Parametric Study on the Resilient Response of Ballasted Railway Track Substructure Using Numerical Modeling

Author(s):  
Mohamed. A. Shahin ◽  
Buddhima Indraratna
2018 ◽  
Vol 4 (48) ◽  
pp. 51-60 ◽  
Author(s):  
Libor IŽVOLT ◽  
Peter DOBEŠ ◽  
Juraj PIEŠ

The initial part of the paper briefly characterizes a long-term experimental activity at the Department of Railway Engineering and Track Management (DRETM). The research of the DRETM focuses, besides other research activities and specific problems in the field of railway engineering (application of new structures and construction materials in conventional and modernized railway tracks, modernisation and rehabilitation of existing railway tracks for higher speeds, track diagnostics, influence of track operation on noise emissions and design of structural measures, possibility of application of recycled ballast bed material in the track substructure, ballast recycling technologies, ecological assessment of recycled material of the track substructure), on various factors affecting track substructure freezing. In 2012-2017, in the campus of the University of Žilina (UNIZA), an Experimental stand DRETM was built for the research purposes. The experimental stand DRETM consists of 6 types of track substructure placed in an embankment or a cut, in the 1:1 scale. Besides conventional building materials (crushed aggregate), these structures also include various thermal insulation materials (Liapor concrete, Styrodur, foam concrete). A significant part of the paper deals with numerical modeling of the freezing process of track substructure (an embankment with the embedded protective layer of crushed aggregate, fr. 0/31.5 mm) for various boundary conditions (air frost index, average annual air temperature), using SoilVision software. The aim of this research is to identify the thermal insulation effects of different thicknesses of snow cover on the depth of penetration of the zero isotherm into the track substructure (railway track). The paper conclusion specifies the influence of different snow cover thicknesses, or nf factor (factor expressing the dependency between the mean daily air temperature and the temperature on the ballast bed surface) and various climatic conditions (frost indexes and average annual air temperatures), affecting the railway infrastructure, on the resulting depth of freezing of the track substructure (railway track). These outputs will be in the further research used for the design of nomogram for determining the thickness of the protective layer of the frost-susceptible subgrade surface of the track substructure.


Energy ◽  
2019 ◽  
Vol 172 ◽  
pp. 220-231 ◽  
Author(s):  
Zhengxuan Liu ◽  
Zhun (Jerry) Yu ◽  
Tingting Yang ◽  
Letizia Roccamena ◽  
Pengcheng Sun ◽  
...  

Solar Energy ◽  
2019 ◽  
Vol 187 ◽  
pp. 411-426 ◽  
Author(s):  
Hafiz Abdullah Zafar ◽  
Abdul Waheed Badar ◽  
Fahad Sarfraz Butt ◽  
Muhammad Yasin Khan ◽  
M. Salman Siddiqui

2016 ◽  
Vol 16 (08) ◽  
pp. 1550050 ◽  
Author(s):  
Lakshitha M. G. Wijesundara ◽  
Simon K. Clubley

This paper details the development of an engineering assessment procedure for reinforced concrete (RC) column failure when subjected to time-variant coupled axial and lateral loads due to internal building detonations. This is based on a comprehensive parametric study conducted using an advanced uncoupled Euler–Lagrange numerical modeling; splitting the structural and flow solvers for maximum integrity and accuracy. The column assessment charts discussed in this paper provide threshold combinations of TNT equivalence and stand-off distance for a range of column residual axial capacity levels corresponding to two key internal blast environments: Vented and contained. This will be of direct relevance to both practitioners and researchers involved with protective design of civilian and military buildings.


Author(s):  
Jabbar Ali Zakeri ◽  
Milad Alizadeh Galdiani ◽  
Seyed Ali Mosayebi

Lateral movements of the ballasted railway track especially in the continuous welded rail (CWR) occur in sharp curves because of high lateral forces. Several strategies have been proposed to increase the track lateral resistance which most of them related to track curves with small radii. In this paper, track lateral supports as a new method have been utilized and a series of field tests have been conducted by using the Single Tie Push Tests (STPT) and Multi Tie Push Tests (MTPT) and their results are compared with the numerical modeling. The results of numerical modeling and field tests show that the track lateral resistance significantly increases in the railway with lateral supports, so that the lateral displacements of track are as a bilinear form.


Sign in / Sign up

Export Citation Format

Share Document