scholarly journals The Saccharomyces cerevisiae Kinesin-related Motor Kar3p Acts at Preanaphase Spindle Poles to Limit the Number and Length of Cytoplasmic Microtubules

1997 ◽  
Vol 137 (2) ◽  
pp. 417-431 ◽  
Author(s):  
William Saunders ◽  
David Hornack ◽  
Valerie Lengyel ◽  
Changchun Deng
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Body Region ◽  
Microtubule Depolymerization ◽  
Growth Defects ◽  
Microtubule Polymerization ◽  
Late Anaphase ◽  
A Cell ◽  
Cytoplasmic Microtubules

The Saccharomyces cerevisiae kinesin-related motor Kar3p, though known to be required for karyogamy, plays a poorly defined, nonessential role during vegetative growth. We have found evidence suggesting that Kar3p functions to limit the number and length of cytoplasmic microtubules in a cell cycle–specific manner. Deletion of KAR3 leads to a dramatic increase in cytoplasmic microtubules, a phenotype which is most pronounced from START through the onset of anaphase but less so during late anaphase in synchronized cultures. We have immunolocalized HA-tagged Kar3p to the spindle pole body region, and fittingly, Kar3p was not detected by late anaphase. A microtubule depolymerizing activity may be the major vegetative role for Kar3p. Addition of the microtubule polymerization inhibitors nocodazol or benomyl to the medium or deletion of the nonessential α-tubulin TUB3 gene can mostly correct the abnormal microtubule arrays and other growth defects of kar3 mutants, suggesting that these phenotypes result from excessive microtubule polymerization. Microtubule depolymerization may also be the mechanism by which Kar3p acts in opposition to the anaphase B motors Cin8p and Kip1p. A preanaphase spindle collapse phenotype of cin8 kip1 mutants, previously shown to involve Kar3p, is markedly delayed when microtubule depolymerization is inhibited by the tub2-150 mutation. These results suggest that the Kar3p motor may act to regulate the length and number of microtubules in the preanaphase spindle.

The influence of the microtubule inhibitor, methyl benzimidazol-2-yl-carbamate (MBC) on nuclear division and the cell cycle in Saccharomyces cerevisiae

1980 ◽  
Vol 46 (1) ◽  
pp. 341-352
Author(s):  
R.A. Quinlan ◽  
C.I. Pogson ◽  
K. Gull
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Ultrastructural Examination ◽  
Microtubule Inhibitor ◽  
Microtubule Polymerization ◽  
Pole Body ◽  
Outer Component ◽  
Spindle Microtubules

Methyl benzimidazol-2-yl-carbamate (MBC), at a concentration of 100 microM, has a pronounced effect on the growth of Saccharomyces cerevisiae, resulting in the accumulation of cells as large doublets. We have determined a specific execution point for the effect of MBC on the yeast cell cycle, and have shown that this execution point is between the cycle events of spindle pole body duplication and spindle pole body separation. An ultrastructural examination of the MBC-treated cells revealed the absence of cytoplasmic and spindle microtubules. MBC treatment also produced an altered spindle pole body morphology, causing the disappearance of the outer component. Nuclear size was also markedly increased in the MBC-induced doublet cells, although the septa were completely absent from these doublet cells. It is proposed that MBC inhibits microtubule polymerization, rather than causing the depolymerization of stable microtubules.

scholarly journals The yeast centrosome translates the positional information of the anaphase spindle into a cell cycle signal

2007 ◽  
Vol 179 (3) ◽  
pp. 423-436 ◽  
Author(s):  
Hiromi Maekawa ◽  
Claire Priest ◽  
Johannes Lechner ◽  
Gislene Pereira ◽  
Elmar Schiebel
Keyword(s):  
Spindle Pole Body ◽  
Coiled Coil ◽  
Positional Information ◽  
Spindle Pole ◽  
Mitotic Exit ◽  
Spindle Orientation ◽  
Additional Function ◽  
A Cell ◽  
Cytoplasmic Microtubules ◽  
Guanosine Triphosphatase

The spindle orientation checkpoint (SPOC) of budding yeast delays mitotic exit when cytoplasmic microtubules (MTs) are defective, causing the spindle to become misaligned. Delay is achieved by maintaining the activity of the Bfa1–Bub2 guanosine triphosphatase–activating protein complex, an inhibitor of mitotic exit. In this study, we show that the spindle pole body (SPB) component Spc72, a transforming acidic coiled coil–like molecule that interacts with the γ-tubulin complex, recruits Kin4 kinase to both SPBs when cytoplasmic MTs are defective. This allows Kin4 to phosphorylate the SPB-associated Bfa1, rendering it resistant to inactivation by Cdc5 polo kinase. Consistently, forced targeting of Kin4 to both SPBs delays mitotic exit even when the anaphase spindle is correctly aligned. Moreover, we present evidence that Spc72 has an additional function in SPOC regulation that is independent of the recruitment of Kin4. Thus, Spc72 provides a missing link between cytoplasmic MT function and components of the SPOC.

Ady3p Links Spindle Pole Body Function to Spore Wall Synthesis in Saccharomyces cerevisiae

Genetics ◽  
2002 ◽  
Vol 160 (4) ◽  
pp. 1439-1450
Author(s):  
Mark E Nickas ◽  
Aaron M Neiman
Keyword(s):  
Saccharomyces Cerevisiae ◽  
De Novo ◽  
Spindle Pole Body ◽  
Leading Edge ◽  
Spindle Pole ◽  
Spore Wall ◽  
Pole Body ◽  
Prospore Membrane ◽  
Sporulation Efficiency ◽  
Spore Walls

Abstract Spore formation in Saccharomyces cerevisiae requires the de novo synthesis of prospore membranes and spore walls. Ady3p has been identified as an interaction partner for Mpc70p/Spo21p, a meiosis-specific component of the outer plaque of the spindle pole body (SPB) that is required for prospore membrane formation, and for Don1p, which forms a ring-like structure at the leading edge of the prospore membrane during meiosis II. ADY3 expression has been shown to be induced in midsporulation. We report here that Ady3p interacts with additional components of the outer and central plaques of the SPB in the two-hybrid assay. Cells that lack ADY3 display a decrease in sporulation efficiency, and most ady3Δ/ady3Δ asci that do form contain fewer than four spores. The sporulation defect in ady3Δ/ady3Δ cells is due to a failure to synthesize spore wall polymers. Ady3p forms ring-like structures around meiosis II spindles that colocalize with those formed by Don1p, and Don1p rings are absent during meiosis II in ady3Δ/ady3Δ cells. In mpc70Δ/mpc70Δ cells, Ady3p remains associated with SPBs during meiosis II. Our results suggest that Ady3p mediates assembly of the Don1p-containing structure at the leading edge of the prospore membrane via interaction with components of the SPB and that this structure is involved in spore wall formation.

scholarly journals The Mammalian γ-Tubulin Complex Contains Homologues of the Yeast Spindle Pole Body Components Spc97p and Spc98p

1998 ◽  
Vol 141 (3) ◽  
pp. 663-674 ◽  
Author(s):  
Steven M. Murphy ◽  
Lenore Urbani ◽  
Tim Stearns
Keyword(s):  
Mammalian Cells ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Microtubule Organizing Centers ◽  
Molecular Weights ◽  
Microtubule Polymerization ◽  
Pole Body ◽  
Human Proteins ◽  
Body Components ◽  
Cytoplasmic Complex

γ-Tubulin is a universal component of microtubule organizing centers where it is believed to play an important role in the nucleation of microtubule polymerization. γ-Tubulin also exists as part of a cytoplasmic complex whose size and complexity varies in different organisms. To investigate the composition of the cytoplasmic γ-tubulin complex in mammalian cells, cell lines stably expressing epitope-tagged versions of human γ-tubulin were made. The epitope-tagged γ-tubulins expressed in these cells localize to the centrosome and are incorporated into the cytoplasmic γ-tubulin complex. Immunoprecipitation of this complex identifies at least seven proteins, with calculated molecular weights of 48, 71, 76, 100, 101, 128, and 211 kD. We have identified the 100- and 101-kD components of the γ-tubulin complex as homologues of the yeast spindle pole body proteins Spc97p and Spc98p, and named the corresponding human proteins hGCP2 and hGCP3. Sequence analysis revealed that these proteins are not only related to their respective homologues, but are also related to each other. GCP2 and GCP3 colocalize with γ-tubulin at the centrosome, cosediment with γ-tubulin in sucrose gradients, and coimmunoprecipitate with γ-tubulin, indicating that they are part of the γ-tubulin complex. The conservation of a complex involving γ-tubulin, GCP2, and GCP3 from yeast to mammals suggests that structurally diverse microtubule organizing centers such as the yeast spindle pole body and the animal centrosome share a common molecular mechanism for microtubule nucleation.

DIPLOID SPORE FORMATION AND OTHER MEIOTIC EFFECTS OF TWO CELL-DIVISION-CYCLE MUTATIONS OF SACCHAROMYCES CEREVISIAE

Genetics ◽  
1980 ◽  
Vol 96 (4) ◽  
pp. 859-876 ◽  
Author(s):  
David Schild ◽  
Breck Byers
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Division ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Cell Division Cycle ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Single Spore ◽  
Diploid Cells ◽  
Meiosis I

ABSTRACT The meiotic effects of two cell-division-cycle mutations of Saccharomyces cerevisiae (cdc5 and cdc14) have been examined. These mutations were isolated by L. H. Hartwell and his colleagues and characterized as defective in mitosis, causing a temperature-sensitive arrest in late nuclear division. When subjected to the restrictive temperature in meiosis, diploid cells homozygous for either of these mutations generally proceeded through premeiotic DNA synthesis and commitment to meiotic levels of recombination, but then arrested at a stage following spindle pole body (SPB) duplication and separation. The two SPBs lacked the interconnection by spindle microtubules typical of the complete meiosis I spindle. Challenge of these homozygotes by a semi-restrictive temperature often caused the production of asci containing two diploid spores. Genetic analysis of the viable pairs of spores revealed that each spore had become homozygous for centromere-linked markers significantly more frequently than for distal markers, indicating that the two spores each contained pairs of sister centromeres that had co-segregated in the reductional division of meiosis I. Ultrastructural analysis of the cdc5 homozygote demonstrated that these cells had completed meiosis I and formed two meiosis II spindles, but that the latter remained unusually short. This resulted in the encapsulation of both poles of each spindle within a single spore wall. These mutations therefore are defective in both meiotic divisions, as well as in the mitotic division described originally.

scholarly journals Toxic effects of excess cloned centromeres.

1986 ◽  
Vol 6 (6) ◽  
pp. 2213-2222 ◽  
Author(s):  
B Futcher ◽  
J Carbon
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Copy Number ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Host Cells ◽  
Selectable Markers ◽  
Pole Body ◽  
Copy Numbers ◽  
Yeast Plasmids

Plasmids carrying a Saccharomyces cerevisiae centromere have a copy number of one or two, whereas other yeast plasmids have high copy numbers. The number of CEN plasmids per yeast cell was made artificially high by transforming cells simultaneously with several different CEN plasmids carrying different, independently selectable markers. Some host cells carried five different CEN plasmids and an average total of 13 extra copies of CEN3. Several effects were noted. The copy number of each plasmid was unexpectedly high. The plasmids were mutually unstable. Cultures contained many dead cells. The viable host cells grew more slowly than control cells, even in nonselective medium. There was a pause in the cell cycle at or just before mitosis. We conclude that an excess of centromeres is toxic and that the copy number of centromere plasmids is low partly because of selection against cells carrying multiple centromere plasmids. The toxicity may be caused by competition between the centromeres for some factor present in limiting quantities, e.g., centromere-binding proteins, microtubules, or space on the spindle pole body.

scholarly journals Bim1p/Yeb1p Mediates the Kar9p-dependent Cortical Attachment of Cytoplasmic Microtubules

2000 ◽  
Vol 11 (9) ◽  
pp. 2949-2959 ◽  
Author(s):  
Rita K. Miller ◽  
Soo-Chen Cheng ◽  
Mark D. Rose
Keyword(s):  
Fluorescent Protein ◽  
Binding Protein ◽  
Spindle Pole Body ◽  
Attachment Site ◽  
Spindle Pole ◽  
Cell Cortex ◽  
Microtubule Binding ◽  
Pole Body ◽  
Cytoplasmic Microtubules ◽  
Two Hybrid

In Saccharomyces cerevisiae, positioning of the mitotic spindle depends on the interaction of cytoplasmic microtubules with the cell cortex. In this process, cortical Kar9p in the bud acts as a link between the actin and microtubule cytoskeletons. To identify Kar9p-interacting proteins, a two-hybrid screen was conducted with the use of full-length Kar9p as bait, and three genes were identified: BIM1, STU2, andKAR9 itself. STU2 encodes a component of the spindle pole body. Bim1p is the yeast homologue of the human microtubule-binding protein EB1, which is a binding partner to the adenomatous polyposis coli protein involved in colon cancer. Eighty-nine amino acids within the third quarter of Bim1p was sufficient to confer interaction with Kar9p. The two-hybrid interactions were confirmed with the use of coimmunoprecipitation experiments. Genetic analysis placed Bim1p in the Kar9p pathway for nuclear migration. Bim1p was not required for Kar9p's cortical or spindle pole body localization. However, deletion ofBIM1 eliminated Kar9p localization along cytoplasmic microtubules. Furthermore, in the bim1 mutants, the cytoplasmic microtubules no longer intersected the cortical dot of Green Fluorescent Protein–Kar9p. These experiments demonstrate that the interaction of cytoplasmic microtubules with the Kar9p cortical attachment site requires the microtubule-binding protein Bim1p.

scholarly journals The Differential Roles of Budding Yeast Tem1p, Cdc15p, and Bub2p Protein Dynamics in Mitotic Exit

2004 ◽  
Vol 15 (4) ◽  
pp. 1519-1532 ◽  
Author(s):  
Jeffrey N. Molk ◽  
Scott C. Schuyler ◽  
Jenny Y. Liu ◽  
James G. Evans ◽  
E. D. Salmon ◽  
...  
Keyword(s):  
Budding Yeast ◽  
Protein Localization ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Mitotic Exit ◽  
Yeast Saccharomyces Cerevisiae ◽  
Late Anaphase ◽  
Gfp Fluorescence ◽  
Mitotic Exit Network

In the budding yeast Saccharomyces cerevisiae the mitotic spindle must be positioned along the mother-bud axis to activate the mitotic exit network (MEN) in anaphase. To examine MEN proteins during mitotic exit, we imaged the MEN activators Tem1p and Cdc15p and the MEN regulator Bub2p in vivo. Quantitative live cell fluorescence microscopy demonstrated the spindle pole body that segregated into the daughter cell (dSPB) signaled mitotic exit upon penetration into the bud. Activation of mitotic exit was associated with an increased abundance of Tem1p-GFP and the localization of Cdc15p-GFP on the dSPB. In contrast, Bub2p-GFP fluorescence intensity decreased in mid-to-late anaphase on the dSPB. Therefore, MEN protein localization fluctuates to switch from Bub2p inhibition of mitotic exit to Cdc15p activation of mitotic exit. The mechanism that elevates Tem1p-GFP abundance in anaphase is specific to dSPB penetration into the bud and Dhc1p and Lte1p promote Tem1p-GFP localization. Finally, fluorescence recovery after photobleaching (FRAP) measurements revealed Tem1p-GFP is dynamic at the dSPB in late anaphase. These data suggest spindle pole penetration into the bud activates mitotic exit, resulting in Tem1p and Cdc15p persistence at the dSPB to initiate the MEN signal cascade.

Ultrastructure of mitosis and the spindle pole body cycle in the smut fungus, Tilletia foetida

1985 ◽  
Vol 63 (1) ◽  
pp. 86-96 ◽  
Author(s):  
James A. Hoffmann ◽  
Blair J. Goates
Keyword(s):  
Nuclear Membrane ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Dense Layer ◽  
Double Structure ◽  
Pole Body ◽  
Cytoplasmic Microtubules ◽  
Spindle Microtubules ◽  
Dense Chromatin ◽  
Tilletia Foetida

The interphase nucleus in secondary sporidia of Tilletia foetida consists of mostly diffuse chromatin, one or two nucleoli, and an area of heterochromatin located opposite an electron-dense, extranuclear spindle pole body (SPB). The interphase SPB is an oval- to bar-shaped, double-structured disc that has a crystallinelike substructure. During nuclear migration into nascent sporidia, SPBs and nucleoli are randomly oriented. At the onset of division, chromatin begins to condense and the SPB becomes located on a nuclear protuberance. Cytoplasmic microtubules terminate at the SPBs and multivesicular bodies surround the SPBs from the early stages of SPB division to early postdivision. SPB discs become spheroid and each develops a medial, dense layer. Then, a basal, dense layer develops and elongates as the SPBs separate and become positioned on opposite sides of the nuclear protuberance. The nuclear membrane opens opposite the SPB during SPB division. The nucleolus is extruded into a nuclear bleb and degenerates. SPBs migrate to opposing sides of the nucleus and become diffuse as a microtubular spindle develops between them. Some spindle microtubules terminate at dense chromatin patches that are contiguous with the major mass of chromatin surrounding the spindle. During late division stages, spindle microtubules often appear to be closely juxtaposed. Except for polar openings adjacent to the SPBs, the nuclear membrane is entire until late division when it degenerates in the midregion of the nucleus. During early postdivision, the SPB condenses into a small, dense sphere as the chromatin and heterochromatin opposite the SPB become diffuse. The SPB then elongates into a dense bar and SPB material increases, except at the midportion, reforming the double structure of interphase.

Sign in / Sign up

Export Citation Format

Share Document