scholarly journals Morphological and in situ local refractive index change induced tuning of the optical properties of titania coated porous gold nanoparticles

2020 ◽  
Vol 128 (5) ◽  
pp. 054303
Author(s):  
Laura Juhász ◽  
Bence Parditka ◽  
Shenouda Shanda Shenouda ◽  
Misumi Kadoi ◽  
Kei-ichi Fukunaga ◽  
...  
2021 ◽  
Vol 566 ◽  
pp. 120893
Author(s):  
G. Shakhgildyan ◽  
L. Avakyan ◽  
M. Ziyatdinova ◽  
G. Atroshchenko ◽  
N. Presnyakova ◽  
...  

2017 ◽  
Vol 866 ◽  
pp. 370-374
Author(s):  
Supannee Learkthanakhachon ◽  
Suejit Pechprasarn ◽  
Manas Sangworasil ◽  
Michael G. Somekh ◽  
Naphat Albutt

We report a theoretical investigation of a surface plasmon resonance (SPR)-based acoustic sensor for optical detection of ultrasound. The structure being studied is arranged in the Krestchmann configuration and the detection is performed by observing the change of refractive index of water next to the SPR metal. The acoustic pressure is simulated using COMSOL. The simulation results illustrate an insight into mechanism of pressure variation on the surface of SPR sensor due to a constructive interference of the ultrasound. This leads to a local refractive index change of water. The local refractive index change is calculated by converting the incident pressure to water density using IAPWS-95 formulation. Then, the water density is converted to the refractive index using Lorentz-Lorenz formulation. Here we report the change in the refractive index of the water to pressure, dn/dp, which is calculated to be 1.4 x 10-10 Pa-1, which is very close to the dn/dp reported by M. W. Sigrist 1986. We also investigated the effect of temperature and wavelength on the dn/dp and found that the variation in temperature and wavelength does not show any significant effect on the dn/dp relationship. We also discuss the effect of quality factor (Q) and possible improvements to enhance the sensitivity of SPR-based acoustic sensor.


2001 ◽  
Vol 23 (4) ◽  
pp. 237-253 ◽  
Author(s):  
J. S. Hsu ◽  
Ming Rong Lee ◽  
K. F. Yarn

The effects of biaxial strain produced by the lattice mismatch of constituent materials on the optical properties of strainedIn1−xGaxAsyP1−y/In1−xGaxAsquantum well lasers are investigated.The optical gain and refractive index change of a biaxially stressed quantum well lasers are studied theoretically using the multiband effective mass equation (i.e.,k→⋅p→method), deformation potential theory and Fermi-Golden rule, band mixing effect is retained in the calculations. It is found that the biaxial strain would change the subband structures and optical properties of quantum well lasers, we found the gain of TE mode increases with increasing compressive strain, while the gain of TM mode increases with increasing tensile strain, these will be benefited for reducing the threshold current depending on whether the quantum well lasers are operating in TE or TM mode. On the other hand, the refractive index change in the active region near the TE(TM) mode peak gain becomes more negative when a biaxial compressive(tensile) strain is applied, it leads to the conclusion that the strain weakens the optical confinement, the temperature dependence of gain also becomes stronger when there is strain.Finally, we also found the minimum peak gain occurs when a small tensile strain is applied, but no strain.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Guangzhong Ma ◽  
Runli Liang ◽  
Zijian Wan ◽  
Shaopeng Wang

AbstractQuantification of molecular interactions on a surface is typically achieved via label-free techniques such as surface plasmon resonance (SPR). The sensitivity of SPR originates from the characteristic that the SPR angle is sensitive to the surface refractive index change. Analogously, in another interfacial optical phenomenon, total internal reflection, the critical angle is also refractive index dependent. Therefore, surface refractive index change can also be quantified by measuring the reflectivity near the critical angle. Based on this concept, we develop a method called critical angle reflection (CAR) imaging to quantify molecular interactions on glass surface. CAR imaging can be performed on SPR imaging setups. Through a side-by-side comparison, we show that CAR is capable of most molecular interaction measurements that SPR performs, including proteins, nucleic acids and cell-based detections. In addition, we show that CAR can detect small molecule bindings and intracellular signals beyond SPR sensing range. CAR exhibits several distinct characteristics, including tunable sensitivity and dynamic range, deeper vertical sensing range, fluorescence compatibility, broader wavelength and polarization of light selection, and glass surface chemistry. We anticipate CAR can expand SPR′s capability in small molecule detection, whole cell-based detection, simultaneous fluorescence imaging, and broader conjugation chemistry.


Sign in / Sign up

Export Citation Format

Share Document