Thermal characterization of insulating materials based on date palm particles and cardboard waste for use in thermal insulation building

This study focuses on the thermal characterization of porous gallium nitride (GaN) usingan extended 3ω method. Porous semiconductor materials provide a solution to the need for on-chipthermal insulation, a fundamental requirement for low-power, high-speed and high-accuracythermal sensors. Thermal insulation is especially important in GaN devices, due to the intrinsicallyhigh thermal conductivity of the material. The results show one order of magnitude reduction inthermal conductivity, from 130 W/mK to 10 W/mK, in line with theoretical predictions for porousmaterials. This achievement is encouraging in the quest for integrating sensors with opto-, powerandRF-electronics on a single GaN chip.

Download Full-text

Thermal characterization of date palm/epoxy composites with fillers from different parts of the tree

Journal of Materials Research and Technology ◽

10.1016/j.jmrt.2020.11.020 ◽

2020 ◽

Vol 9 (6) ◽

pp. 15537-15546

Author(s):

Othman Y. Alothman ◽

M. Jawaid ◽

K. Senthilkumar ◽

M. Chandrasekar ◽

Basheer A. Alshammari ◽

...

Keyword(s):

Date Palm ◽

Thermal Characterization ◽

Epoxy Composites ◽

Different Parts

Download Full-text

Processing and Characterization of Silicon Nitride Nanofiber Paper

Journal of Nanomaterials ◽

10.1155/2013/875361 ◽

2013 ◽

Vol 2013 ◽

pp. 1-7 ◽

Cited By ~ 3

Author(s):

Kei-Peng Jen ◽

Ronald Warzoha ◽

Ji Guo ◽

Michael Tang ◽

Sridhar Santhanam

Keyword(s):

Silicon Nitride ◽

Thermal Insulation ◽

Reduction Process ◽

Thermal Characterization ◽

Nitride Phase ◽

Mechanical Stiffness ◽

Precursor Material ◽

Processing Step

Papers of silicon nitride nanofibers were synthesized by a carbothermal reduction process. These nanofiber papers were synthesized in situ and did not require a secondary processing step. The process utilized silica nanopowders and silica gel as the precursor material. Processing geometry played a crucial role in regulating the growth of the nanofiber papers. Characterization of the nanofiber papers indicated that the nanofibers were of the alpha silicon nitride phase. Both mechanical stiffness and strength of the nanofiber papers were measured. Thermal conductivity and specific heat of the papers were also measured and were found to be lower than many common thermal insulation materials at much smaller thicknesses and were comparable to those values that are typically reported for carbon-nanotube-based buckypaper. Results of the mechanical and thermal characterization indicate that these silicon nitride nanofiber papers can be utilized for specialized thermal insulation applications.

Download Full-text

Thermal characterization of different graphite polystyrene

International Review of Applied Sciences and Engineering ◽

10.1556/1848.2018.9.2.12 ◽

2018 ◽

Vol 9 (2) ◽

pp. 163-168 ◽

Cited By ~ 8

Author(s):

Á. Lakatos ◽

I. Deák ◽

U. Berardi

Keyword(s):

Thermal Conductivity ◽

High Performance ◽

Thermal Characterization ◽

Expanded Polystyrene ◽

High Moisture ◽

Insulating Materials ◽

Insulation Materials ◽

Vacuum Insulation ◽

Study Laboratory

The development of high performance insulating materials incorporating nanotechnologies has enabled considerable decrease in the effective thermal conductivity. Besides the use of conventional insulating materials, such as mineral fibers, the adoption of new nano-technological materials such as aerogel, vacuum insulation panels, graphite expanded polystyrene, is growing. In order to reduce the thermal conductivity of polystyrene insulation materials, during the manufacturing, nano/micro-sized graphite particles are added to the melt of the polystyrene grains. The mixing of graphite flakes into the polystyrene mould further reduces the lambda value, since graphite parts significantly reflect the radiant part of the thermal energy. In this study, laboratory tests carried out on graphite insulation materials are presented. Firstly, thermal conductivity results are described, and then sorption kinetic curves at high moisture content levels are shown. The moisture up-taking behaviour of the materials was investigated with a climatic chamber where the relative humidity was 90% at 293 K temperature. Finally, calorific values of the samples are presented after combusting in a bomb calorimeter.

Download Full-text

Microstructural and Thermo-Physical Characterization of a Water Hyacinth Petiole for Thermal Insulation Particle Board Manufacture

Materials ◽

10.3390/ma12040560 ◽

2019 ◽

Vol 12 (4) ◽

pp. 560 ◽

Cited By ~ 5

Author(s):

Adela Salas-Ruiz ◽

María del Mar Barbero-Barrera ◽

Trinidad Ruiz-Téllez

Keyword(s):

Particle Size ◽

Thermal Insulation ◽

Water Hyacinth ◽

Eichhornia Crassipes ◽

Construction Material ◽

Chemical Characterization ◽

Thermal Characterization ◽

Particle Board ◽

Global Concern

Water Hyacinth (Eichhornia crassipes) is a dangerous and invasive aquatic species, of which global concern has sharply risen due to its rapid growth. Despite ample research on its possible applications in the construction field, there are no clear references on the optimal use of the plant in finding the most efficient-use building material. In this paper, a microstructural and chemical characterization of the Water Hyacinth petiole was performed, in order to find the most efficient use as a construction material. Subsequently, two types of binder-less insulation panels were developed, with two types of particle size (pulp and staple). A physical, mechanical, and thermal characterization of the boards was performed. These results demonstrated that it is possible to manufacture self-supporting Water Hyacinth petiole panels without an artificial polymer matrix for thermal insulation. The boards showed good thermal conductivity values, ranging from 0.047–0.065 W/mK. In addition, clear differences were found in the properties of the boards, depending on the type of Water Hyacinth petiole particle size, due to the differences in the microstructure.

Download Full-text

Thermal characterization of fibrous aerogel blanket

MATEC Web of Conferences ◽

10.1051/matecconf/201928201001 ◽

2019 ◽

Vol 282 ◽

pp. 01001 ◽

Cited By ~ 1

Author(s):

Ákos Lakatos ◽

Anton Trnik

Keyword(s):

Thermal Annealing ◽

Thermal Insulation ◽

Thermal Characterization ◽

Insulation Material ◽

Scanning Calorimetry ◽

Solid Materials ◽

Plastic Foams ◽

Isothermal Heat Treatments ◽

New Buildings

Nowadays, the application of thermal insulation materials both by the existing and by new buildings is one of the most important actions in order to reduce the energy loss of buildings. Besides the use of the conventional insulations (plastic foams and wool materials) aerogel is one of the most promising thermal insulation material. Aerogels, one of the lightest solid materials available today, are manufactured through the combination of a polymer with a solvent forming a gel. For buildings the fibre reinforced ones are the mainly used types. It is produced by adding the liquid-solid solution to the fibrous batting. In this paper changes in the thermal performance of the aerogel blanket will be followed after thermal annealing. The samples will be put under isothermal heat treatments at 70 °C for 6 weeks, as well as they will be put under thermal treatment at higher temperatures (from 70 °C till 210 °C) for 1 day. The changes in the thermal conductivity will be followed by Holometrix Lambda heat flow meter, as well as, Differential Scanning Calorimetry results will be presented. From the measured values, thermal properties will be calculated. In this paper we will try to clarify the role played by thermal annealing in thermal diffusivity.

Download Full-text