CarbonNet progress towards a declaration of identified storage formation at the Pelican site with a new high-resolution 3D seismic dataset

2020 ◽  
Vol 60 (2) ◽  
pp. 718
Author(s):  
Nick Hoffman
Keyword(s):  
High Resolution ◽  
Greenhouse Gas ◽  
Oil And Gas ◽  
Co2 Storage ◽  
Gas Storage ◽  
Frequency Resolution ◽  
Seismic Survey ◽  
3D Seismic ◽  
Long Term Storage ◽  
Gippsland Basin

The CarbonNet project is making the first ever application for a ‘declaration of an identified greenhouse gas storage formation’ (similar to a petroleum location) under the Offshore Petroleum and Greenhouse Gas Storage Act. Unlike a petroleum location, however, there is no ‘discovery’ involved in the application. Instead, a detailed technical assessment is required of the geological suitability for successful long-term storage of CO2. The key challenges to achieving a successful application relate to addressing ‘fundamental suitability determinants’ under the act and regulations. At Pelican (Gippsland Basin), a new high-resolution 3D seismic survey and over 10 nearby petroleum wells (and over 1500 basinal wells) supplement a crestal well drilled in 1967 that proved the seal and reservoir stratigraphy. The GCN18A 3D marine seismic survey has the highest spatial and frequency resolution to date in the Gippsland Basin. The survey was acquired in water depths from 15 to 35 m with a conventional eight-streamer seismic vessel, aided by LiDAR bathymetry. The 12.5 m bin size and pre-stack depth migration with multiple tomographic velocity iterations have produced an unprecedented high-quality image of the Latrobe Group reservoirs and sealing units. The 3D seismic data provides excellent structural definition of the Pelican Anticline, and the overlying Golden Beach-1A gas pool is excellent. Depositional detail of reservoir-seal pairs within the Latrobe Group has been resolved, allowing a confident assessment of petroleum gas in place and CO2 storage opportunities. The CarbonNet project is progressing with a low-risk storage concept at intra-formational level, as proven by trapped pools at nearby oil and gas fields. Laterally extensive intra-formational shales provide seals across the entire structure, providing pressure and fluid separation between the overlying shallow hydrocarbon gas pool and the deeper CO2 storage opportunity. CarbonNet is assessing this storage opportunity and progressing towards a ‘declaration of an identified greenhouse gas storage formation’.

DEMETER HIGH RESOLUTION 3D SEISMIC SURVEY—REVITALISED DEVELOPMENT AND EXPLORATION ON THE NORTH WEST SHELF, AUSTRALIA

2006 ◽  
Vol 46 (1) ◽  
pp. 101 ◽  
Author(s):  
K.J. Bennett ◽  
M.R. Bussell
Keyword(s):  
High Resolution ◽  
Seismic Data ◽  
New Technologies ◽  
Seismic Survey ◽  
Future Application ◽  
3D Seismic ◽  
Gas Field ◽  
North West ◽  
The North ◽  
Exploration And Development

The newly acquired 3,590 km2 Demeter 3D high resolution seismic survey covers most of the North West Shelf Venture (NWSV) area; a prolific hydrocarbon province with ultimate recoverable reserves of greater than 30 Tcf gas and 1.5 billion bbls of oil and natural gas liquids. The exploration and development of this area has evolved in parallel with the advent of new technologies, maturing into the present phase of revitalised development and exploration based on the Demeter 3D.The NWSV is entering a period of growing gas market demand and infrastructure expansion, combined with a more diverse and mature supply portfolio of offshore fields. A sequence of satellite fields will require optimised development over the next 5–10 years, with a large number of wells to be drilled.The NWSV area is acknowledged to be a complex seismic environment that, until recently, was imaged by a patchwork of eight vintage (1981–98) 3D seismic surveys, each acquired with different parameters. With most of the clearly defined structural highs drilled, exploration success in recent years has been modest. This is due primarily to severe seismic multiple contamination masking the more subtle and deeper exploration prospects. The poor quality and low resolution of vintage seismic data has also impeded reservoir characterisation and sub-surface modelling. These sub-surface uncertainties, together with the large planned expenditure associated with forthcoming development, justified the need for the Demeter leading edge 3D seismic acquisition and processing techniques to underpin field development planning and reserves evaluations.The objective of the Demeter 3D survey was to re-image the NWSV area with a single acquisition and processing sequence to reduce multiple contamination and improve imaging of intra-reservoir architecture. Single source (133 nominal fold), shallow solid streamer acquisition combined with five stages of demultiple and detailed velocity analysis are considered key components of Demeter.The final Demeter volumes were delivered early 2005 and already some benefits of the higher resolution data have been realised, exemplified in the following:Successful drilling of development wells on the Wanaea, Lambert and Hermes oil fields and identification of further opportunities on Wanaea-Cossack and Lambert- Hermes;Dramatic improvements in seismic data quality observed at the giant Perseus gas field helping define seven development well locations;Considerably improved definition of fluvial channel architecture in the south of the Goodwyn gas field allowing for improved well placement and understanding of reservoir distribution;Identification of new exploration prospects and reevaluation of the existing prospect portfolio. Although the Demeter data set has given significant bandwidth needed for this revitalised phase of exploration and development, there remain areas that still suffer from poor seismic imaging, providing challenges for the future application of new technologies.

PESA Australian exploration review 2018

2019 ◽  
Vol 59 (2) ◽  
pp. 493
Author(s):  
D. Lockhart ◽  
D. Spring
Keyword(s):  
Oil And Gas ◽  
Petroleum Exploration ◽  
3D Seismic ◽  
The North ◽  
Second Year ◽  
Gippsland Basin ◽  
2D And 3D ◽  
Conventional Oil ◽  
Exploration Activity ◽  
Offshore Petroleum

Available data for 2018 indicates that exploration activity is on the rise in Australia, compared to 2017, and this represents a second year of growth in exploration activity in Australia. There has been an increase in area under licence by 92 000 km2, reversing the downward trend in area under licence that commenced in 2014. Since 2016, exploratory drilling within Australia has seen a continued upward trend in both the number of wells drilled and the percentage of total worldwide. Onshore, 77 conventional exploration and appraisal wells were spudded during the year. Offshore, exploration and appraisal drilling matched that seen in 2017, with five new wells spudded: two in the Roebuck Basin, two in the Gippsland Basin and one in the North Carnarvon Basin. Almost 1500 km of 2D seismic and over 10 000 km2 of 3D seismic were acquired within Australia during 2018, accounting for 2.4% and 3.9% of global acquisition, respectively. This represents an increase in the amount of both 2D and 3D seismic acquired in Australia compared with 2017. Once the 2017 Offshore Petroleum Acreage Release was finalised, seven new offshore exploration permits were awarded as a result. A total of 12 bids were received for round one of the 2018 Offshore Petroleum Exploration Release, demonstrating an increase in momentum for offshore exploration in Australia. The permits are in Commonwealth waters off Western Australia, Victoria and the Ashmore and Cartier islands. In June 2018, the Queensland Government announced the release of 11 areas for petroleum exploration acreage in onshore Queensland, with tenders closing in February/March 2019; a further 11 areas will be released in early 2019. The acreage is a mix of coal seam gas and conventional oil and gas. Victoria released five areas in the offshore Otway Basin within State waters. In the Northern Territory, the moratorium on fracking was lifted in April, clearing the way for exploration to recommence in the 2019 dry season. With the increase in exploration has come an increase in success, with total reserves discovered within Australia during 2018 at just under 400 million barrels of oil equivalent, representing a significant increase from 2017. In 2018, onshore drilling resulted in 18 new discoveries, while offshore, two new discoveries were made. The most notable exploration success of 2018 was Dorado-1 drilled in March by Quadrant and Carnarvon Petroleum in the underexplored Bedout Sub-basin. Dorado is the largest oil discovery in Australia of 100 million barrels, or over, since 1996 and has the potential to reinvigorate exploration in the region.

The Latrobe Group and the 90-million-year beach

2013 ◽  
Vol 53 (2) ◽  
pp. 460
Author(s):  
Nick Hoffman ◽  
Natt Arian
Keyword(s):  
Sea Level ◽  
Co2 Storage ◽  
Hydrocarbon Exploration ◽  
Petroleum Exploration ◽  
3D Seismic ◽  
Fluvial Systems ◽  
Detailed Understanding ◽  
Marine Embayment ◽  
Gippsland Basin ◽  
Lake Systems

Carbon dioxide geosequestration requires a detailed understanding of the whole sedimentary section, with particular emphasis on topseals and intraformational seals. Hydrocarbon exploration is more focused on reservoirs but requires a similar basin understanding. This extended abstract reviews the knowledge gained from petroleum exploration in the Gippsland Basin to The CarbonNet Project’s exploration program for CO2 storage. The Ninety Mile Beach on the Gippsland coast is a prominent modern-day sand fairway where longshore drift transports sediments north-eastwards along a barrier-bar system, trapping lake systems behind the coastal strip. This beach is only 10,000 years old (dating to the last glacial rise of sea level) but is built on a platform of earlier beaches that can be traced back almost 90 million years to the initiation of Latrobe Group deposition in the Gippsland Basin. Using a recently compiled and open-file volume of merged 3D seismic surveys, the authors show the evolution of the Latrobe shoreline can be mapped continuously from the Upper Cretaceous to the present day. Sand fairways accumulate as a barrier-bar system at the edge of a steadily subsiding marine embayment, with distinct retrogradational geometries. Behind the barrier system, a series of trapped lakes and lagoons are mapped. In these, coal swamps, extensive shales, and tidal sediments were deposited at different stages of the sea-level curve, while fluvial systems prograded through these lowlands. Detailed 3D seismic extractions show the geometry, orientation and extent of coals, sealing shales, fluvial channels, and bayhead deltas. Detailed understanding of these reservoir and seal systems outlines multi-storey play fairways for hydrocarbon exploration and geosequestration. Use of modern basin resource needs careful coordination of activity and benefits greatly from established data-sharing practices.

THE YELLOWTAIL OIL DISCOVERY

1983 ◽  
Vol 23 (1) ◽  
pp. 170
Author(s):  
A. R. Limbert ◽  
P. N. Glenton ◽  
J. Volaric
Keyword(s):  
Oil Recovery ◽  
Seismic Data ◽  
Joint Venture ◽  
Seismic Survey ◽  
3D Seismic ◽  
Well Control ◽  
Reservoir Volume ◽  
3D Data ◽  
Small Feature ◽  
Gippsland Basin

The Esso/Hematite Yellowtall oil discovery is located about 80 km offshore in the Gippsland Basin. It is a small accumulation situated between the Mackerel and Kingfish oilfields. The oil is contained in Paleocene Latrobe Group sandstones, and sealed by the calcareous shales and siltstones of the Oligocene to Miocene Lakes Entrance Formation. Structural movement and erosion have combined to produce a low relief closure on the unconformity surface at the top of the Latrobe Group.The discovery well, Yellowtail-1, was the culmination of an exploration programme initiated during the early 1970's. The early work involved the recording and interpretation of conventional seismic data and resulted in the drilling of Opah- 1 in 1977. Opah-1 failed to intersect reservoir- quality sediments within the interpreted limits of closure although oil indications were encountered in a non-net interval immediately below the top of the Latrobe Group. In 1980 the South Mackerel 3D seismic survey was recorded. The interpretation of these 3D data in conjunction with the existing well control resulted in the drilling of Yellowtail-1 and subsequently led to the drilling of Yellowtail-2.In spite of the intensive exploration to which this small feature has been subjected, the potential for its development remains uncertain. Technical factors which affect the viability of a Yellowtail development are:The low relief of the closure makes the reservoir volume highly sensitive to depth conversion of the seismic data.The complicated velocity field makes precise depth conversion difficult.The thin oil column reduces oil recovery efficiency.The detailed pattern of erosion at the top of the Latrobe Group may be beyond the resolution capability of 3D seismic data.The 3D seismic data may not be capable of defining the distribution of the non-net intervals within the trap.The large anticlinal closures and topographic highs in the Gippsland Basin have been drilled, and the prospects that remain are generally small or high risk. Such exploration demands higher technology in the exploration stage and more wells to define the discoveries, and has no guarantee of success. The Yellowtail discovery is an illustration of one such prospect that the Esso/Hematite joint venture is evaluating.

High‐resolution 3D seismic survey applying effective acquisition and new processing strategies

2001 ◽  
Author(s):  
Roman Spitzer ◽  
Frank O. Nitsche ◽  
Alan G. Green ◽  
Heinrich Horstmeyer
Keyword(s):  
High Resolution ◽  
Seismic Survey ◽  
3D Seismic ◽  
Processing Strategies ◽  
New Processing

Facies Evolution and Distribution of Subaqueous Fans Complex in Biyang Sag, Eastern China

2013 ◽  
Vol 868 ◽  
pp. 168-171
Author(s):  
Xiao Jie Geng ◽  
Chang Song Lin ◽  
Xiao Min Zhu ◽  
Yan Lei Dong ◽  
Qi Luo
Keyword(s):  
Complex System ◽  
High Resolution ◽  
Oil And Gas ◽  
Eastern China ◽  
Seismic Profile ◽  
Gas Storage ◽  
Coarse Grained ◽  
Oil And Gas Exploration ◽  
The Third ◽  
Spectrum Decomposition

Hetaoyuan formation of Palaeogene in Biyang sag experienced the process of sedimentation during the main depressing period. Lithological traps were formed by the Sandstone-conglomerate bodies as favorite targets for oil and gas exploration in the southeast of Biyang sag. In this study, seismic profile, cores and well loggings as main data are used to analyze the micro-facies of subaqueous fan complex system. Methods such as Phasing concertion, spectrum decomposition, and strata slice play important roles in the study of facies evolution and distribution in high-resolution sequence framework of the upper member of the third Hetaoyuan formation. Subsequently, All of the coarse-grained turbid sandstone and the distributary channels sediments are potential reservoirs for oil and gas storage.

Sign in / Sign up

Export Citation Format

Share Document