Rhodium(III)-Catalyzed C–H Activation/Alkylation of Diazabicyclic Olefins with Aryl Ketones: Facile Synthesis of Functionalized Cyclopentenes

Synlett ◽  
2018 ◽  
Vol 29 (15) ◽  
pp. 2023-2026 ◽  
Author(s):  
K. Radhakrishnan ◽  
P. Santhini ◽  
Greeshma Gopalan ◽  
A. Smrithy

A facile synthesis of biologically important trans-functionalized cyclopentenes by a mild Rh(III)-catalyzed alkylation of strained ­diazabicyclic olefins with aryl ketones in the presence of ammonium ­acetate has been developed. The reaction proceeds through C–H bond activation of the aryl ketone groups by transforming them in to an ­autocleavable directing group, such as in situ-formed imine.

2020 ◽  
Author(s):  
Feriel Rekhroukh ◽  
Wenyi Chen ◽  
Ryan Brown ◽  
Andrew J. P. White ◽  
Mark Crimmin

A palladium pre-catalyst, [Pd(PCy<sub>3</sub>)<sub>2</sub>] is reported for the efficient and selective C–F alumination of fluorobenzenes with the aluminium(I) reagent [{(ArNCMe)<sub>2</sub>CH}Al] (<b>1</b>, Ar = 2,6-di-iso-propylphenyl). The catalytic protocol results in the transformation of sp<sup>2</sup> C–F bonds to sp<sup>2</sup> C–Al bonds and provides a route into reactive organoaluminium complexes (<b>2a-h</b>) from fluorocarbons. The catalyst is highly active. Reactions proceed within 5 minutes at 25 ºC (and at appreciable rates at even –50 ºC) and the scope includes low-fluorine-content substrates such as fluorobenzene, difluorobenzenes and trifluorobenzenes. The reaction proceeds with complete chemoselectivity (C–F vs C–H) and high regioselectivities ( >90% for C–F bonds adjacent to the most acidic C–H sites). The heterometallic complex [Pd(PCy<sub>3</sub>)(<b>1</b>)<sub>2</sub>] was shown to be catalytically competent. Catalytic C–F alumination proceeds with a KIE of 1.1–1.3. DFT calculations have been used to model potential mechanisms for C–F bond activation. These calculations suggest that two competing mechanisms may be in operation. Pathway 1 involves a ligand-assisted oxidative addition to [Pd(<b>1</b>)<sub>2</sub>] and leads directly to the product. Pathway 2 involves a stepwise C–H to C–F functionalisation mechanism in which the C–H bond is broken and reformed along the reaction coordinate, allowing it to act as a directing group for the adjacent C–F site. This second mechanism explains the experimentally observed regioselectivity. Experimental support for this C–H activation playing a key role in C–F alumination was obtained by employing [{(MesNCMe)<sub>2</sub>CH}AlH<sub>2</sub>] (<b>3</b>, Mes = 2,4,6-trimethylphenyl) as a reagent in place of 1. In this instance, the kinetic C–H alumination intermediate could be isolated. Under catalytic conditions this intermediate converts to the thermodynamic C–F alumination product.


2020 ◽  
Author(s):  
Feriel Rekhroukh ◽  
Wenyi Chen ◽  
Ryan Brown ◽  
Andrew J. P. White ◽  
Mark Crimmin

A palladium pre-catalyst, [Pd(PCy<sub>3</sub>)<sub>2</sub>] is reported for the efficient and selective C–F alumination of fluorobenzenes with the aluminium(I) reagent [{(ArNCMe)<sub>2</sub>CH}Al] (<b>1</b>, Ar = 2,6-di-iso-propylphenyl). The catalytic protocol results in the transformation of sp<sup>2</sup> C–F bonds to sp<sup>2</sup> C–Al bonds and provides a route into reactive organoaluminium complexes (<b>2a-h</b>) from fluorocarbons. The catalyst is highly active. Reactions proceed within 5 minutes at 25 ºC (and at appreciable rates at even –50 ºC) and the scope includes low-fluorine-content substrates such as fluorobenzene, difluorobenzenes and trifluorobenzenes. The reaction proceeds with complete chemoselectivity (C–F vs C–H) and high regioselectivities ( >90% for C–F bonds adjacent to the most acidic C–H sites). The heterometallic complex [Pd(PCy<sub>3</sub>)(<b>1</b>)<sub>2</sub>] was shown to be catalytically competent. Catalytic C–F alumination proceeds with a KIE of 1.1–1.3. DFT calculations have been used to model potential mechanisms for C–F bond activation. These calculations suggest that two competing mechanisms may be in operation. Pathway 1 involves a ligand-assisted oxidative addition to [Pd(<b>1</b>)<sub>2</sub>] and leads directly to the product. Pathway 2 involves a stepwise C–H to C–F functionalisation mechanism in which the C–H bond is broken and reformed along the reaction coordinate, allowing it to act as a directing group for the adjacent C–F site. This second mechanism explains the experimentally observed regioselectivity. Experimental support for this C–H activation playing a key role in C–F alumination was obtained by employing [{(MesNCMe)<sub>2</sub>CH}AlH<sub>2</sub>] (<b>3</b>, Mes = 2,4,6-trimethylphenyl) as a reagent in place of 1. In this instance, the kinetic C–H alumination intermediate could be isolated. Under catalytic conditions this intermediate converts to the thermodynamic C–F alumination product.


ChemInform ◽  
2015 ◽  
Vol 46 (30) ◽  
pp. no-no
Author(s):  
Krishnamoorthy Muralirajan ◽  
Radhakrishnan Haridharan ◽  
Sekar Prakash ◽  
Chien-Hong Cheng

Synthesis ◽  
2020 ◽  
Vol 52 (21) ◽  
pp. 3211-3218
Author(s):  
Yunyun Liu ◽  
Baoli Zhao

Owing to the inherent ability of amides to chelate transition-metal catalysts, amide-directed C–H activation reactions constitute a major tactic in directed C–H activation reactions. While the conventional procedures for these reactions usually involve prior preparation and purification of amide substrates before the C–H activation, the step economy is actually undermined by the operation of installing the directing group (DG) and related substrate purification. In this context, directed C–H activation via in situ amidation of the crude material provides a new protocol that can significantly enhance the step economy of amide-directed C–H activation. In this short review, the advances in C–H bond activation reactions mediated or initiated by in situ amidation are summarized and analyzed.1 Introduction2 In Situ Amidation in Aryl C–H Bond Activation3 In Situ Amidation in Alkyl C–H Bond Activation4 Annulation Reactions via Amidation-Mediated C–H Activation5 Remote C–H Activation Mediated by Amidation6 Conclusion


2015 ◽  
Vol 357 (4) ◽  
pp. 761-766 ◽  
Author(s):  
Krishnamoorthy Muralirajan ◽  
Radhakrishnan Haridharan ◽  
Sekar Prakash ◽  
Chien-Hong Cheng

Author(s):  
Xuchong Tang ◽  
Yingwei Zhao

: Transition-metal-catalyzed C−H bond activation employing a directing group is becoming a powerful tool to access C−C or C−hetero bond formation. Oxygen and nitrogen atoms are commonly applied as the electron donor for these directing groups. In contrast, there are only few studies on sulfur-containing groups, probably due to their toxicity to transition-metal catalysts. Nowadays a large amount of C−H activation reactions directed by sulfur-containing auxiliary groups have been successfully achieved. Because these groups can be facilely removed or modified in situ or in further steps, they are of great value in creative synthetic strategies. This paper reviews recent advances in the studies using thioether, thiol/thiophenol/disulfide, sulfoxide, and thiocarbonyl as directing groups for intermolecular C−H functionalizations as well as intramolecular oxidative annulations.


Synthesis ◽  
2020 ◽  
Author(s):  
Hiroto Takahashi ◽  
Yusaku Honjo ◽  
Yu Shibata ◽  
Yuki Nagashima ◽  
Ken Tanaka

It has been established that the dienylation of unfunctionalized arenes with 1,6-diynes, possessing aryl groups at the diyne termini, proceeds to give the corresponding dienylated arenes in the presence of a catalytic amount of an electron-deficient cyclopentadienyl rhodium(III) complex, [CpERhCl2]2 (1), and a stoichiometric amount of silver carbonate. Experimental and theoretical mechanistic studies revealed that an in-situ generated CpERh(I) complex might catalyze the present dienylation reaction.


2020 ◽  
Author(s):  
Sukdev Bag ◽  
Sadhan Jana ◽  
Sukumar Pradhan ◽  
Suman Bhowmick ◽  
Nupur Goswami ◽  
...  

<p>Despite the widespread applications of C–H functionalization, controlling site selectivity remains a significant challenge. Covalently attached directing group (DG) served as an ancillary ligand to ensure proximal <i>ortho</i>-, distal <i>meta</i>- and <i>para</i>-C-H functionalization over the last two decades. These covalently linked DGs necessitate two extra steps for a single C–H functionalization: introduction of DG prior to C–H activation and removal of DG post-functionalization. We introduce here a transient directing group for distal C(<i>sp<sup>2</sup></i>)-H functionalization <i>via</i> reversible imine formation. By overruling facile proximal C-H bond activation by imine-<i>N</i> atom, a suitably designed pyrimidine-based transient directing group (TDG) successfully delivered selective distal C-C bond formation. Application of this transient directing group strategy for streamlining the synthesis of complex organic molecules without any necessary pre-functionalization at the distal position has been explored.</p>


Synthesis ◽  
2021 ◽  
Author(s):  
Zheng-Yang Gu ◽  
Yang Wu ◽  
Feng Jin ◽  
Bao Xiaoguang ◽  
Ji-Bao Xia

An atom- and step-economic intermolecular multi-component palladium-catalyzed C–H amidation of alkenes with carbon monoxide and organic azides has been developed for the synthesis of alkenyl amides. The reaction proceeds efficiently without an ortho-directing group on the alkene substrates. Nontoxic dinitrogen is generated as the sole by-product. Computational studies and control experiments have revealed that the reaction takes place via an unexpected mechanism by tandem palladium catalysis.


1999 ◽  
Vol 564 ◽  
Author(s):  
P. W. DeHaven ◽  
K. P. Rodbell ◽  
L. Gignac

AbstractThe effectiveness of a TiN capping layer to prevent the conversion of α-titantium to titanium nitride when annealed in a nitrogen ambient has been studied over the temperature range 300–700°C using in-situ high temperature diffraction and transmission electron microscopy. Over the time range of interest (four hours), no evidence of Ti reaction was observed at 300°C. At 450°C. nitrogen was found to diffuse into the Ti to form a Ti(N) solid solution. Above 500°C the titanium is transformed to a second phase: however this reaction follows two different kinetic paths, depending on the annealing temperature. Below 600°C. the reaction proceeds in two stages, with the first stage consisting of Ti(N) formation, and the second stage consisting of the conversion of the Ti(N) with a transformation mechanism characteristic of short range diffusion (grain edge nucleation). Above 600°C, a simple linear transformation rate is observed.


Sign in / Sign up

Export Citation Format

Share Document