Laboratory Investigation of Sugarcane Bagasse as Soil Reinforcement Material

2016 ◽  
Author(s):  
Vincent Oderah ◽  
Denis Kalumba
2020 ◽  
Vol 12 (1) ◽  
pp. 1704-1724
Author(s):  
Myoung-Soo Won ◽  
Christine P. Langcuyan

AbstractSoil is weak in tension but strong in compression. The resistance to tensile deformation of soil is given by the tensile force of the reinforcement in the reinforced soil, and the tensile force of the reinforcement is generated by the frictional force at the soil-reinforcement interface. When the soil-reinforcement is effectively interacted by the compaction, the deformation of the soil becomes equal to the tensile deformation of the reinforcement material, which means that the soil is bound to the tensile force of the reinforcement material and thus has a great resistance to the tensile deformation. Therefore, compaction is one of the major parameters affecting the behavior of the mechanically stabilized earth (MSE) wall. In this study, a series of numerical analyses was performed to investigate the compaction effect on the behavior of the MSE walls. The results showed that the horizontal displacement of the MSE wall significantly increased during the construction and decreased because of surcharge load application after the construction. In addition, the strains of reinforcement increased significantly during the construction and decreased slightly because of surcharge load application after the construction. Therefore, it is important to consider the compaction loads when modeling the MSE walls, so that the lateral displacement at wall facing will not be underestimated during construction and will not be overestimated because of surcharge load application after the construction.


2017 ◽  
Vol 13 (9) ◽  
pp. 6475-6479
Author(s):  
M. Arulraj ◽  
P.K. Palani ◽  
L. Venkatesh

Aluminium based composites exhibit many attractive material properties such as increased stiffness, wear resistance, specific strength and vibration damping and decreased co-efficient of thermal expansion compared with the conventional aluminium alloys. Aluminium Matrix Composites consist of non-metallic reinforcement which offers advantageous properties over base material. Reinforcements like SiC, B4C and Al2O3 are normally preferred to improve the mechanical properties. Here Aluminum LM25 is selected as matrix material while Silicon carbide and Boron carbide are selected as reinforcement material. The fabrication of aluminium matrix was done by stir casting method. In the present study an attempt has been made to investigate the effect of three major stir casting parameters (stir speed, stir duration and preheated temperature of reinforcement material) on stir casting of Aluminium LM25 - SiC - B4C composite. Experiments were conducted based on Taguchi methodology. Taguchi quality design concepts of L9 orthogonal array has been used to determine S/N ratio and through S/N ratio a set of optimum stir casting parameters were obtained. The experimental results confirmed the validity of Taguchi method for enhancing tensile strength of castings. 


2013 ◽  
Vol 58 (3) ◽  
pp. 659-662 ◽  
Author(s):  
K. Gawdzińska

Abstract In this paper it is stated, that a set of quality features of metal matrix composite castings differs from the same set for castings of classic materials, although some features are common for both of these material groups. These features (pertaining to a set of quality characteristics of composite castings) have been named as specific, they have not been determined yet and a description of material quality should be performed (according to the qualitology) on a principle of description of quality characteristics of this product. Therefore, this set of features has been determined. It was proposed to add the following characteristics to the set of specific features of composite castings quality: matrix material, reinforcement material, binding between components and porosity of the composite casting. In this set a sub-set of quality characteristics of composite castings was also determined.


Sign in / Sign up

Export Citation Format

Share Document