scholarly journals Human endothelial actin-binding protein (ABP-280, nonmuscle filamin): a molecular leaf spring.

1990 ◽  
Vol 111 (3) ◽  
pp. 1089-1105 ◽  
Author(s):  
J B Gorlin ◽  
R Yamin ◽  
S Egan ◽  
M Stewart ◽  
T P Stossel ◽  
...  
Keyword(s):  
Actin Filaments ◽  
Hydrophobic Interactions ◽  
Binding Protein ◽  
Actin Binding ◽  
Platelet Glycoprotein ◽  
Leaf Spring ◽  
Cross Linking ◽  
Membrane Glycoproteins ◽  
Actin Binding Protein ◽  
Physical Measurements

Actin-binding protein (ABP-280, nonmuscle filamin) is a ubiquitous dimeric actin cross-linking phosphoprotein of peripheral cytoplasm, where it promotes orthogonal branching of actin filaments and links actin filaments to membrane glycoproteins. The complete nucleotide sequence of human endothelial cell ABP cDNA predicts a polypeptide subunit chain of 2,647 amino acids, corresponding to 280 kD, also the mass derived from physical measurements of the native protein. The actin-binding domain is near the amino-terminus of the subunit where the amino acid sequence is similar to other actin filament binding proteins, including alpha-actinin, beta-spectrin, dystrophin, and Dictyostelium abp-120. The remaining 90% of the sequence comprises 24 repeats, each approximately 96 residues long, predicted to have stretches of beta-sheet secondary structure interspersed with turns. The first 15 repeats may have substantial intrachain hydrophobic interactions and overlap in a staggered fashion to yield a backbone with mechanical resilience. Sequence insertions immediately before repeats 16 and 24 predict two hinges in the molecule near points where rotary-shadowed molecules appear to swivel in electron micrographs. Both putative hinge regions are susceptible to cleavage by proteases and the second also contains the site that binds the platelet glycoprotein Ib/IX complex. Phosphorylation consensus sequences are also located in the hinges or near them. Degeneracy within every even-numbered repeat between 16 and 24 and the insertion before repeat 24 may convert interactions within chains to interactions between chains to account for dimer formation within a domain of 7 kD at the carboxy-terminus. The structure of ABP dimers resembles a leaf spring. Interchain interactions hold the leaves firmly together at one end, whereas intrachain hydrophobic bonds reinforce the arms of the spring where the leaves diverge, making it sufficiently stiff to promote high-angle branching of actin filaments. The large size of the leaves, their interruption by two hinges and flexible actin-binding site, facilitate cross-linking of widely dispersed actin filaments.

Binding of Human Platelet Glycoprotein lb and Actin to Fragments of Actin-Binding Protein

1992 ◽  
Vol 67 (02) ◽  
pp. 252-257 ◽  
Author(s):  
Anne M Aakhus ◽  
J Michael Wilkinson ◽  
Nils Olav Solum
Keyword(s):  
Actin Filaments ◽  
High Speed ◽  
Binding Protein ◽  
Protein A ◽  
Actin Binding ◽  
Platelet Glycoprotein ◽  
Actin Binding Protein ◽  
Crossed Immunoelectrophoresis ◽  
Triton X ◽  
Calpain Inhibitors

SummaryActin-binding protein (ABP) is degraded into fragments of 190 and 90 kDa by calpain. A monoclonal antibody (MAb TI10) against the 90 kDa fragment of ABP coprecipitated with the glycoprotein lb (GP lb) peak observed on crossed immunoelectrophoresis of Triton X-100 extracts of platelets prepared without calpain inhibitors. MAb PM6/317 against the 190 kDa fragment was not coprecipitated with the GP lb peak under such conditions. The 90 kDa fragment was adsorbed on protein A agarose from extracts that had been preincubated with antibodies to GP lb. This supports the idea that the GP Ib-ABP interaction resides in the 90 kDa region of ABP. GP lb was sedimented with the Triton-insoluble actin filaments in trace amounts only, and only after high speed centrifugation (100,000 × g, 3 h). Both the 190 kDa and the 90 kDa fragments of ABP were sedimented with the Triton-insoluble actin filaments.

scholarly journals Effect of actin-binding protein on the sedimentation properties of actin.

1982 ◽  
Vol 94 (1) ◽  
pp. 51-55 ◽  
Author(s):  
S Rosenberg ◽  
A Stracher
Keyword(s):  
Actin Filaments ◽  
Human Platelet ◽  
Binding Protein ◽  
Actin Binding ◽  
Cross Linking ◽  
Actin Binding Protein ◽  
Cell Biol

Actin and actin-binding protein (ABP) have recently been purified from human platelet cytoskeletons (S. Rosenberg, A. Stracher, and R.C. Lucas, 1981, J. Cell Biol. 91:201-211). Here, the effect of ABP on the sedimentation of actin was studied. When ABP was added to preformed F-actin filaments, it bound until a maximum ratio of 1:9 (ABP:actin, mol:mol) was reached. however, when actin was polymerized in the presence of ABP, two and a half times more ABP was able to bind to the actin- that is, every 3.4 actin monomers were now bound by an ABP dimer. ABP was not able to induce the sedimentation of actin under nonpolymerizing conditions but was able to reduce the time and concentration of actin required for sedimentation under slow polymerizing conditions. ABP, therefore, exerts its effect of G-actin by either nucleating polymerization or by cross-linking newly formed oligomers into a more sedimentable form.

scholarly journals Identification of membrane proteins mediating the interaction of human platelets

1980 ◽  
Vol 86 (1) ◽  
pp. 77-86 ◽  
Author(s):  
D Phillips ◽  
L Jennings ◽  
H Edwards
Keyword(s):  
Actin Filaments ◽  
Binding Protein ◽  
Membrane Surface ◽  
Direct Interaction ◽  
Cytoskeletal Proteins ◽  
Actin Binding ◽  
Insoluble Residue ◽  
Membrane Glycoproteins ◽  
Actin Binding Protein ◽  
Activated Platelets

Membrane glycoproteins that mediate platelet-platelet interactions were investigated by identifying those associated with the cytoskeletal structures from aggregated platelets. The cytoskeletal structures from washed platelets, thrombin-activated platelets (platelets incubated with thrombin in the presence of mM EDTA to prevent aggregation) and thrombin- aggregated platelets (platelets activated in the presence of mM Ca(++) were prepared by first treating platelet suspensions with 1 percent Triton X-100 and 5 mM EGTA and then isolating the insoluble residue by centrifugation. The readily identifiable structures in electron micrographs of the residue from washed platelets had the shape and dimensions of actin filaments. Analysis of this residue from washed platelets had the shape and dimensions of actin filaments. Analysis of this residue by SDS gel electrophoresis showed that it consisted primarily of three proteins: actin (mol wt = 43,000), myosin (mol wt = 200,000) and a high molecular weight polypeptide (mol wt = 255,000) which had properties indentical to actin-binding protein (filamin). When platelets are activated with thrombin in the presence of EDTA to prevent aggregation, there was a marked increase in the amount of insoluble precipitate in the subsequent Triton extraction. Transmission electron microscopy showed that this residue not only contained the random array of actin filaments as seen above, but also organized structures from individual platelets which appeared as balls of electron-dense filamentous material approximately 1mum in diameter. SDS polyacrylamide gel analysis of the Triton residue of activated platelets showed that this preparation contained more actin, myosin and actin-binding protein than that from washed platelets plus polypeptides with mol wt of 56,000 and 90,000 and other minor polypeptides. Thus, thrombin activation appeared to increase polymerization of actin in association with other cytoskeletal proteins into structures that are observable after Triton extraction. The cytoskeletal structures from thrombin-aggregated platelets were similar to those from thrombin-activated platelets, except that the structural elements from individual platelets remained aggregated rather than randomly dispersed in the actin filaments. This suggested that the membrane components that mediate the direct interaction of platelets were in Triton residue from aggregated platelets. Only a small percentage of the membrane surface proteins and glycoproteins were found in the cytoskeletal structures from either washed platelets or thrombin-activated platelets. In contrast, the aggregated cytoskeletal structures from thrombin-aggregated platelets contained membrane glycoproteins IIb (26 percent of the total in pre-extracted platelets) and III (14 percent), suggesting that one or both of these glycoproteins participate in the direct interaction of platelets during aggregation.

scholarly journals ArabidopsisCROLIN1, a Novel Plant Actin-binding Protein, Functions in Cross-linking and Stabilizing Actin Filaments

2013 ◽  
Vol 288 (45) ◽  
pp. 32277-32288 ◽  
Author(s):  
Honglei Jia ◽  
Jisheng Li ◽  
Jingen Zhu ◽  
Tingting Fan ◽  
Dong Qian ◽  
...  
Keyword(s):  
Actin Filaments ◽  
Binding Protein ◽  
Actin Binding ◽  
Cross Linking ◽  
Actin Binding Protein ◽  
Protein Functions

scholarly journals A calcium- and pH-regulated protein from Dictyostelium discoideum that cross-links actin filaments.

1982 ◽  
Vol 94 (2) ◽  
pp. 466-471 ◽  
Author(s):  
J Condeelis ◽  
M Vahey
Keyword(s):  
Electron Microscopy ◽  
Dictyostelium Discoideum ◽  
Actin Filaments ◽  
Binding Protein ◽  
Actin Binding ◽  
Cross Linking ◽  
Optimal Conditions ◽  
Maximal Inhibition ◽  
Actin Binding Protein ◽  
Cross Links

We have purified an actin binding protein from amebas of Dictyostelium discoideum which we call 95,000-dalton protein (95K). This protein is rod shaped, approximately 40 nm long in the electron microscope, contains two subunits measuring 95,000 daltons each, and cross-links actin filaments. Cross-linking activity was demonstrated by using falling-ball viscometry, Ostwald viscometry, and electron microscopy. Cross-linking activity is optimal at 0.1 microM Ca++ and pH 6.8, but is progressively inhibited at higher Ca++ and pH levels over a physiological range. Half-maximal inhibition occurs at 1.6 microM free Ca++ and pH 7.3, respectively. Sedimentation experiments demonstrate that elevated Ca++ and pH inhibit the binding of 95K to F-actin which explains the loss of cross-linking activity. Electron microscopy demonstrates that under optimal conditions for cross-linking, 95K protein bundles actin filaments and that this bundling is inhibited by microM Ca++. Severing of actin filaments by 95K was not observed in any of the various assays under any of the solution conditions used. Hence, 95K protein is a rod-shaped, dimeric, Ca++- and pH-regulated actin binding protein that cross-links but does not sever actin filaments.

scholarly journals Actin-binding protein promotes the bipolar and perpendicular branching of actin filaments.

1980 ◽  
Vol 87 (3) ◽  
pp. 841-848 ◽  
Author(s):  
J H Hartwig ◽  
J Tyler ◽  
T P Stossel
Keyword(s):  
Actin Filaments ◽  
Actin Polymerization ◽  
Average Length ◽  
Binding Protein ◽  
Actin Binding ◽  
Branch Points ◽  
Heavy Meromyosin ◽  
Actin Binding Protein ◽  
Protein Dimers ◽  
Protein Molecules

Branching filaments with striking perpendicularity form when actin polymerizes in the presence of macrophage actin-binding protein. Actin-binding protein molecules are visible at the branch points. Compared with actin polymerized in the absence of actin-binding proteins, not only do the filaments branch but the average length of the actin filaments decreases from 3.2 to 0.63 micrometer. Arrowhead complexes formed by addition of heavy meromyosin molecules to the branching actin filaments point toward the branch points. Actin-binding protein also accelerates the onset of actin polymerization. All of these findings show that actin filaments assemble from nucleating sites on actin-binding protein dimers. A branching polymerization of actin filaments from a preexisting lattice of actin filaments joined by actin-binding protein molecules could generate expansion of cortical cytoplasm in amoeboid cells.

scholarly journals Three-dimensional structure of actin filaments and of an actin gel made with actin-binding protein.

1983 ◽  
Vol 96 (5) ◽  
pp. 1400-1413 ◽  
Author(s):  
R Niederman ◽  
P C Amrein ◽  
J Hartwig
Keyword(s):  
Actin Filaments ◽  
Binding Protein ◽  
Three Dimensional ◽  
Actin Binding ◽  
Dimensional Structure ◽  
Molar Ratio ◽  
Computer Assisted ◽  
Three Dimensional Structure ◽  
Actin Binding Protein ◽  
Critical Point Drying

Purified muscle actin and mixtures of actin and actin-binding protein were examined in the transmission electron microscope after fixation, critical point drying, and rotary shadowing. The three-dimensional structure of the protein assemblies was analyzed by a computer-assisted graphic analysis applicable to generalized filament networks. This analysis yielded information concerning the frequency of filament intersections, the filament length between these intersections, the angle at which filaments branch at these intersections, and the concentration of filaments within a defined volume. Purified actin at a concentration of 1 mg/ml assembled into a uniform mass of long filaments which overlap at random angles between 0 degrees and 90 degrees. Actin in the presence of macrophage actin-binding protein assembled into short, straight filaments, organized in a perpendicular branching network. The distance between branch points was inversely related to the molar ratio of actin-binding protein to actin. This distance was what would be predicted if actin filaments grew at right angles off of nucleation sites on the two ends of actin-binding protein dimers, and then annealed. The results suggest that actin in combination with actin-binding protein self-assembles to form a three-dimensional network resembling the peripheral cytoskeleton of motile cells.

scholarly journals The Plant-Specific Actin Binding Protein SCAB1 Stabilizes Actin Filaments and Regulates Stomatal Movement in Arabidopsis

2011 ◽  
Vol 23 (6) ◽  
pp. 2314-2330 ◽  
Author(s):  
Yang Zhao ◽  
Shuangshuang Zhao ◽  
Tonglin Mao ◽  
Xiaolu Qu ◽  
Wanhong Cao ◽  
...  
Keyword(s):  
Actin Filaments ◽  
Binding Protein ◽  
Actin Binding ◽  
Stomatal Movement ◽  
Actin Binding Protein

scholarly journals Isolation and characterization of actin and actin-binding protein from human platelets.

1981 ◽  
Vol 91 (1) ◽  
pp. 201-211 ◽  
Author(s):  
S Rosenberg ◽  
A Stracher ◽  
R C Lucas
Keyword(s):  
Actin Filaments ◽  
Binding Protein ◽  
Blood Platelets ◽  
Actin Binding ◽  
Insoluble Residue ◽  
Free Calcium ◽  
Filamentous Form ◽  
Actin Binding Protein ◽  
Isolation And Characterization ◽  
The Reformation

Human blood platelets, which are highly motile cells essential for the maintenance of hemostasis, contain large quantities of actin and other contractile proteins. We have previously introduced a method (Lucas, R. C., T. C. Detwiler, and A. Stracher, J. Cell Biol., 1976, 70(2, Pt. 2):259 a) for the quantitative recovery of the platelets' cytoskeleton using a solution containing 1% Triton X-100 and 10 mM EGTA. This cytoskeleton contains most of the platelets' actin, actin-binding protein (ABP, subunit molecular weight = 260,000), and a 105,000-dalton protein. Negative staining of this Triton-insoluble residue on an EM grid shows it to consist of branched cables of actin filaments aligned in parallel. When this cytoskeletal structure is dissolved in high-salt solutions, the actin and ABP dissociate and can subsequently be separated. Here we will present simple and rapid methods for the individual purifications of platelet actin and platelet ABP. When purified actin and ABP are recombined in vitro, they are shown to be both necessary and sufficient for the reformation of the cytoskeletal complex. The reformed structure is visualized as a complex array of fibers, which at the EM level are seen to be bundles of actin filaments. The reformation of the cytoskeleton requires only that the actin be in the filamentous form--no accessory proteins, chelating agents, divalent cations, or energy sources are necessary. In vivo, however, the state of assembly of the platelets' cytoskeleton appears to be under the control of the intracellular concentration of free calcium. Under conditions where proteolysis is inhibited and EGTA is omitted from the Triton-solubilization step, no cytoskeleton can be isolated. The ability of Ca+2 to control the assembly and disassembly of the platelets' cytoskeleton provides a mechanism for cytoskeletal involvement in shape change and pseudopod formation during platelet activation.

Sign in / Sign up

Export Citation Format

Share Document