Porous asphalt pavements allow designers to introduce more sustainability into projects and lessen their environmental impact. Current design procedures are based primarily on hydrologic considerations; comparatively little attention has been paid to their structural design aspects. As their use grows, a design procedure and representative material structural properties are needed to ensure that porous pavements do not deteriorate excessively under traffic loads. The objective of this project was to develop a simple, easy to apply design procedure for the structural design of porous asphalt pavements. Two methodologies were considered for such a structural design procedure: ( a) the 1993 AASHTO Pavement Design Guide empirical approach, and ( b) the mechanistic–empirical approach employed by the AASHTOWare Pavement ME Design software. A multifactor evaluation indicated the empirical 1993 AASHTO design procedure to be the most appropriate platform at this time. It is noted, however, that both design procedures lack validation of porous asphalt pavements against field performance. AASHTO design parameters and associated material characteristics are recommended, based on an extensive literature review. For “thin” open-graded base structures (12 in. or less), the AASHTO procedure is performed as published in the 1993 Guide. For “thick” base structures (>12 in.), the base/subgrade combination is considered a composite system which supports the porous asphalt layer; an equivalent deflection-based approach is described to estimate the composite resilient modulus of the foundation system, prior to applying the 1993 AASHTO design procedure.
Coordinated Control of a Doubly-Fed Induction Generator-Based Wind Farm and a Static Synchronous Compensator for Low Voltage Ride-through Grid Code Compliance during Asymmetrical Grid Faults
