Cluster Chemistry. XLVII. X-Ray Crystal Structure of OsPt2(μ-CO)3(CO)2(PPh3)3

1986 ◽  
Vol 39 (12) ◽  
pp. 2145 ◽  
Author(s):  
MI Bruce ◽  
MR Snow ◽  
ERT Tiekink

The crystal structure of OsPt2(μ-CO)3(CO)2(PPh3)3 has been determined by single-crystal X-ray diffraction techniques. Crystals are triclinic, space group Pī with unit cell dimensions a 13.593(4), b 15.839(4), c 12.633(8) Ǻ, α 102.97(3), β 108.18(2), γ 84.86(3)° with Z2. The structure was refined by a full-matrix least-squares procedure on 5896 reflections [I ≥ 2.5σ(I)] to final R 0.028 and Rw 0.034. A triphenylphosphine ligand binds each of the metal atoms disposed at the corners of a triangle. Each metal-metal bond is spanned by a bridging carbonyl group. The coordination about the osmium atom is completed by two terminal carbonyl groups.


2011 ◽  
Vol 6 (11) ◽  
pp. 1934578X1100601
Author(s):  
Yang Li ◽  
Jun-Hui Zhou ◽  
Gui-Jun Han ◽  
Min-Juan Wang ◽  
Wen-Ji Sun ◽  
...  

The crystal structure of natural diterpenoid alkaloid ranaconitine isolated from Aconitum sinomontanum Nakai has been determined by single crystal X-ray diffraction analysis. The crystal presents a monoclinic system, space group C2 with Z = 4, unit cell dimensions a = 30.972(19) Å, b = 7.688(5) Å, and c = 19.632(12) Å. Moreover, the intermolecular O–H···O hydrogen bonds and weak π-π interactions play a critical role in expanding the dimensionality.



1987 ◽  
Vol 65 (12) ◽  
pp. 2830-2833 ◽  
Author(s):  
David M. McKinnon ◽  
Peter D. Clark ◽  
Robert O. Martin ◽  
Louis T. J. Delbaere ◽  
J. Wilson Quail

3,5-Diphenyl-1,2-dithiolium-4-olate (1) reacts with aniline to form 1-phenylimino-2-phenylamino-3-phenylindene (3a). Under suitable conditions, 6-phenylbenzo[b]indeno[1,2-e]-1,2-thiazine is also formed. These structures are confirmed by alternative syntheses. The molecular structure of 3a has been determined by single crystal X-ray diffraction. Compound 3a crystallizes in the monoclinic space group C2/c with unit cell dimensions a = 20.777(3) Å, b = 6.130(3) Å, c = 31.327(3) Å, 3 = 99.59(1)°, and Z = 8. The structure was solved by direct methods and refined by least squares to a final R = 0.055. The molecular structure of 3a shows the three phenyl containing substituents to have the planes of their ring systems tilted between 40° and 60° from the plane of the indene system due to steric repulsions.



2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Ataf A. Altaf ◽  
Adnan Shahzad ◽  
Zarif Gul ◽  
Sher A. Khan ◽  
Amin Badshah ◽  
...  

1,3-Diisobutyl thiourea was synthesized and characterized by single crystal X-ray diffraction. It gives a monoclinic (α=γ= 90 andβ  ≠90) structure with the space group P21/c. The unit cell dimensions area= 11.5131 (4) Å,b= 9.2355 (3) Å,c= 11.3093 (5) Å,α= 90°,β= 99.569° (2),γ= 90°,V= 1185.78 (8) Å3, andZ= 4. The crystal packing is stabilized by intermolecular (N–H⋯S) hydrogen bonding in the molecules. The optimized geometry and Mullikan's charges of the said molecule calculated with the help of DFT using B3LYP-6-311G model support the crystal structure.



1999 ◽  
Vol 52 (10) ◽  
pp. 949 ◽  
Author(s):  
Martin A. Bennett ◽  
Glen B. Robertson ◽  
Pramesh N. Kapoor

Reaction of the cyclohexyne–platinum(0) complex [Pt(η2-C6H8)(Cy2PCH2CH2PCy2)]* with water and CO2 in the presence of triphenylphosphine gives the bicarbonate salt of the (η1-cyclohexenyl)platinum(II) cation, [Pt(η1-C6H9)(Cy2PCH2CH2 PCy2)(PPh3)] [HCO3] · 3H2O, which has been characterized by n.m.r. spectroscopy and single-crystal X-ray diffraction at low temperature. Crystals are triclinic, space group P1– with unit cell dimensions a 20.315(2), b 12.782(1), c 10.694(1) Å, α 66.61(1), β 104.73(1), γ 102.11(1)˚, and Z 2. The structure was refined to a final R value of 0.036 with use of 7553 reflections [I > 3σ(I)]. The cation has the expected, somewhat distorted planar coordination geometry; the anion consists of discrete, hydrogen-bonded dimers [(HCO3)(H2O)3]22-.



1992 ◽  
Vol 70 (3) ◽  
pp. 900-909 ◽  
Author(s):  
Claude Leblanc ◽  
François Brisse

Model compounds of the poly(oligomethylene thioterephthalates) have been synthesized and characterized by X-ray diffraction analyses. The pink n-methylenedithiobenzoates, obtained for n = 3, 5, 7, and 9, all have a low melting point of about 320–330 K. They all crystallize in the monoclinic system, space group P21/c. The a and b unit cell dimensions vary little while the c dimension increases monotonically as n changes from 3 to 9. The crystal structure of the four compounds were established from low-temperature X-ray intensities. Except for the lengthening of the methylenic sequence, the four molecules studied here are isostructural. One of the thiobenzoate groups of the molecules is coplanar with all the methylenic carbons, while the other thiobenzoate group is at 90° from the above plane of atoms. The methylenic sequence has the same conformation. It may be described by g+(t)n, where n is the number of methylene groups. Thus, the four compounds belong to a crystallographically homologous series. The molecules form centrosymmetric "dimers," which, in turn, are herring-bone packed in their respective unit cells. In each "dimmer" two aromatic rings are across from one another while being mutually perpendicular. On the basis of the above results, one proposes three potentially acceptable structures for the parent poly(oligomethylene thioterephthalates). Keywords: dithiobenzoate, methylene sequence, crystal structure, poly(oligomethylene thioterephthalate).



2006 ◽  
Vol 21 (3) ◽  
pp. 210-213 ◽  
Author(s):  
Mohamed Chakir ◽  
Abdelaziz El Jazouli ◽  
Jean-Pierre Chaminade

A new Nasicon phosphates series [Na3+xCr2−xCox(PO4)3(0⩽x⩽1)] was synthesized by a coprecipitation method and structurally characterized by powder X-ray diffraction. The selected compound Na3.5Cr1.5Co0.5(PO4)3 (x=0.5) crystallizes in the R3c space group with the following hexagonal unit-cell dimensions: ah=8.7285(3) Å, ch=21.580(2) Å, V=1423.8(1) Å3, and Z=6. This three-dimensional framework is built of PO4 tetrahedra and Cr∕CoO6 octahedra sharing corners. Na atoms occupy totally M(1) sites and partially M(2) sites.



2006 ◽  
Vol 70 (1) ◽  
pp. 115-121 ◽  
Author(s):  
R. P. Liferovich ◽  
R. H. Mitchell

AbstractA synthetic analogue, Ca(Ti0.6Al0.2Ta0.16Nb0.04)OSiO4, of an aluminoan tantalian titanite previously described from Craveggia pegmatite (Piemonte, Italy) has been prepared by a ceramic synthesis technique and its crystal structure determined by Rietveld analysis of the powder X-ray diffraction pattern. The synthetic Al-Ta-Nb-rich titanite adopts space group A2/a implying that substitutions at the single octahedral site destroy the coherence of the off-centering of octahedral chains in the titanite structure resulting in a P21/a → A2/a phase transition. Unit-cell dimensions obtained for the Al-Ta-Nb-rich titanite are: a = 7.0649(1) Å; b = 8.7187(1) Å; c = 6.5701(1) Å; β = 113.755(1)°, V = 370.41(1) Å3. The extensive replacement of Ti by Al, Ta and Nb results in a considerable decrease in the distortion of all coordination polyhedra in the structure of this titanite. These structural data suggest that a solid solution CaTi1-x(Alx/2 [Ta,Nb]x/2)OSiO4 (0 ≤ x ≤ 0.4) adopting the titanite structure might exist.



1994 ◽  
Vol 47 (4) ◽  
pp. 577 ◽  
Author(s):  
PD Cookson ◽  
ERT Tiekink ◽  
MW Whitehouse

A series of complexes of the general formulae R3PAu(6-mp), R3P = Et3P, Ph3P, Cy3P, PhMe2P, (o-tol)3P, (m-tol)3P or (p-tol)3P, (AuCl)Ph2P(CH2)nPPh2(Au(6-mp)), n = 2 or 3, and Ph2P(CH2)nPPh2(Au(6-mp))2, n = 1, 2 or 3 and 6-mp is the anion derived from 6-mercaptopurine (purine-6-thiol), have been prepared and characterized by spectroscopic methods (i.r., 1H, 13C, 31P n.m.r. and f.a.b. m.s.) and, in the case of the Ph3PAu(6-mp) complex, by single-crystal X-ray diffraction methods. The spectroscopic data show that the 6-mp ligand coordinates as a thiolate ligand and that the gold atoms exist in linear P-Au-S (or P-Au-Cl) geometries. This has been confirmed by an X-ray study on Ph3PAu(6-mp), isolated as an ethanol solvate; the study shows the gold atom to be linearly coordinated by the phosphorus and sulfur atoms: Au-P(1) 2.237(2), Au-S(6) 2.287(1) Ǻ and P-Au-S 173.71(6)°. Crystals of Ph3PAu(6-mp).EtOH are triclinic, space group Pī, with unit cell dimensions a 11.066(3), b 13.552(3), c 8.705(2) Ǻ, α 91.51(2), β 113.06(2), γ 89.69(2)°, V 1200.8(5) Ǻ3, Z 2. The structure was refined by a full-matrix least-squares procedure to R 0.034 for 3978 reflections with I ≥ 3.0σ(I). Preliminary results of testing for antiarthritic activity among the new complexes in rats are also reported showing that some of them are more potent/less toxic than current gold(I) thiolates used clinically.



2005 ◽  
Vol 61 (6) ◽  
pp. 717-723 ◽  
Author(s):  
Patricia Lozano-Casal ◽  
David R. Allan ◽  
Simon Parsons

The crystal structure of cyclopropylamine at 1.2 GPa has been determined by X-ray diffraction methods. The structure of this phase is orthorhombic, space group Pbca and the unit-cell dimensions are a =  5.0741 (10), b  =  9.7594 (10) and c  =  13.305 (2) Å. Only one of the two H atoms of the amino group actively participates in the formation of the hydrogen-bonded chains, C(2) in graph-set notation, which lie parallel to the crystallographic a axis. Additionally, the topology of the crystal packing is studied using both Voronoi–Dirichlet polyhedra and Hirshfeld surface analyses for the low-temperature and the high-pressure structures of cyclopropylamine and the results are compared.



2005 ◽  
Vol 3 (4) ◽  
pp. 780-791 ◽  
Author(s):  
Aamer Saeed ◽  
Masood Parvez

Abstract1-(4-Chlorophenyl)-3-(4-methylbenzoyl)thiourea was synthesized and characterized by IR,1H and 13C NMR, mass spectroscopy and the elemental analysis. The crystal structure was confirmed from single crystal X-ray diffraction data. It crystallizes in the monoclinic space group P21/c with unit cell dimensions a=12.038(3), b=6.330(6), c=18.912(5) Å and β=100.32(3)°. There is a strong intramolecular hydrogen bond of the type N−H...O, with distance N1...O1=2.659(3) Å. The structure is composed of dimers related by inversion centers. The dimers are formed by intermolecular interactions of the type N−H...S with N...S separation of 3.440(2) Å. The mass fragmentation pattern has also been discussed.



Sign in / Sign up

Export Citation Format

Share Document