scholarly journals Development of a New Aluminium Alloy for Drill Pipes

2021 ◽  
Vol 225 ◽  
pp. 03004
Author(s):  
Dmitry Ivanov ◽  
Alexander Gradoboev ◽  
Dmitry Ryabov ◽  
Roman Vakhromov
Keyword(s):  
Corrosion Resistance ◽  
Aluminium Alloy ◽  
Elevated Temperatures ◽  
High Strength ◽  
Strength Properties ◽  
High Corrosion Resistance ◽  
Solution Ph ◽  
Drill Pipes ◽  
Extruded Products ◽  
6Xxx Series

The new aluminium alloy for drill pipes is one of the 6xxx-series alloys. The alloy has high strength properties at room and elevated temperatures, as well as high corrosion resistance and workability. Semi-finished extruded products from the new alloy have the following properties: UTS = 420 MPa, YTS = 380 MPa, elongation = 10% and YTS150 = 345 MPa, corrosion rate in solution (pH 11) = 0.09 g/m2 h. Based on the obtained properties, the new alloy can be used as a replacement for D16 alloy.

MST 3AL-5CR

Alloy Digest ◽  
1965 ◽  
Vol 14 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Strength Properties ◽  
Temperature Performance ◽  
Plate Forging

Abstract MST 3AL-5CR is a double melted titanium base alloy available in either ingot, bar, rod, plate, forging, or extrusion form. It possesses good creep and high strength properties at room and elevated temperatures to 800 deg. F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-4. Producer or source: Mallory-Sharon Titanium Corporation. Originally published June 1954, revised March 1965.

UDIMET 520

Alloy Digest ◽  
1962 ◽  
Vol 11 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Nickel Base

Abstract UDIMET 520 is a nickel-base alloy recommended for applications where high strength at elevated temperatures is required. It is suitable for service at temperatures up to 1800 F. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-74. Producer or source: Special Metals Inc..

RIO TINTO ALLOY 242.2

Alloy Digest ◽  
2020 ◽  
Vol 69 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Elevated Temperatures ◽  
High Strength ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Rio Tinto ◽  
Permanent Mold Castings ◽  
Río Tinto

Abstract Rio Tinto Alloy 242.2 is a heat-treatable, aluminum-copper-magnesium-nickel casting alloy. It is available in the form of ingots to be remelted for the manufacture of sand and permanent mold castings. Alloy 242.0 is used extensively for applications requiring high strength and hardness at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as casting, machining, and joining. Filing Code: Al-463. Producer or source: Rio Tinto Limited.

BRIMCOLLOY

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Corrosion Resistance ◽  
Rolling Mills ◽  
High Corrosion ◽  
Copper Zinc

Abstract BRIMCOLLOY is a copper-zinc tin alloy having high strength, spring temper, superior conductivity and high corrosion resistance. It is produced in three grades: BRIMCOLLOY 100, BRIMCOLLOY 200, and BRIMCOLLOY 300. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-225. Producer or source: Bridgeport Rolling Mills Company.

IN-102

Alloy Digest ◽  
1969 ◽  
Vol 18 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Elevated Temperatures ◽  
Iron Alloy ◽  
High Strength ◽  
Heat Treating ◽  
High Ductility ◽  
International Nickel Company ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
High Degree

Abstract IN-102 is a nickel-chromium-iron alloy designed for long service at temperatures up to 1300 F. It combines high strength and high ductility at the elevated temperatures with a high degree of structural stability. It is used for aerospace, power and steam turbine components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-147. Producer or source: International Nickel Company Inc..

CARPENTER L-605 ALLOY

Alloy Digest ◽  
1987 ◽  
Vol 36 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base ◽  
Oxidation And Corrosion

Abstract CARPENTER L-605 alloy is a nonmagnetic cobalt-base alloy that has good oxidation and corrosion resistance and high strength at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-81. Producer or source: Carpenter.

BUDERUS 58-28

Alloy Digest ◽  
1972 ◽  
Vol 21 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Cobalt Alloy ◽  
Temperature Performance ◽  
Steel Corporation

Abstract BUDERUS 58-28 is a cobalt alloy having high strength and excellent toughness at elevated temperatures. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-64. Producer or source: Buderus Steel Corporation.

USS TENELON

Alloy Digest ◽  
1975 ◽  
Vol 24 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Elevated Temperatures ◽  
Stress Rupture ◽  
High Strength ◽  
Heat Treating ◽  
Creep Properties ◽  
United States Steel Corporation ◽  
Excellent Corrosion Resistance ◽  
Wide Range ◽  
Mild Acid

Abstract USS TENELON is a completely austenitic, nickel-free stainless steel with exceptionally high strength which is retained at elevated temperatures. It has excellent corrosion resistance in atmospheric and mild acid exposures and maintains nonmagnetic characteristics even when 60% cold reduced. It also has good stress-rupture and creep properties in the range 1200-1500 F. It has a wide range of applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-311. Producer or source: United States Steel Corporation.

Sign in / Sign up

Export Citation Format

Share Document