Determination of relationship between standard penetration test and geotechnical parameters in Ahwaz soil

2019 ◽  
pp. 1-13
Author(s):  
Mohsen Farzi ◽  
Ali Saligheh Zadeh
Keyword(s):  
Standard Penetration Test ◽  
Penetration Test ◽  
Geotechnical Parameters

GEOTECHNICAL PARAMETERS STUDY USING SEISMIC REFRACTION TOMOGRAPHY

2016 ◽  
Vol 78 (8-6) ◽  
Author(s):  
Rose Nadia ◽  
Rosli Saad ◽  
Nordiana Muztaza ◽  
Nur Azwin Ismail ◽  
Mohd Mokhtar Saidin
Keyword(s):  
Parameter Estimation ◽  
Seismic Refraction ◽  
Standard Penetration Test ◽  
P Wave ◽  
Cohesive Soils ◽  
Penetration Test ◽  
Geotechnical Parameters ◽  
Wave Velocities ◽  
Refraction Tomography ◽  
Loose Medium

In this study, correlation is made between seismic P-wave velocities (Vp) with standard penetration test (SPT-N) values to produce soil parameter estimation for engineering site applications. A seismic refraction tomography (SRT) line of 69 m length was spread across two boreholes with 3 m geophones spacing. The acquired data were processed using Firstpix, SeisOpt2D and surfer8 software. The Vp at particular depths were pinpointed and correlated with geotechnical parameters (SPT-N values) from the borehole records. The correlation between Vp and SPT-N values has been established. For cohesive soils, it is grouped into three categories according to consistencies; stiff, very stiff and hard, having velocity rangesof 575-314 m/s, 808-1483 m/s and 1735-2974 m/s, respectively. For non-cohesive soils, it is also divided into three categories based on the denseness as loose, medium dense and dense with Vp ranges of 528-622 m/s, 900-2846 m/s and 2876-2951 m/s, respectively

scholarly journals PROPOSTA DE APLICAÇÃO DE RESULTADOS DE SONDAGENS COM MARTELO LEVE (DPL) NO CAMPO EXPERIMENTAL DA UNIFOR EM PROJETOS DE FUNDAÇÕES PARA PEQUENAS CARGAS [ Proposal for the Application of Dynamic Probing Light (DPL) Results in the Experimental Field of UNIFOR in Foundations Projects for Small Loads ]

2018 ◽  
Vol 14 (2) ◽  
Author(s):  
Marcos Fábio Porto de Aguiar ◽  
Fernando Feitosa Monteiro ◽  
Francisco Heber Lacerda de Oliveira ◽  
Yago Machado Pereira de Matos
Keyword(s):  
Bearing Capacity ◽  
Standard Penetration Test ◽  
Coefficient Of Determination ◽  
Deep Foundations ◽  
Penetration Test ◽  
In Situ Tests ◽  
Foundation Design ◽  
Experimental Field

RESUMO: Em meio aos diversos métodos utilizados no Brasil para determinação da capacidade de carga de fundações, a grande maioria parte do índice de resistência à penetração (NSPT). Para o caso de pequenas edificações, devido a fatores geralmente econômicos, a experiência ou a prática regional costumam prevalecer. Sendo assim, são elaborados, muitas vezes, projetos sem um procedimento de cálculo fundamentado em parâmetros comprovados por ensaios geotécnicos, podendo ocasionar problemas na edificação, como recalques excessivos, ou, até mesmo, comprometer a segurança da estrutura. Dessa forma, técnicas mais simples e de baixo custo, como o DPL (Dynamic Probing Light), podem ser uma opção para situações de pequenas cargas, viabilizando projetos fundamentados em ensaios in situ. Partindo de investigações com o DPL, este trabalho tem o objetivo de dimensionar fundações superficiais e profundas para edificações de pequeno porte através de algumas das principais metodologias disponíveis na literatura e verificar a sua eficiência. Por meio de resultados de campanhas de sondagens SPT (Standard Penetration Test) e DPL no campo experimental da Universidade de Fortaleza (UNIFOR), determinou-se a capacidade de carga de fundações superficiais e profundas fazendo aplicação dos índices NSPT e NSPT equivalente obtido pela correlação com o DPL. Identificou-se que essa correlação apresentou coeficiente de determinação satisfatório entre os parâmetros obtidos nos ensaios SPT e DPL para o terreno em questão, mostrando-se o DPL ser uma alternativa pertinente, em termos técnicos para projetos de fundações de obras de pequeno porte.ABSTRACT: Among the various methods used in Brazil of the determination of the bearing capacity on foundations, most part uses the standard penetration resistance (NSPT). For small constructions, due to economic factors generally, experience or regional practice usually prevails. Thus, projects without a reasoned calculation procedure in parameters supported by geotechnical tests are often designed, and may cause problems in the building, as excessive settlements, or even compromise the safety of the structure. In this way, simple and low cost techniques such as DPL (Dynamic Probing Light) may be an option for small loads situations, enabling projects based on in situ tests. This paper proposes to calculate the dimensions of shallow and deep foundations for small constructions and check its efficiency using DPL tests. Through the results of SPT (Standard Penetration Test) and DPL tests in the experimental field of the University of Fortaleza (UNIFOR), the determination of the bearing capacity in shallow and deep foundations was done using NSPT index and equivalent NSPT index obtained by the correlation with DPL. A correlation with satisfactory coefficient of determination was obtained between SPT and DPL tests parameters for the analyzed field, showing up the DPL as an appropriate alternative in technical terms for foundation design of small constructions.

In Situ Investigation of Liquefiable Gravels

2000 ◽  
Vol 1714 (1) ◽  
pp. 75-82 ◽  
Author(s):  
Joseph P. Koester ◽  
Chris Daniel ◽  
Michael L. Anderson
Keyword(s):  
Standard Penetration Test ◽  
Lateral Spreading ◽  
Test Results ◽  
Penetration Test ◽  
Liquefaction Resistance ◽  
Testing Procedures ◽  
In Situ Investigation ◽  
Penetration Tests

A series of dynamic in situ penetration tests was performed in deep alluvial gravel deposits at Seward, Alaska, that were shaken and apparently liquefied by the March 27, 1964, Alaska earthquake. Both a U.S. standard penetration test split spoon and a larger-diameter drive sampler were used, and dynamic cone penetrometers of two sizes were also driven into the gravels near the mouth of the Resurrection River that had exhibited settlement and lateral spreading as a result of earthquake shaking. Two safety hammers were used [nominally 623 N (140 lb) and 1334 N (300 lb)], and the energy delivered with various hammer and penetrometer combinations was measured throughout all tests. Limited measurements of hammer velocity were also made by a radar system developed for that purpose to allow for kinetic energy determination. Soils recovered in the split spoon samplers were sent to the U.S. Army Engineer Waterways Experiment Station Soils Research Facility in Vicksburg, Mississippi, where they were evaluated for classification (gradation and index properties). The sampling and testing procedures used at the Seward site, as well as preliminary analysis of the various penetration test results, are summarized. Comparisons are made with penetration resistance measurements made by the Alaska Highway Department immediately after the 1964 earthquake. Results of this investigation will be adapted to guide future practice for in situ determination of liquefaction resistance in coarse alluvial soils.

scholarly journals Evaluation of the mechanical properties of fluvial coarsegrained soils from dynamic penetration test

2021 ◽  
Vol 1209 (1) ◽  
pp. 012081
Author(s):  
E Kučová ◽  
M Kuvik
Keyword(s):  
Coarse Grained ◽  
Rock Properties ◽  
Penetration Test ◽  
Large Space ◽  
Geotechnical Parameters ◽  
Geotechnical Structures ◽  
Dynamic Penetration ◽  
Statistical Determination ◽  
Characteristic Values

Abstract Soil and rock properties are essential inputs for the design of geotechnical structures. But unlike man-made materials, the determination of the characteristic value is not simple, mostly because of the large space variability of the soils and rocks. In many cases, the large spatial variability makes it difficult to collect sufficient ground samples for further laboratory testing so that many tests are performed directly in the field. In Slovakia, the dynamic penetration test (DP) is, among others, a quite popular field test for soil investigation. From the measured data, it is possible to derive relative density (ID) shear (φ ef) and deformation (E def) parameters of coarse-grained soils. There are many available correlations between the DP results and geotechnical parameters. Therefore, it is necessary to choose the most appropriate one as it considerably affects the final evaluation. This paper shows the assessment of geotechnical parameters of coarse-grained fluvial soil from the DP results and presents the statistical determination of its characteristic values, which are furthermore compared with the nominal values used in Slovakia.

Evaluation and use of clustering algorithms for standard penetration test data classification

2014 ◽  
Vol 29 (1) ◽  
pp. 55-64 ◽  
Author(s):  
A. Burak Göktepe ◽  
Selim Altun ◽  
Alper Sezer
Keyword(s):  
Clustering Algorithms ◽  
Standard Penetration Test ◽  
Test Results ◽  
Penetration Test ◽  
N Value ◽  
Fine Grained ◽  
Liquidity Index ◽  
Spt N Value

AbstractThe standard penetration test (SPT) is the most common test conducted in the field, and it is used to determine in situ properties of different soils. Although it is a matter of debate, these tests are also used for the determination of the consistency of fine-grained soils, whereby the test results can also be utilized to establish numerous empirical correlations to predict the strength of soils in the field. In this study, unsupervised clustering algorithms were employed to classify the SPT standard penetration resistance value (SPT-N) in the field. In this scope, shear strength and liquidity index parameters were used to classify the SPT-N values by taking the classification system of Terzaghi and Peck (1967) into consideration. The results showed that the input parameters were successful for classifying the SPT-N value to an acceptable degree of strength attribute. Therefore, in cases where the SPT tests are unreliable or could not be performed, laboratory tests on undisturbed specimens can give valuable information regarding the consistency and SPT-N value of the soil specimen under investigation. Data in this study is based on several tests that were conducted in a region; nevertheless, it is advised that the results of this study should be evaluated using global data.

Sign in / Sign up

Export Citation Format

Share Document