Critical current density versus normal-state resistivity in granular high-temperature superconductors with different average grain size

2000 ◽  
Vol 13 (7) ◽  
pp. 1005-1010 ◽  
Author(s):  
S R Currás ◽  
J A Veira ◽  
J Maza ◽  
Félix Vidal
MRS Bulletin ◽  
1988 ◽  
Vol 13 (10) ◽  
pp. 56-61 ◽  
Author(s):  
H.J. Scheel ◽  
F. Licci

The discovery of high temperature superconductivity (HTSC) in oxide compounds has confronted materials scientists with many challenging problems. These include the preparation of ceramic samples with critical current density of about 106 A/cm2 at 77 K and sufficient mechanical strength for large-scale electrotechnical and magnetic applications and the preparation of epitaxial thin films of high structural perfection for electronic devices.The main interest in the growth of single crystals is for the study of physical phenomena, which will help achieve a theoretical understanding of HTSC. Theorists still do not agree on the fundamental mechanisms of HTSC, and there is a need for good data on relatively defect-free materials in order to test the many models. In addition, the study of the role of defects like twins, grain boundaries, and dislocations in single crystals is important for understanding such parameters as the critical current density. The study of HTSC with single crystals is also expected to be helpful for finding optimum materials for the various applications and hopefully achieving higher values of the superconducting transition temperature Tc than the current maximum of about 125 K. It seems unlikely at present that single crystals will be used in commercial devices, but this possibility cannot be ruled out as crystal size and quality improve.


1990 ◽  
Vol 5 (3) ◽  
pp. 478-483
Author(s):  
Marcin Wardak ◽  
Mireille Treuil Clapp

The critical current density Jc of superconductors is strongly dependent on microstructure. The microstructure and crystallization of amorphous Nb75Ge24.5B0.5 melt spun ribbons were studied as a function of 24-h anneals between 680 and 860 °C. Metastable A15 was formed with a composition close to that of the starting amorphous material. As the temperature increased from 680 to 720°C, crystallization remained nonuniform and the average grain size decreased from 130 nm to 60 nm. Between 740 and 800°C crystallization was uniform and the average grain size was constant at 30 nm. Above 820°C grain growth occurred. In order to have high Jc's a uniformly crystallized small-grained material is desirable.


Sign in / Sign up

Export Citation Format

Share Document