Study of caffeine as corrosion inhibitors of carbon steel in chloride solution containing hydrogen sulfide using electrochemical impedance spectroscopy (EIS)

2015 ◽  
Author(s):  
Agus Solehudin ◽  
Ega Taqwali Berman ◽  
Isdiriayani Nurdin
Keyword(s):  
Hydrogen Sulfide ◽  
Electrochemical Impedance Spectroscopy ◽  
Carbon Steel ◽  
Impedance Spectroscopy ◽  
Chloride Solution ◽  
Corrosion Inhibitors ◽  
Electrochemical Impedance

scholarly journals Sage Extract as a Natural Source of Corrosion Inhibitor for Tinplate in 3.0 % NaCl

2021 ◽  
Vol 59 (4) ◽  
Author(s):  
Maja Dent ◽  
Regina Fuchs-Godec
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Sodium Chloride ◽  
Impedance Spectroscopy ◽  
Corrosion Inhibitor ◽  
Chloride Solution ◽  
Sodium Chloride Solution ◽  
Corrosion Inhibitors ◽  
Electrochemical Impedance ◽  
Low Cost ◽  
Green Inhibitor

Research background. Due to the growing interest and attention of the world towards environmental problems and protection of environment, the worldwide demand for biodegradable and effective corrosion inhibitors for tinplate has grown. Considering the diversity of the structures of polyphenols that are present in sage extract, it represents a promising potential source of low-cost and biodegradable effective green corrosion inhibitors for tinplate in 3.0 % sodium chloride solution which is evaluated in this study. Experimental approach. Tafel polarization and electrochemical impedance spectroscopy (EIS) at 25 °C has been used to evaluate the inhibition action of sage (Salvia officinalis, L.) extract as a green inhibitor for the corrosion protection for tinplate in 3.0 % sodium chloride solution. Results and conclusions. Electrochemical impedance spectroscopy has been used to show that sage extract could serve as an effective inhibitor (90.2 %) for the corrosion of tinplate in 3.0 % NaCl at a concentration of 0.2 mg/L, and temperature of 25 °C. The results obtained from potentiodynamic polarization have revealed that the sage extract inhibitor acts as a mixed type, with inhibition efficiency up to 82.5% and the inhibition efficiencies calculated from EIS are in close agreement with those results. FTIR results indicated that the inhibitory effect of the sage extract is due to the presence of a passivation layer on the tinplate surface, which consists of organic compounds such as polyphenols. It has been confirmed by these results that the sage extract is more efficient at inhibiting the corrosion of tinplate at a concentration of 0.2 mg/L than in higher concentrations. Also, it exhibits good inhibitive performance for tinplate in 3 % sodium chloride solution. Novelty and scientific contributions. The exceptional corrosion potential of sage extract opens a door for its use and revalorization as a green corrosion inhibitor in the food industry.

The Protection of Reinforcing Steel in Concrete by Migrating Corrosion Inhibitor

2014 ◽  
Vol 629-630 ◽  
pp. 136-143
Author(s):  
J.S. Cai ◽  
C.C. Chen ◽  
J.Z. Liu ◽  
L. Shi
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Carbon Steel ◽  
Impedance Spectroscopy ◽  
Corrosion Inhibitor ◽  
Linear Polarization ◽  
Polarization Resistance ◽  
Corrosion Inhibitors ◽  
Electrochemical Impedance ◽  
Reinforcing Steel ◽  
Linear Polarization Resistance

In this paper, the performance of two kinds of migrating corrosion inhibitors on the corrosion behavior of steel in concrete under wet-dry cycle was investigated. The wet-dry cycle duration on the open circuit, current density and impedance of carbon steel imbedded in concrete were analyzed by linear polarization resistance (LPR) and electrochemical impedance spectroscopy (EIS). The results show that two kinds of migrating corrosion inhibitors can restrain corrosion of reinforcing steel, the corrosion efficiency of ZX was less more than MCI. Migrating corrosion inhibitor not only can improve carbon steel impedance, also can improve concrete resistant. Key words: migrating corrosion inhibitor;Cl-;reinforcing steel;linear polarization resistance;electrochemical impedance spectroscopy

scholarly journals Studies on the Development of New Efficient Corrosion Inhibitors for Crude Oil Pipelines: Electrochemical Impedance Spectroscopy Results for 1,8-Naphthyridines

2017 ◽  
Vol 57 (1) ◽  
Author(s):  
Rodolfo Álvarez-Manzo ◽  
Joel Mendoza-Canales ◽  
Salvador Castillo-Cervantes ◽  
Jesús Marín-Cruz
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Carbon Steel ◽  
Impedance Spectroscopy ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Fragmentation Pattern ◽  
Aliphatic Aldehydes ◽  
Oil Pipelines ◽  
Friedlander Synthesis

Five 1,8-naphthyridines were tested as corrosion inhibitors, including three non-previously reported 3-alkyl-1,8-naphthyridines. All were produced via the extended Friedländer synthesis, that for 3-alkyl-1,8-naphthyridines involves the earliest use of aliphatic aldehydes. Fragmentation pattern in MS for 3-alkyl-1,8-naphthyridines shows a remarkable parallel with that exhibited by 3-alkylpyridines. Electrochemical Impedance Spectroscopy (EIS) was used to assess the inhibiting properties of these compounds on samples of API X52 carbon steel pipelines immersed in oilfield-related water. Except for one of the molecules tested, the inhibition  efficiency (IE%) values were significantly higher than that calculated for a reference commercial inhibitor.

scholarly journals Novel pyrimidine-bichalcophene derivatives as corrosion inhibitors for copper in 1 M nitric acid solution

RSC Advances ◽  
2021 ◽  
Vol 11 (41) ◽  
pp. 25314-25333
Author(s):  
Mai A. Khaled ◽  
Mohamed A. Ismail ◽  
Ahmed. A. El-Hossiany ◽  
Abd El-Aziz S. Fouda
Keyword(s):  
Weight Loss ◽  
Electrochemical Impedance Spectroscopy ◽  
Nitric Acid ◽  
Impedance Spectroscopy ◽  
Acid Solution ◽  
Nitric Acid Solution ◽  
Potentiodynamic Polarization ◽  
Corrosion Inhibitors ◽  
Electrochemical Impedance ◽  
Pyrimidine Derivatives

This study targets the investigation of three pyrimidine derivatives (MA-1230, MA-1231, MA-1232) for the prevention of corrosion on copper in 1 M HNO3via weight loss (WL), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) techniques.

scholarly journals Cation Effect in the Corrosion Inhibition Properties of Coumarate Ionic Liquids and Acrylic UV-Coatings

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2611
Author(s):  
Esther Udabe ◽  
Anthony Sommers ◽  
Maria Forsyth ◽  
David Mecerreyes
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Polymer Coating ◽  
Corrosion Inhibitors ◽  
Electrochemical Impedance ◽  
Polymer Coatings

Chromate free corrosion inhibitors are searched for to mitigate the economic loss caused by mid-steel corrosion. Here, we show metal-free organic inhibitors having free coumarate anions that can be used either as direct corrosion inhibitors or incorporated into a polymer coating obtained by UV-curing. Four different ionic liquid monomers and polymer coatings with hexoxycoumarate anion and different polymerizable counter cations were investigated. Potentiodynamic polarization, electrochemical impedance spectroscopy, and surface analyses have verified their corrosion inhibition performance on a mild steel AS1020 surface. In the case of the coumarate ionic liquid monomers, the most promising inhibitor is the one coupled with the ammonium cation, showing an inhibition efficiency of 99.1% in solution followed by the imidazolium, pyridinium, and anilinium. Next, the ionic liquid monomers were covalently integrated into an acrylic polymer coating by UV-photopolymerization. In this case, the barrier effect of the polymer coating is combined with the corrosion inhibitor effect of the pendant coumarate anion. Here, the best polymer coatings are those containing 20% imidazolium and pyridinium cations, presenting a greater impedance in the EIS (Electrochemical Impedance Spectroscopy) measurements and less evidence of corrosion in the scribe tests. This article shows that the cationic moiety of coumarate based ionic liquids and poly(ionic liquid)s has a significant effect on their excellent corrosion inhibition properties for a mild steel surface exposed to aqueous chloride solutions.

Crevice Corrosion Behaviors of X52 Carbon Steel in Chloride Containing Solutions

2013 ◽  
Vol 652-654 ◽  
pp. 1432-1435
Author(s):  
Qian Hu ◽  
Jing Liu ◽  
Jie Zhang ◽  
Feng Huang ◽  
Xing Peng Guo
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Carbon Steel ◽  
Impedance Spectroscopy ◽  
Crevice Corrosion ◽  
Electrochemical Noise ◽  
Electrochemical Impedance ◽  
Corrosion Process ◽  
Nacl Solution ◽  
Concentration Difference ◽  
Corrosion Behaviors

The crevice corrosion behaviors of X52 carbon steel in two typical Cl--containing solutions were investigated by electrochemical noise and electrochemical impedance spectroscopy. Results show that oxygen concentration difference leads to the coupled current in NaCl + NaHCO3 solution while HAc concentration difference causes the coupled current in NaCl solution saturated with CO2 in the presence of HAc. There exists an apparent incubation stage during the crevice corrosion process of X52 carbon steel in the former. However, no obvious incubation period of crevice corrosion can be observed in the latter. Micrography shows that the crevice corrosion occurs indeed and the corrosion inside the crevice is not uniform.

Sign in / Sign up

Export Citation Format

Share Document