The Control Of Heparin Administration By The Activated Partial Thromboplastin Time(APTT)

1981 ◽  
Author(s):  
Jean M Thomson

The UK National Quality Control Trials have previously shown that the various APTT methods differ in their ability to detect low levels of heparin (Poller et al 1980). UK and US proficiency surveys have also shown lack of linearity of some APTT methods over a range of heparin concentrations. A further, recent collaborative exercise, using lyophilised plasma from a heparinised donor, has confirmed that most of the commonly-used commercial reagents have a higher threshhold of sensitivity to heparin than the reference reagent provided by the National (UK) Reference Laboratory. Additional studies on fresh plasma samples obtained from heparinised patients, have demonstrated considerable variations in the detection of heparin by widely-used commercial APTT techniques.

1999 ◽  
Vol 45 (8) ◽  
pp. 1176-1180 ◽  
Author(s):  
Mats RÅnby ◽  
Tony Gojceta ◽  
Kerstin Gustafsson ◽  
Kenny M Hansson ◽  
Tomas L Lindahl

Abstract Background: Ca2+ activity close to the physiological concentration of 1.3 mmol/L is essential in blood coagulation. Is this also true for the performance of global diagnostic coagulation assays? We searched for compounds that would buffer Ca2+ activity at ∼1.3 mmol/L without disturbing coagulation reactions and investigated whether such Ca2+ buffering improves diagnostic efficacy in global diagnostic coagulation tests. Methods: Buffering was investigated by mixing CaCl2 and 11 candidate compounds and determining Ca2+ activity. The best candidates were added to mixtures of plasma and thromboplastin to detect interference with coagulation reactions. The best of these candidates, isocitrate, was used to modify an activated partial thromboplastin time (APTT), buffering final Ca2+ activity to ∼1.3 mmol/L. Plasma samples from 22 healthy individuals and 120 patients were analyzed with original and modified APTT to determine whether diagnostic efficacy was improved. Results: Two suitable Ca2+ buffers, citrate and isocitrate, were found. Isocitrate was preferred as being less coagulation inhibitory, a better Ca2+ buffer, and possibly a better anticoagulant. The isocitrate-modified APTT showed a final Ca2+ activity of 1.60 ± 0.07 mmol/L, compared with 2.73 ± 0.20 mmol/L for the original APTT. The means and SDs for the healthy individuals were determined for both procedures, and the values were used to express patient deviation from normality (difference from mean divided by SD). The deviation was greater for the modified APTT; 4.3 ± 5.7, compared with 3.6 ± 5.0 (P <0.005) for the original APTT. Conclusions: Isocitrate can be used to buffer Ca2+ activity at physiological concentrations and can serve as an anticoagulant. APTT with isocitrate-buffered Ca2+ activity shows signs of improved diagnostic efficacy.


1966 ◽  
Vol 12 (5) ◽  
pp. 263-268 ◽  
Author(s):  
Jane G Lenahan ◽  
Sheldon Frye ◽  
George E Phillips

Abstract The activated partial thromboplastin time (APTT) was compared to the whole blood clotting time (WBCT) as a control of heparin administration. The APTT was shown to be a sensitive system for the control of heparin therapy, with the added advantage that the blood can be drawn and taken to the laboratory for assay. The effective therapeutic range in man remains to be established.


Author(s):  
Lene Trondsetås ◽  
Gustav Mikkelsen ◽  
Ingrid Alsos Lian

AbstractBackground:We recently observed that exposure to dry ice lowered sample pH and increased clotting times in lupus anticoagulant analyses, and that such changes could be prevented by placing samples at −80°C after dry ice exposure. In the current study, we sought to evaluate the effects of dry ice exposure on pH and various commonly used coagulation analyses.Methods:Citrated plasma from 30 healthy blood donors was allocated to four preanalytical regimes: (1) immediate analysis of fresh plasma or (2) storage at −20°C; (3) storage at −20°C followed by dry ice exposure for 24 h or (4) storage at −20°C followed by dry ice exposure for 24 h and storage at −80°C for 24 h before analysis. Analyses of pH, prothrombin time international normalized ratio (PT-INR), activated partial thromboplastin time (APTT), antithrombin, fibrinogen, protein C and protein S was performed.Results:Samples exposed to dry ice had significantly lower pH, prolonged clotting times in PT-INR, APTT and fibrinogen analyses as well as lower levels of protein C, than samples not exposed to dry ice. These changes in coagulation analyses were not present if samples were stored at −80°C for 24 h after dry ice exposure. Antithrombin and protein S were not significantly affected by dry ice exposure.Conclusions:Dry ice exposure lowered sample pH and affected various coagulation analyses. These effects were avoided by storing samples at −80°C for 24 h after dry ice exposure.


1979 ◽  
Author(s):  
H. Bounameaux ◽  
G.A. Marbet ◽  
H. Airenne ◽  
E. Grossmann ◽  
B. Stanojevic ◽  
...  

In 63 plasma samples from patients under heparin we determined the heparin concentration using the chromogenic substrats S-2222 (COATEST Heparin). Thrombin time (TT), activated partial thromboplastin time (APTT), antithrombin III activity (ATIIIact) and concentration (ATIIIimm) were also measured. A good correlation was found between heparin concentration and TT (r= .850, p< .001), heparin concentration and APTT (r =669, p < .001) while the correlation coefficient r between TT and APLT was .896 (p< .001).We found a statilttically significant reduction of ATIIIact with increasing APTT (p < .05. The ATIIIact and ATIIIimm values were also lower (p < .001) in the overanticoaculated group (n=ll) than in the group with insufficient heparinisation (0.18). The mean (±SO) heparin concentration in 12 plasmas with both TT and APTT in the therapeutic range was .54 (±.15) USP-U/al, very similar to that of 13 plasma (.68 ± .46 U/al) insufficiently heparinised accordirig to the APTT. However, the TT recognised then as correctly anticoagulated. Regarding these findings and our good experience without complication by monitoring heparin therapy with TT we assume that TT is more accurate than APTT for this aim.


2000 ◽  
Vol 12 (5) ◽  
pp. 433-437 ◽  
Author(s):  
Reinhard Mischke

To determine the sensitivity for detection of coagulation factor deficiencies by commercial reagents for canine plasma, 5 commercial activated partial thromboplastin time (APTT) reagents with different types of contact activator and phospholipid of various origin were examined. Thirty canine plasma samples with minor or moderate deficiencies of coagualition factors that influence the APTT were examined. Significant differences were found for the sensitivity of various reagents, but no correlation was found with the type of contact activator. Following the test instructions provided by the manufacturers, the number of APTT results that were prolonged beyond the reference range varied between 20 and 30 (sensitivity = 0.67–1.00); the number of corresponding results using a standardized test protocol varied between 19 and 28 (sensitivity: 0.63–0.93). The most sensitive reagent contained kaolin as a contact activator and a human placental thromboplastin. The results of this study indicate that the APTT test optimized for human plasma is also a sensitive screening test of the intrinsic system of canine plasma, provided that a suitable reagent is used.


Author(s):  
Ralf Junker ◽  
Margit Käse ◽  
Helmut Schulte ◽  
Ruth Bäumer ◽  
Claus Langer ◽  
...  

AbstractThe Dade Behring BCS is a coagulation analyser with optical reaction detection (standard 405nm). The present study was conducted to evaluate measurement at 570nm for analyses in interfering plasma samples. Prothrombin time (PT), activated partial thromboplastin time (aPTT), fibrinogen and D-dimer in normal (n=50), lipaemic (n=60), icteric (n=113), and haemolytic (n=58) samples were measured at 405 and 570nm. As they are unaffected by the optical properties of the sample, the mechanical STAcompact analyser (Roche Diagnostics) and an ELISA technique were defined as the “comparison” methods. The percentage of valid PT results using the 570-nm method varied from 54% (lipaemic samples) to 97% (haemolytic samples). Valid aPTT measurements were found in 67% (lipaemic samples) up to 93% (icteric samples) of samples. Fibrinogen measurement revealed valid results in 58% (lipaemic samples) to 100% (haemolytic samples) of samples. The number of valid D-dimer results varied from 28% (lipaemic material) up to 100% (haemolytic material). Significant inter-method differences were found: aPTT in lipaemic (BCS 405 vs. 570nm) and icteric samples (STAcompact vs. BCS 405 and 570nm); fibrinogen in lipaemic (BCS 405 vs. 570nm), icteric (BCS 405 vs. 570nm; STAcompact vs. BCS 570nm) and haemolytic samples (STAcompact vs. BCS 405 and 570nm). Differences between the BCS 570-nm and the STAcompact methods were in most cases low and less pronounced than between the BCS 570- and 405-nm methods, making the BCS 570-nm method an alternative to measurement at 405nm. Limitations have to be taken into account regarding lipaemic plasma.


Blood ◽  
2015 ◽  
Vol 126 (23) ◽  
pp. 3281-3281
Author(s):  
Pierre A. Toulon ◽  
Yaelle Eloit ◽  
Motalib Smahi ◽  
Didier Jambou ◽  
Anny Appert-Flory ◽  
...  

Abstract Activated partial thromboplastin time (aPTT) is a routine clotting assay that is widely used to globally screen for coagulation abnormalities, particularly in the pre-operative period. It is commonly admitted that a prolonged test result, may trigger the need for specific assays to be performed and particularly factor assay. However, the responsiveness of aPTT reagents to deficiencies of clotting factors varies because of differences in the type of activator and in the composition/concentration in phospholipids. To investigate the suitability of 5 commercially available aPTT reagents to detect mild/moderate deficiencies of clotting factors, we assessed their responsiveness at increasing concentrations of factors involved not only in the intrinsic pathway of the coagulation system, but also in the common pathway, as very few data were available. The sensitivity of 5 aPTT reagents i.e. HemosIL APTT SP (Instrumentation Laboratory, IL), HemosIL SynthASil (IL), STA-CK Prest (Stago), TriniCLOT aPTT HS (TCoag), and TriniCLOT Automated aPTT (TCoag) to clotting factor was assessed according to the recommendation of the CLSI H47-A2 guideline, by using factor-deficient plasmas spiked with a calibration plasma (all from IL) to produce individual FVIII:C, FIX, FXI, FXII, FV, FX, or FII activities ranging from <1% to ~100 %. Each of the spiked plasma samples was used for the determination of aPTT after being assayed to confirm the activity of the single factor. Tests were simultaneously performed in duplicate on the ACL TOP 700 analyzer (IL) and the values were averaged. Test results were expressed as the sample-to-control ratio, the latter was defined as the clotting time obtained in the calibration plasma containing ~100 % factor activity. The factor activity producing a prolongation of aPTT above 1.20 (patient-to-control ratio) was assigned as the factor responsiveness in % for that reagent. The level (in %) of a given clotting factor responsible for the prolongation of aPTT above 1.20 was highly variable from one aPTT reagent to another (Table). Moreover, for one given aPTT reagent, its sensitivity was very different depending on the specific factor. Actually, the aPTT responsiveness to FVIII:C ranged from 33 % with TriniCLOT aPTT HS to 46 % with HemosIL APTT SP. For FIX, the range was from 18 % with TriniCLOT Automated aPTT to 57 % with HemosIL SynthASil. The aPTT responsiveness to FXI ranged from 38 % with HemosIL SynthASil to 50 % with HemosIL APTT SP, and that to FXII was from 27 % with STA-CK Prest to 48 % with TriniCLOT aPTT HS. So, HemosIL APTT SP showed a good sensitivity (above 42%) to all 3 clotting factors which mild deficiencies are known to be associated with an hemorrhagic tendency (FVIII:C, FIX, and FXI). The same applied to HemosIL SynthASil, which was very sensitive to FIX deficiency (57%), and to STA-CK Prest and TriniCLOT aPTT HS with borderline sensitivity to FIX (29 % for both). The responsiveness to FIX of TriniCLOT Automated APTT was found to be very low (18%). Concerning coagulation factors involved in the common coagulation pathway, the sensitivity to FV was between 38 % with STA-CK Prest and 61 % with TriniCLOT Automated aPTT and that to FX was between 7.0 % with TriniCLOT aPTT HS and 49 % with HemosIL SynthASil. The sensitivity to FII was very low and quite similar for the 5 tested reagents in the range from 9.1 % to 10.7 %. Table. HemosIL APTT SP HemosIL SynthASil STA-CK Prest TriniCLOT APTT HS TriniCLOT Automated aPTT Factor VIII (%) 46 38 43 33 41 Factor IX (%) 42 57 29 29 18 Factor XI (%) 50 38 44 48 46 Factor XII (%) 31 42 27 48 41 Factor V (%) 45 44 38 44 61 Factor X (%) 17 49 16 7.0 9.2 Factor II (%) 9.7 9.1 10.0 9.5 10.7 The difference between reagents responsiveness to FIX was confirmed using plasma samples from patients with hemophilia B either treated with FIX concentrates or not. These results suggested that the sensitivity of the 5 tested aPTT reagents to single factor deficiency was highly variable. If the responsiveness to FVIII:C and FXI of the tested aPTT reagents was accurate, it was not the case for FIX with borderline sensitivity of STA-CK Prest and TriniCLOT aPTT HS (29 %), and more importantly a too low sensitivity of Triniclot Automated aPTT (18%). As this was confirm in clinical materials, this must be considered when analyzing clinical materials, particularly plasma from hemophilia B patients, as mild deficiency states might be undiagnosed with the less sensitive reagent. Disclosures No relevant conflicts of interest to declare.


Sign in / Sign up

Export Citation Format

Share Document