieved.

scholarly journals Cryogenic conditioning of microencapsulated phase change material for thermal energy storage

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
G. V. N. Trivedi ◽  
R. Parameshwaran
Keyword(s):  
Heat Treatment ◽  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Cryogenic Treatment ◽  
Treatment Processes ◽  
Change Material

Abstract Microencapsulation is a viable technique to protect and retain the properties of phase change materials (PCMs) that are used in thermal energy storage (TES) applications. In this study, an organic ester as a phase change material was microencapsulated using melamine–formaldehyde as the shell material. This microencapsulated PCM (MPCM) was examined with cyclic cryogenic treatment and combined cyclic cryogenic heat treatment processes. The surface morphology studies showed that the shell surfaces had no distortions or roughness after cryogenic treatment. The cryogenically conditioned microcapsules exhibited diffraction peak intensity shifts and crystal structure changes. The onset of melting for the nonconditioned and conditioned microcapsules were measured to be 8.56–9.56 °C, respectively. Furthermore, after undergoing the cryogenic and heat treatment processes, the PCM microcapsules had appreciable latent heat capacities of 39.8 kJ/kg and 60.7 kJ/kg, respectively. Additionally, the microcapsules were found to have good chemical stability after the cryogenic treatment. In addition, the cryogenically conditioned microcapsules were found to be thermally stable up to 128.9 °C, whereas the nonconditioned microcapsules were stable up to 101.9 °C. Based on the test results, it is obvious that the cryogenically conditioned microcapsules exhibited good thermal properties and are very desirable for cool thermal energy storage applications.

scholarly journals Phase Change Material Melting Process in a Thermal Energy Storage System for Applications in Buildings

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3254 ◽  
Author(s):  
Túlio Nascimento Porto ◽  
João M. P. Q. Delgado ◽  
Ana Sofia Guimarães ◽  
Hortência Luma Fernandes Magalhães ◽  
Gicelia Moreira ◽  
...  
Keyword(s):  
Heat Flux ◽  
Energy Storage ◽  
Heat Exchanger ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Melting Process ◽  
Average Heat ◽  
Change Material

The development of thermal energy storage systems is a possible solution in the search for reductions in the difference between the global energy supply and demand. In this context, the ability of some materials, the so-called phase change materials (PCMs), to absorb and release large amounts of energy under specific periods and operating conditions has been verified. The applications of these materials are limited due to their low thermal conductivity, and thus, it is necessary to associate them with high-conductivity materials, such as metals, to make the control of energy absorption and release times possible. Bearing this in mind, this paper presents a numerical analysis of the melting process of a PCM into a triplex tube heat exchanger (TTHX) with finned copper tubes, which allowed for the heat transfer between a heating fluid (water) and the phase change material to power a liquid-desiccant air conditioning system. Through the analysis of the temperature fields, liquid fractions, and velocities, as well as the phase transition, it was possible to describe the material charging process; then, the results were compared with experimental data, which are available in the specialized literature, and presented mean errors of less than 10%. The total required time to completely melt the PCM was about 105.5 min with the water being injected into the TTHX at a flow rate of 8.3 L/min and a temperature of 90 °C. It was observed that the latent energy that accumulated during the melting process was 1330 kJ, while the accumulated sensitive energy was 835 kJ. The average heat flux at the internal surface of the inner tube was about 3 times higher than the average heat flux at the outer surface of the TTHX intermediate tube due to the velocity gradients that developed in the internal part of the heat exchanger, and was about 10 times more intense than those observed in the external region of the equipment.

Porous ceramic stabilized phase change materials for thermal energy storage

RSC Advances ◽  
2016 ◽  
Vol 6 (53) ◽  
pp. 48033-48042 ◽  
Author(s):  
Songyang Liu ◽  
Huaming Yang
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Porous Ceramic ◽  
Ceramic Preform ◽  
Composite Phase Change Material ◽  
Change Material

This paper aimed to develop a novel form-stable composite phase change material (PCM) by infiltrating molten Na2SO4 into a mullite-corundum porous ceramic preform (M-PCP).

Sign in / Sign up

Export Citation Format

Share Document