Evaluation of Bosch Process–Sourced Carbon in Low-Carbon Steel and Gray Iron Casting for Martian Surface Manufacturing

2022 ◽  
Vol 35 (2) ◽  
Author(s):  
Blake C. Stewart ◽  
Haley R. Doude ◽  
Terry L. Taylor ◽  
Morgan B. Abney ◽  
Hongjoo Rhee
Keyword(s):  
Carbon Steel ◽  
Low Carbon Steel ◽  
Gray Iron ◽  
Low Carbon ◽  
Martian Surface ◽  
Iron Casting ◽  
Bosch Process

Development of trimming technology for hot rolled ultra-low carbon steel

1993 ◽  
Vol 90 (7-8) ◽  
pp. 917-922
Author(s):  
Y. Matsuda ◽  
M. Nishino ◽  
J. Ikeda
Keyword(s):  
Carbon Steel ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Ultra Low Carbon Steel ◽  
Hot Rolled

The Effect of Small Defects on Fatigue Life of a Low Carbon Steel

2019 ◽  
Author(s):  
Natalia Gonçalves Torres ◽  
Vinícius Rodrigues ◽  
Edgar Mamiya
Keyword(s):  
Fatigue Life ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Low Carbon

Estimation of Some Mechanical Properties for Similar & Dissimilar Welded Joints

2014 ◽  
Vol 2 (1) ◽  
pp. 59-76
Author(s):  
Abdullah Daie'e Assi
Keyword(s):  
Stainless Steel ◽  
Carbon Steel ◽  
Austenitic Stainless Steel ◽  
Base Metal ◽  
Welded Joints ◽  
Plate Thickness ◽  
Low Carbon Steel ◽  
Dissimilar Metals ◽  
Low Carbon ◽  
Steel Type

This research deals with the choice of the suitable filler metal to weld the similar and dissimilar metals (Low carbon steel type A516 & Austenitic stainless steel type 316L) under constant conditions such as, plate thickness (6 mm), voltage (78 v), current (120 A), straight polarity. This research deals with three major parts. The first parts Four types of electrodes were used for welding of dissimilar metals (C.St A516 And St.St 316L) two from mild steel (E7018, E6013) and other two from austenitic stainless steel (E309L, E308L) various inspection were carried out include (Visual T., X-ray T., δ- Ferrite phase T., and Microstructures T.) and mechanical testing include (tensile T., bending T. and micro hardness T.) The second parts done by used the same parameters to welding similar metals from (C.St A516) Or (St.St 316L). The third parts deals with welding of dissimilar weldments (C.St And St.St) by two processes, gas tungsten are welding (GTAW) and shielded metal are welding (SMAW).        The results indicated that the spread of carbon from low carbon steel to the welding zone in the case of welding stainless steel elect pole (E309L) led to Configuration Carbides and then high hardness the link to high values ​​compared with the base metal. In most similar weldments showed hardness of the welding area is  higher than the hardness of the base metal. The electrode (E309L) is the most suitable to welding dissimilar metals from (C.St A516 With St.St 316L). The results also showed that the method of welding (GTAW) were better than the method of welding (SMAW) in dissimilar welded joints (St.St 316L with C.St A516) in terms of irregular shape and integrity of the welding defects, as well as characterized this weldments the high-lift and resistance ductility good when using the welding conditions are similar.

Evaluation of double channel GMAW fillet welds of low carbon steel using solid wire

2015 ◽  
Vol 57 (7-8) ◽  
pp. 680-684 ◽  
Author(s):  
Tolga Mert ◽  
Nurullah Gultekin ◽  
Ahmet Karaaslan
Keyword(s):  
Carbon Steel ◽  
Low Carbon Steel ◽  
Fillet Welds ◽  
Low Carbon ◽  
Double Channel
Sign in / Sign up

Export Citation Format

Share Document