Linear-to-circular polarization conversion based on all-dielectric 3D-printed metasurface for the application of broadband circularly polarized reflectarray antenna

2020 ◽  
Vol 53 (26) ◽  
pp. 265106
Author(s):  
Jia-Wen Hao ◽  
Feng Wei ◽  
Xi-Bei Zhao ◽  
Xiao Wei Shi
Keyword(s):  
Circular Polarization ◽  
Polarization Conversion ◽  
Circularly Polarized ◽  
3D Printed ◽  
Reflectarray Antenna

A Novel Right Handed Circular Polarization Folded Reflectarray Antenna at 60 GHz

2017 ◽  
Vol 7 (3) ◽  
pp. 1580
Author(s):  
Mohd Fairus Mohd Yusoff ◽  
Ronan Sauleau ◽  
Zaharah Johari ◽  
Mohamad Kamal A. Rahim ◽  
Huda A. Majid
Keyword(s):  
Reflection Coefficient ◽  
Circular Polarization ◽  
Axial Ratio ◽  
Unit Cell ◽  
60 Ghz ◽  
Radiation Patterns ◽  
Circularly Polarized ◽  
Left Handed ◽  
Antenna Directivity ◽  
Reflectarray Antenna

A novel right-handed circular polarization (RHCP) folded reflectarray antenna with optimized parameters is presented at 60GHz. The RHCP folded reflectarray antenna is designed using left handed circularly polarized selective surface (LHCPSS) Pierrot unit cell. Through simulation, it is shown that the antenna operates well at 60GHz. The maximum antenna directivity is 19dB with a reflection coefficient below -15dB. The radiation patterns showed good responses with side lobes level below -10dB. In addition, the best axial ratio at 60GHz is achieved as 0.75dB.

A Broadband Circularly Polarized Cross-slotted Patch Antenna with Horizontal Meandered Strip (HMS)

Frequenz ◽  
2020 ◽  
Vol 74 (5-6) ◽  
pp. 191-199
Author(s):  
M. K. Verma ◽  
Binod K. Kanaujia ◽  
J. P. Saini ◽  
Padam S. Saini
Keyword(s):  
Circular Polarization ◽  
Patch Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Radiation Patterns ◽  
Circularly Polarized ◽  
Feeding Technique

AbstractA broadband circularly polarized slotted square patch antenna with horizontal meandered strip (HMS) is presented and studied. The HMS feeding technique provides the good impedance matching and broadside symmetrical radiation patterns. A set of cross asymmetrical slots are etched on the radiating patch to realize the circular polarization. An electrically small stub is added on the edge of the antenna for further improvement in performance. Measured 10-dB impedance bandwidth (IBW) and 3-dB axial ratio bandwidth (ARBW) of the proposed antenna are 32.31 % (3.14–4.35 GHz) and 20.91 % (3.34–4.12 GHz), respectively. The gain of the antenna is varied from 3.5 to 4.86dBi within 3-dB ARBW. Measured results matched well with the simulated results.

scholarly journals Simple design of efficient broadband multifunctional polarization converter for X-band applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Thi Kim Thu Nguyen ◽  
Thi Minh Nguyen ◽  
Hong Quang Nguyen ◽  
Thanh Nghia Cao ◽  
Dac Tuyen Le ◽  
...  
Keyword(s):  
Circular Polarization ◽  
Incident Angle ◽  
Polarization Conversion ◽  
Simple Design ◽  
Cross Polarization ◽  
Polarization Converter ◽  
Frequency Bands ◽  
X Band ◽  
Cost Efficient ◽  
Patch Resonators

AbstractA simple design of a broadband multifunctional polarization converter using an anisotropic metasurface for X-band application is proposed. The proposed polarization converter consists of a periodic array of the two-corner-cut square patch resonators based on the FR-4 substrate that achieves both cross-polarization and linear-to-circular polarization conversions. The simulated results show that the polarization converter displays the linear cross-polarization conversion in the frequency range from 8 to 12 GHz with the polarization conversion efficiency above 90%. The efficiency is kept higher than 80% with wide incident angle up to 45°. Moreover, the proposed design achieves the linear-to-circular polarization conversion at two frequency bands of 7.42–7.6 GHz and 13–13.56 GHz. A prototype of the proposed polarization converter is fabricated and measured, showing a good agreement between the measured and simulated results. The proposed polarization converter exhibits excellent performances such as simple structure, multifunctional property, and large cost-efficient bandwidth and wide incident angle insensitivity in the linear cross polarization conversion, which can be useful for X-band applications. Furthermore, this structure can be extended to design broadband polarization converters in other frequency bands.

3D Printed Wideband Circularly Polarized Pyramidal Horn Antenna with Binomial Polarizer for CP-SAR Application

2020 ◽  
Author(s):  
Agus Hendra Wahyudi ◽  
Josaphat Tetuko Sri Sumantyo ◽  
Folin Oktafiani ◽  
Hardi Nusantara ◽  
Ari Sugeng Budiyanta ◽  
...  
Keyword(s):  
Horn Antenna ◽  
Circularly Polarized ◽  
Pyramidal Horn ◽  
3D Printed
Sign in / Sign up

Export Citation Format

Share Document