Life cycle assessment of domestic heat pump hot water systems in Australia

The life cycle assessment of components is becoming increasingly important for planning and construction. In this paper, a novel storage technology for excess electricity consisting of a heat pump, a heat storage and an organic rankine cycle is investigated with regards to its environmental impact. Waste heat is exergetically upgraded, stored in a hot water storage unit and afterwards reconverted to electricity when needed. Such a pilot plant on a lab scale is currently built in Germany. The first part of this paper focuses on geothermal energy as a potential heat source for the storage system and its environmental impact. For a large scale application, geothermal hotspots in Germany are further investigated. The second part analyzes the storage technology itself and compares it to the impacts of commonly used battery storage technologies. Especially during the manufacturing process, significantly better global warming potential values are shown compared to lithium-ion and lead batteries. The least environmental impact while operating the system is with wind power, which suggests an implementation of the storage system into the grid in the northern part of Germany.

Download Full-text

Life Cycle Assessment of an Innovative Hybrid Energy Storage System for Residential Buildings in Continental Climates

Applied Sciences ◽

10.3390/app11093820 ◽

2021 ◽

Vol 11 (9) ◽

pp. 3820

Author(s):

Noelia Llantoy ◽

Gabriel Zsembinszki ◽

Valeria Palomba ◽

Andrea Frazzica ◽

Mattia Dallapiccola ◽

...

Keyword(s):

Life Cycle Assessment ◽

Life Cycle ◽

Residential Buildings ◽

Storage System ◽

Energy Storage System ◽

Hot Water ◽

Hybrid Energy ◽

Hybrid Energy Storage ◽

Innovative System ◽

The Impact

With the aim of contributing to achieving the decarbonization of the energy sector, the environmental impact of an innovative system to produce heating and domestic hot water for heating demand-dominated climates is assessed is evaluated. The evaluation is conducted using the life cycle assessment (LCA) methodology and the ReCiPe and IPCC GWP indicators for the manufacturing and operation stages, and comparing the system to a reference one. Results show that the innovative system has a lower overall impact than the reference one. Moreover, a parametric study to evaluate the impact of the refrigerant is carried out, showing that the impact of the overall systems is not affected if the amount of refrigerant or the impact of refrigerant is increased.

Download Full-text

Life Cycle Assessment (LCA) of an Innovative Compact Hybrid Electrical-Thermal Storage System for Residential Buildings in Mediterranean Climate

Sustainability ◽

10.3390/su13095322 ◽

2021 ◽

Vol 13 (9) ◽

pp. 5322

Author(s):

Gabriel Zsembinszki ◽

Noelia Llantoy ◽

Valeria Palomba ◽

Andrea Frazzica ◽

Mattia Dallapiccola ◽

...

Keyword(s):

Life Cycle Assessment ◽

Life Cycle ◽

Environmental Impact ◽

Mediterranean Climate ◽

Residential Buildings ◽

Renewable Energy Sources ◽

Storage System ◽

Hot Water ◽

Electrical Consumption ◽

The Impact

The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings’ decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact.

Download Full-text

Life Cycle Assessment of the Use of Phase Change Material in an Evacuated Solar Tube Collector

Energies ◽

10.3390/en14144146 ◽

2021 ◽

Vol 14 (14) ◽

pp. 4146

Author(s):

Agnieszka Jachura ◽

Robert Sekret

Keyword(s):

Life Cycle Assessment ◽

Life Cycle ◽

Environmental Impact ◽

Phase Change ◽

Phase Change Material ◽

Solar Collector ◽

Hot Water ◽

Production Operation ◽

Management Scenarios ◽

Change Material

This paper presents an environmental impact assessment of the entire cycle of existence of the tube-vacuum solar collector prototype. The innovativeness of the solution involved using a phase change material as a heat-storing material, which was placed inside the collector’s tubes-vacuum. The PCM used in this study was paraffin. The system boundaries contained three phases: production, operation (use phase), and disposal. An ecological life cycle assessment was carried out using the SimaPro software. To compare the environmental impact of heat storage, the amount of heat generated for 15 years, starting from the beginning of a solar installation for preparing domestic hot water for a single-family residential building, was considered the functional unit. Assuming comparable production methods for individual elements of the ETC and waste management scenarios, the reduction in harmful effects on the environment by introducing a PCM that stores heat inside the ETC ranges from 17 to 24%. The performed analyses have also shown that the method itself of manufacturing the materials used for the construction of the solar collector and the choice of the scenario of the disposal of waste during decommissioning the solar collector all play an important role in its environmental assessment. With an increase in the application of the advanced technologies of materials manufacturing and an increase in the amount of waste subjected to recycling, the degree of the solar collector’s environmental impact decreased by 82% compared to its standard manufacture and disposal.

Download Full-text