Three-Dimensional Stability Analysis of Bank Slopes with Reservoir Drawdown Based on Rigorous Limit Equilibrium Method

2020 ◽  
Vol 20 (12) ◽  
pp. 04020229
Author(s):  
Xiao-Ping Zhou ◽  
Xiong Wei ◽  
Chao Liu ◽  
Hao Cheng
2012 ◽  
Vol 249-250 ◽  
pp. 1099-1102
Author(s):  
Yi Sheng Huang ◽  
Jian Lin Li

Amending the normal stress over the slip surface based on the stress field by numerical analysis, applying the three-dimensional global limit equilibrium method to the stability analysis of tension-slackened rock mass in the right bank of Yagen hydropower station. Stability analysis shows that if do not take any measures, the loose rock mass stability can cater to the Specification demand, but some small sliders is in the limit state under the water and earthquake condition, if use the cutting slope and unloading scheme, the whole loose rock mass and the all small sliders can meet the Specification standard stability requirements.


2015 ◽  
Vol 52 (12) ◽  
pp. 2055-2066 ◽  
Author(s):  
Hao Cheng ◽  
Xiaoping Zhou

Conventional stability analysis of landslides is investigated using the factor of safety of the entire sliding body, which provides no information concerning displacements of the analyzed landslides. In this paper, a novel displacement-based rigorous limit equilibrium method is proposed to investigate the displacements and stabilities of three-dimensional landslides. The relationship between the shear stresses acting on the base of the columns and the shear displacements is established based on the hyperbolic soil model, which can be directly obtained from direct shear tests. According to the displacement compatibility among the columns, the shear displacements of all columns can be determined by the vertical and horizontal displacements at a key point. Combining the six equilibrium conditions of the discretized columns with the nonlinear constitutive relation between stress and displacement of soils, the vertical displacement at the key point can be determined. By introducing the strength reduction technique into the displacement-based rigorous limit equilibrium method, the relationship between the reduction factor and the vertical displacement can be obtained. The displacement and the safety factor of three-dimensional landslides can be defined. Moreover, two cases are given to verify the robustness and precision of the present method in detail.


2013 ◽  
Vol 275-277 ◽  
pp. 1427-1430
Author(s):  
Yi Sheng Huang ◽  
Jian Lin Li

Firstly analyzed the stability of blocks with block theory and secondly evaluated the stability of blocks with three-dimensional limit equilibrium method and finally evaluated the whole stability of slopes. Stability analysis for the slope of Maerdang hydropower station shows that natural slopes which belong to the upstream of Hadehei ditch on the right bank will not occur wedge slide, tailrace slopes of hydropower station have not sliding slopes searched which are in potential slide, if taking some measures to reinforce the stability of man-made slopes on the face rock-fill hub, which may meet the demand of the specification.


2013 ◽  
Vol 275-277 ◽  
pp. 1423-1426
Author(s):  
Lin Kuang ◽  
Ai Zhong Lv ◽  
Yu Zhou

Based on finite element analysis software ANSYS, slope stability analysis is carried out by Elastic limiting equilibrium method proposed in this paper. A series of sliding surface of the slope can be assumed firstly, and then stress field along the sliding surface is analyzed as the slope is in elastic state. The normal and tangential stresses along each sliding surface can be obtained, respectively. Then the safety factor for each slip surface can be calculated, the slip surface which the safety factor is smallest is the most dangerous sliding surface. This method is different from the previous limit equilibrium method. For the previous limit equilibrium method, the normal and tangential stresses along the sliding surface are calculated based on many assumptions. While, the limit equilibrium method proposed in this paper has fewer assumptions and clear physical meaning.


Sign in / Sign up

Export Citation Format

Share Document