The influences of partial denture design on distribution of force to abutment teeth

2001 ◽  
Vol 85 (6) ◽  
pp. 527-539 ◽  
Author(s):  
Arthur R. Frechette
Keyword(s):  
Partial Denture ◽  
Abutment Teeth

scholarly journals Kombinasi hybrid prosthesis dengan precision attachment pada kasus mahkota klinis pendek Hybrid prosthesis combined with precision attachment to overcome clinically short crown

2013 ◽  
Vol 12 (2) ◽  
pp. 118
Author(s):  
Irene Melina ◽  
Soekobagiono Soekobagiono ◽  
Harry Laksono
Keyword(s):  
Clinical Success ◽  
Crown Height ◽  
Removable Partial Denture ◽  
Partial Denture ◽  
Hybrid Prosthesis ◽  
Abutment Teeth ◽  
Metal Frame

In the case of losing many teeth and the residual teeth have short clinical crown, design of the denture may hybriddenture. Hybrid denture is a removable partial denture with metal frame which have retention in the form ofprecision attachment. In short clinical crown, placement of crowns and the use of traction can be a problem,because there is no or lack of retention. In the manufacture of hybrid denture with precision attachment retention,using abutment with short clinical crowns is contraindicated. But in some literatures mentioned that the rest of theclinical crown height of not less than 2 mm can still be used as an abutment, but the abutments must be modified,such as making a longer preparation towards cervical edge. In several studies and literature, it is mentioned that toimprove the retention of the crown, the axial wall of abutment must be 4-6°. This article is aimed to report the clinical success of using the hybrid denture on abutment teeth which have short clinical crowns in a patient woman

scholarly journals Clinical Evaluation of the Effect of Implant-Supported and Implant Retained Distal Extension Removable Partial Dentures on the Supporting Structures

2021 ◽  
Vol 9 (D) ◽  
pp. 170-178
Author(s):  
Ragia Saad Mohamed Kotb ◽  
Ahmed Gamal Ahmed Hassan ◽  
Emad Mohamed Tolba M. Agamy ◽  
Gehan Fekry Mohamed
Keyword(s):  
Class I ◽  
Gingival Index ◽  
Removable Partial Denture ◽  
Partial Denture ◽  
Second Molar ◽  
Group I ◽  
Probing Depth ◽  
Significant Difference ◽  
Abutment Teeth ◽  
Supporting Structures

Objective: To evaluate and compare the effect of implant supported versus implant retained removable partial denture restoring Kennedy's class I cases on the supporting structures by measuring modified gingival index and probing depth for abutment teeth and implants. Subjects and Methods: Twelve patients; who had Kennedy class I mandibular partially edentulous ridge extending distal to the first or second premolar,   were selected from the outpatient clinic, Prosthodontics Department, Faculty of Dentistry, Minia University. The patients were classified into two equal groups; according to the implant superstructures either dome shaped abutment or ball and socket attachment.  Each Patient of both groups had two implants in second molar position (one in each side) and received removable partial denture of the same design. Patients were followed up for one year clinically. Group I: Six patients received RPD supported by dome shaped short abutments.  Group II six patients received RPD retained by ball and socket attachments. Results: Results revealed that, there was no statistically significant difference between the two groups regarding modified gingival index and probing depth around the abutment teeth and implant abutment. Conclusion:  The use of dome shaped abutment or ball and O-ring attachment have the same effect on gingival index and probing depth around natural abutments and implants in Kennedy class I mandibular situations.

scholarly journals Intraoral Repair of All Ceramic Fixed Partial Denture Utilizing Preimpregnated Fiber Reinforced Composite

2008 ◽  
Vol 02 (01) ◽  
pp. 63-68
Author(s):  
Süha Turkaslan ◽  
Arzu Tezvergil-Mutluay
Keyword(s):  
Complete Removal ◽  
Partial Denture ◽  
Fixed Partial Denture ◽  
Reinforced Composite ◽  
All Ceramic ◽  
Present Technique ◽  
Metal Ceramic ◽  
Abutment Teeth ◽  
Oral Method ◽  
Ceramic Restorations

ABSTRACTAll ceramic fixed partial dentures (FPD)s exhibit enhanced biocompatibility and esthetics as compared to metal-ceramic restorations. However, framework fractures are frequently reported especially when the connector dimensions are inadequate to withstand the high tensile stresses. The repair of the failed connector would be desirable rather than the complete removal and renewal since the latter is an expensive and time consuming procedure. Furthermore, the replacement or removal of the restoration for extra-oral repair purposes might increase the risk of destroying the entire restoration or damaging the abutment teeth during the removal. This article presents a direct intra-oral method that may be used to repair the connector fractures of all-ceramic FPDs which are otherwise clinically satisfactory. In the present technique, the connector is reconstructed intraorally utilizing composite resin restorative material reinforced with E-glass-fiber. (Eur J Dent 2008;2:63-68)

scholarly journals Maxillary removable partial denture combined with O’ring attachment implant: a case report

2018 ◽  
Author(s):  
Tiago Rebelo Costa ◽  
Cláudio Akira Yamaguchi ◽  
Alessandra Pucci Mantelli Galhardo ◽  
Roberto Chaib Stegun ◽  
Bruno Costa ◽  
...  
Keyword(s):  
Case Report ◽  
Oral Rehabilitation ◽  
Removable Partial Denture ◽  
Partial Denture ◽  
Aesthetic Result ◽  
First Choice ◽  
Abutment Teeth ◽  
Fixed Prosthesis ◽  
The Aesthetic ◽  
Systemic Health

Oral rehabilitation with free-end removable partial denture (RPD) is one of the major challenges in prosthodontic dentistry. The absence of a distal abutment produces undesirable RPD movement during masticatory function due to the high resilience of the residual ridge, which limits the denture efficiency and may damage the abutment teeth and bone over time. The advent of dental implants made possible to substitute the missing teeth with fixed implant-supported dentures as the first choice treatment to overcome such inconveniences. However, this indication may not be suitable for all patients due to financial, anatomical or systemic health conditions. Nevertheless it is possible to improve free extension RPD by using implants in the posterior edentulous ridge to achieve biological, biomechanical, physiological and social benefits. This article aims to present a case report on oral rehabilitation in which a RPD was made combined with an implant for posterior support in a sizeable edentulous ridge. The patient appreciated the retention improvement and the aesthetic result. The combination of a RPD with a posterior implant is an alternative treatment for cases in which implant-supported fixed prosthesis is not indicated, reducing the displacement and minimizing the limitations of the free-end devices.

Clinical evaluation of abutment teeth of removable partial denture by means of the Periotest method

2007 ◽  
Vol 34 (3) ◽  
pp. 222-227 ◽  
Author(s):  
J. H. JORGE ◽  
E. T. GIAMPAOLO ◽  
C. E. VERGANI ◽  
A. L. MACHADO ◽  
A. C. PAVARINA ◽  
...  
Keyword(s):  
Clinical Evaluation ◽  
Removable Partial Denture ◽  
Partial Denture ◽  
Abutment Teeth

scholarly journals Removable partial denture metal framework manufactured by selective laser melting technology – A clinical report

2021 ◽  
Vol 62 (2) ◽  
Author(s):  
Joana Cabrita ◽  
◽  
Teresa Mendes ◽  
João Martins ◽  
Luís Lopes ◽  
...  
Keyword(s):  
Selective Laser Melting ◽  
Clinical Report ◽  
Laser Melting ◽  
Removable Partial Denture ◽  
Partial Denture ◽  
Melting Technology ◽  
Metal Framework ◽  
Classic Technique ◽  
Abutment Teeth ◽  
And Function

The selective laser melting technology is an additive digital method that permits producing metal frameworks for removable partial dentures. The existing literature has compared this technique with the classic technique in terms of precision, quality of fit, and function. This work describes a clinical case of a metal framework produced by the selective laser melting technique in a patient rehabilitated with a removable partial denture. No adjustments were required when the metal framework was inserted, showing good adaptation and stability to the abutment teeth and surrounding tissues. Further studies are necessary for a significant assessment of this technique’s clinical applicability.

Sign in / Sign up

Export Citation Format

Share Document