In a known display cell with the nematic liquid crystal (NLC) and interdigital electrodes on one of the glass substrates, the “In-Plane Switching” (IPS) mode is implemented, in which the NLC main optical axis reorients in a plane parallel to substrates, providing the most correct color reproduction at different angles view, up to 178 ° horizontally and vertically. Unfortunately, the creation of interdigital metal electrodes complicates and increases the technological process cost and causes a decrease in image contrast. At the same time, experimental results and calculations based on classical electro-optics of crystals indicate that electrooptical switching in the IPS mode is a natural and intrinsic feature of a conventional (with continuous electrodes) display cell with a planar-oriented layer of the ferroelectric liquid crystal (FLC), in which the effect of the deformed (by the electric field) helix FLC nanostructure is realized (DHF effect). In such a cell, the reorientation of the main optical axis under the influence of a weak electric field also occurs in the substrate plane if the FLC has a small pitch (about 100 nm or less) and a large tilt angle of molecules in the layer (about 38 ° or more). The dependences of the FLC cell light transmittance measured in this work, confirmed the achievement of the IPS electro-optical mode in the DHF FLC cell; moreover, the light modulation frequency was 1 kHz. Thus, while maintaining all the advantages of the IPS mode known in NLC, its implementation in FLC allows additionally obtaining technological advantages and multiple increase in modulation frequency.
21Ne and 131Xe NMR study of electric field gradients and multinuclear NMR study of the composition of a ferroelectric liquid crystal
