Abstract: A High Resolution 3D Seismic Survey Using 55 x 55 Feet Bin Size in Osage County, OK to Delineate Details of of Structure, Stratigraphy and Subtle Lithologic Variations

AAPG Bulletin ◽  
1998 ◽  
Vol 82 ◽  
Author(s):  
SHARMA, B., T.K. REEVES, W.I. JOHNS
2006 ◽  
Vol 46 (1) ◽  
pp. 101 ◽  
Author(s):  
K.J. Bennett ◽  
M.R. Bussell

The newly acquired 3,590 km2 Demeter 3D high resolution seismic survey covers most of the North West Shelf Venture (NWSV) area; a prolific hydrocarbon province with ultimate recoverable reserves of greater than 30 Tcf gas and 1.5 billion bbls of oil and natural gas liquids. The exploration and development of this area has evolved in parallel with the advent of new technologies, maturing into the present phase of revitalised development and exploration based on the Demeter 3D.The NWSV is entering a period of growing gas market demand and infrastructure expansion, combined with a more diverse and mature supply portfolio of offshore fields. A sequence of satellite fields will require optimised development over the next 5–10 years, with a large number of wells to be drilled.The NWSV area is acknowledged to be a complex seismic environment that, until recently, was imaged by a patchwork of eight vintage (1981–98) 3D seismic surveys, each acquired with different parameters. With most of the clearly defined structural highs drilled, exploration success in recent years has been modest. This is due primarily to severe seismic multiple contamination masking the more subtle and deeper exploration prospects. The poor quality and low resolution of vintage seismic data has also impeded reservoir characterisation and sub-surface modelling. These sub-surface uncertainties, together with the large planned expenditure associated with forthcoming development, justified the need for the Demeter leading edge 3D seismic acquisition and processing techniques to underpin field development planning and reserves evaluations.The objective of the Demeter 3D survey was to re-image the NWSV area with a single acquisition and processing sequence to reduce multiple contamination and improve imaging of intra-reservoir architecture. Single source (133 nominal fold), shallow solid streamer acquisition combined with five stages of demultiple and detailed velocity analysis are considered key components of Demeter.The final Demeter volumes were delivered early 2005 and already some benefits of the higher resolution data have been realised, exemplified in the following:Successful drilling of development wells on the Wanaea, Lambert and Hermes oil fields and identification of further opportunities on Wanaea-Cossack and Lambert- Hermes;Dramatic improvements in seismic data quality observed at the giant Perseus gas field helping define seven development well locations;Considerably improved definition of fluvial channel architecture in the south of the Goodwyn gas field allowing for improved well placement and understanding of reservoir distribution;Identification of new exploration prospects and reevaluation of the existing prospect portfolio. Although the Demeter data set has given significant bandwidth needed for this revitalised phase of exploration and development, there remain areas that still suffer from poor seismic imaging, providing challenges for the future application of new technologies.


2020 ◽  
Vol 60 (2) ◽  
pp. 718
Author(s):  
Nick Hoffman

The CarbonNet project is making the first ever application for a ‘declaration of an identified greenhouse gas storage formation’ (similar to a petroleum location) under the Offshore Petroleum and Greenhouse Gas Storage Act. Unlike a petroleum location, however, there is no ‘discovery’ involved in the application. Instead, a detailed technical assessment is required of the geological suitability for successful long-term storage of CO2. The key challenges to achieving a successful application relate to addressing ‘fundamental suitability determinants’ under the act and regulations. At Pelican (Gippsland Basin), a new high-resolution 3D seismic survey and over 10 nearby petroleum wells (and over 1500 basinal wells) supplement a crestal well drilled in 1967 that proved the seal and reservoir stratigraphy. The GCN18A 3D marine seismic survey has the highest spatial and frequency resolution to date in the Gippsland Basin. The survey was acquired in water depths from 15 to 35 m with a conventional eight-streamer seismic vessel, aided by LiDAR bathymetry. The 12.5 m bin size and pre-stack depth migration with multiple tomographic velocity iterations have produced an unprecedented high-quality image of the Latrobe Group reservoirs and sealing units. The 3D seismic data provides excellent structural definition of the Pelican Anticline, and the overlying Golden Beach-1A gas pool is excellent. Depositional detail of reservoir-seal pairs within the Latrobe Group has been resolved, allowing a confident assessment of petroleum gas in place and CO2 storage opportunities. The CarbonNet project is progressing with a low-risk storage concept at intra-formational level, as proven by trapped pools at nearby oil and gas fields. Laterally extensive intra-formational shales provide seals across the entire structure, providing pressure and fluid separation between the overlying shallow hydrocarbon gas pool and the deeper CO2 storage opportunity. CarbonNet is assessing this storage opportunity and progressing towards a ‘declaration of an identified greenhouse gas storage formation’.


2001 ◽  
Author(s):  
Roman Spitzer ◽  
Frank O. Nitsche ◽  
Alan G. Green ◽  
Heinrich Horstmeyer

Author(s):  
P. Steeghs ◽  
V.P. Vandeweijer ◽  
J.A.C. Meekes ◽  
B.F. Paap ◽  
M.P.E. de Kleine

Author(s):  
P. Steeghs ◽  
V.P. Vandeweijer ◽  
C.C. Mosher ◽  
L. Ji ◽  
M.P.E. de Kleine

2018 ◽  
Vol 71 (0) ◽  
pp. 33-42
Author(s):  
Shigeru Ino ◽  
Shigeyuki Suda ◽  
Hidekuni Kikuchi ◽  
Shiro Ohkawa ◽  
Shintaro Abe ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document