A study on the early-stage decomposition in the Al–Mg–Si–Cu alloy AA6111 by electrical resistivity and three-dimensional atom probe

Author(s):  
S. Esmaeili ◽  
D. Vaumousse ◽  
M. W. Zandbergen ◽  
W. J. Poole ◽  
A. Cerezo ◽  
...  
2005 ◽  
Vol 475-479 ◽  
pp. 357-360 ◽  
Author(s):  
Shoichi Hirosawa ◽  
Tatsuo Sato

The formation of nano-scale clusters (nanoclusters) prior to the precipitation of the strengthening b” phase significantly influences two-step aging behavior of Al-Mg-Si alloys. In this work, the existence of two kinds of nanoclusters has been verified in the early stage of phase decomposition by differential scanning calorimetry (DSC) and three-dimensional atom probe (3DAP). Pre-aging treatment at 373K before natural aging was also found to form preferentially one of the two nanoclusters, resulting in the remarkable restoration of age-hardenability at paint-bake temperatures. Such microstructural control by means of optimized heat-treatments; i.e. nanocluster assist processing (NCAP), possesses great potential for enabling Al-Mg-Si alloys to be used more widely as a body-sheet material of automobiles.


2018 ◽  
Vol 25 (2) ◽  
pp. 447-453 ◽  
Author(s):  
Yongjie Zhang ◽  
Goro Miyamoto ◽  
Tadashi Furuhara

AbstractThe composition of nano-sized alloy carbides formed by interphase precipitation in V–Nb and V–Ti multiple microalloyed low-carbon steels is analyzed by using three-dimensional atom probe. Carbide-forming alloying elements including V, Nb, and Ti, are simultaneously precipitated from the early stage of isothermal treatment, whose atoms are uniformly distributed in the carbide particles, even after prolonged holding. Cluster analysis by the maximum separation method, with parameters optimized using different methods, is carried out to extract alloy carbides from matrix. The composition of alloy carbides evaluated by site fraction of substitutional carbide-forming alloying elements indicates that at the early stage of their formation, Nb and Ti are more strongly enriched than V.


2011 ◽  
Vol 111 (6) ◽  
pp. 690-694 ◽  
Author(s):  
P.A. Rometsch ◽  
L.F. Cao ◽  
X.Y. Xiong ◽  
B.C. Muddle

1987 ◽  
Vol 48 (C6) ◽  
pp. C6-349-C6-354
Author(s):  
K. Hono ◽  
T. Sakurai ◽  
H. W. Pickering

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Annarita Perillo ◽  
Valeria Landoni ◽  
Alessia Farneti ◽  
Giuseppe Sanguineti

Abstract Purpose The purpose of this study is to evaluate inter- and intra-fraction organ motion as well as to quantify clinical target volume (CTV) to planning target volume (PTV) margins to be adopted in the stereotactic treatment of early stage glottic cancer. Methods and materials Stereotactic body radiotherapy (SBRT) to 36 Gy in 3 fractions was administered to 23 patients with early glottic cancer T1N0M0. Patients were irradiated with a volumetric intensity modulated arc technique delivered with 6 MV FFF energy. Each patient underwent a pre-treatment cone beam computed tomography (CBCT) to correct the setup based on the thyroid cartilage position. Imaging was repeated if displacement exceeded 2 mm in any direction. CBCT imaging was also performed after each treatment arc as well as at the end of the delivery. Swallowing was allowed only during the beam-off time between arcs. CBCT images were reviewed to evaluate inter- and intra-fraction organ motion. The relationships between selected treatment characteristics, both beam-on and delivery times as well as organ motion were investigated. Results For the population systematic (Ʃ) and random (σ) inter-fraction errors were 0.9, 1.3 and 0.6 mm and 1.1, 1.3 and 0.7 mm in the left-right (X), cranio-caudal (Y) and antero-posterior (Z) directions, respectively. From the analysis of CBCT images acquired after treatment, systematic (Ʃ) and random (σ) intra-fraction errors resulted 0.7, 1.6 and 0.7 mm and 1.0, 1.5 and 0.6 mm in the X, Y and Z directions, respectively. Margins calculated from the intra-fraction errors were 2.4, 5.1 and 2.2 mm in the X, Y and Z directions respectively. A statistically significant difference was found for the displacement in the Z direction between patients irradiated with > 2 arcs versus ≤ 2 arcs, (MW test, p = 0.038). When analyzing mean data from CBCT images for the whole treatment, a significant correlation was found between the time of delivery and the three dimensional displacement vector (r = 0.489, p = 0.055), the displacement in the Y direction (r = 0.553, p = 0.026) and the subsequent margins to be adopted (r = 0.626, p = 0.009). Finally, displacements and the subsequent margins to be adopted in Y direction were significantly greater for treatments with more than 2 arcs (MW test p = 0.037 and p = 0.019, respectively). Conclusions In the setting of controlled swallowing during treatment delivery, intra-fraction motion still needs to be taken into account when planning with estimated CTV to PTV margins of 3, 5 and 3 mm in the X, Y and Z directions, respectively. Selected treatments may require additional margins.


2021 ◽  
Vol 73 (1) ◽  
Author(s):  
Maria Jose Segovia ◽  
Daniel Diaz ◽  
Katarzyna Slezak ◽  
Felipe Zuñiga

AbstractTo analyze the process of subduction of the Nazca and South American plates in the area of the Southern Andes, and its relationship with the tectonic and volcanic regime of the place, magnetotelluric measurements were made through a transversal profile of the Chilean continental margin. The data-processing stage included the analysis of dimensional parameters, which as first results showed a three-dimensional environment for periods less than 1 s and two-dimensional for periods greater than 10 s. In addition, through the geomagnetic transfer function (tipper), the presence of structural electrical anisotropy was identified in the data. After the dimensional analysis, a deep electrical resistivity image was obtained by inverting a 2D and a 3D model. Surface conductive anomalies were obtained beneath the central depression related to the early dehydration of the slab and the serpentinization process of the mantle that coincides in location with a discontinuity in the electrical resistivity of a regional body that we identified as the Nazca plate. A shallow conductive body was located around the Calbuco volcano and was correlated with a magmatic chamber or reservoir which in turn appears to be connected to the Liquiñe Ofqui fault system and the Andean Transverse Fault system. In addition to the serpentinization process, when the oceanic crust reaches a depth of 80–100 km, the ascending fluids produced by the dehydration and phase changes of the minerals present in the oceanic plate produce basaltic melts in the wedge of the subcontinental mantle that give rise to an eclogitization process and this explains a large conductivity anomaly present beneath the main mountain range.


2014 ◽  
Vol 794-796 ◽  
pp. 897-902 ◽  
Author(s):  
Yasuhiro Aruga ◽  
Masaya Kozuka ◽  
Yasuo Takaki ◽  
Tatsuo Sato

The relationship between the cluster morphology formed during natural or artificial aging and the paint-bake hardening response in an Al-0.62Mg-0.93Si (mass%) alloy have been investigated using atom probe tomography (APT). Increasing the subsequent aging time at 170 °C causes a gradual increase in hardness in the artificially aged materials, while the retardation period of the hardness increase appears in the naturally aged materials at the early stage of aging. The statistically-proved records in the APT analysis have shown that the artificially aged materials have some large clusters. It is revealed that the hardening at the early stage of the subsequent aging at 170 °C is not promoted in the long-time naturally aged material although the number density of small clusters increases approximately 1.3 times by prolonged natural aging.Hence, we believe that the small clusters are hard to transform continuously into the β'' phase during aging at 170 °C. As for the naturally aged materials, the long-time aging leads to a significant drop in hardness at the early stage of aging at 170 °C. It is speculated that the Mg-Si mixed clusters formed after long-time natural aging can be reversed during the subsequent heat treatment.


Sign in / Sign up

Export Citation Format

Share Document